Track Rules
Dip Switch #1:
1-8 = OFF
Dip Switch #2:
1-2 = OFF
3 = ON/OFF [Upright/Table]
4-8 = OFF
Note: The above Dip Switches, are not only the FACTORY DEFAULT settings, but are also the correct Twin Galaxies Tournament Settings for this title and will provide the following settings;
3 Lives
Bonus Life @ 50,000 & Every 80,000 After
Easy Difficulty
Bonus Life = 50K then every 80K
SPECIAL NOTE - it is possible to leech extensively, though with difficulty, in every odd-numbered stage. Therefore excessive leeching will be evaluated at the discretion of the referee.
Additional Info
PCB need not be shown. Game settings as defined in the track description or rules must be able to be verified visually, either by info on the game play screen or by showing the game settings screen in system mode, setup mode, etc. If a game setting is not specified by the track description or rules, that setting is to be left at the factory/default game setting by using the system option on the multi PCB to restore factory/default game settings. If the multi PCB does not have a system option to restore factory/default game settings, the game setting(s) to be left at default should best reflect the factory/default game settings on the original dedicated arcade PCB whenever possible.
The main purpose of XXX-Multi tracks are for arcade cabinets :
- arcade cabinets with the original PCB and ROM where the gamer play at a shaopping maill or an arcade where the gamer is not able to record the inside of the cabinet as proof that the cabinet do contain the original PCB and ROM
- arcade cabinets with non-original PCB and ROM (clones) that play like original arcade game PCB/ROM
- arcade cabinets with ICADE setup i.e. multi 1 in 60 & 1 in 120 ect.. cabinets
- MAME Arcade Cabinets with proof that no playback/pre-recording of an .INP file was used but the game is played in real-time.
- MAME Arcade Cabinets using Wolfmame
2.10.2020 - Rules Updated