- Game
- MAME History, "P" ROM sets
This page is a chapter in 'Game Exploring MAME history for TG rules'
A collection of notes from the legacy of MAME for checking INP files against rules.
p47acesa, p47aces
Note: two ROM sets are represented here with the changeover at 0.219.
MAME History:
- 0.106u3: Added missing 'Bonus Life' dipswitch.
- 0.218: Fixed rom names. Changed description to 'P-47 Aces (ver 1.0)'.
- 0.219: Derick2k, rtw and trap15 added P-47 Aces (ver 1.1). Renamed (p47aces) to (p47acesa).
- 0.227: Added machine\jaleco_ms32_sysctrl.cpp/h, mame\etc\gen_device_defs.py and layout\f1superb.lay. Wrote a Jaleco MS32 System Control Unit device [Angelo Salese, Alex Marshall]. Fixed sprite transfer direction bit, removes an ugly per-game table. Fixed drawing honoring the wrong variable and causing a segmentation fault. Correct palette size. Move optional features (YUV, zooming) at init time (video\ms32_sprite.cpp) [Angelo Salese]. Changed VSync to 59.410646 7Hz.
P-47 Aces (ver 1.0)
-------------------
ROM set changed: yes
0.106-0.217: p47aces - "P-47 Aces"
0.218 : p47aces - "P-47 Aces (ver 1.0)"
0.219-0.255: p47acesa - "P-47 Aces (ver 1.0)"
Resolution, 0.106-0.226: 320x224 @ 60.000000Hz
Resolution, 0.227-0.255: 320x224 @ 59.410646Hz
TG Game Entry: https://www.twingalaxies.com/game/p-47-aces/mame/
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78861
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78862
P-47 Aces (ver 1.1)
-------------------
Note: not currently represented on TG.
ROM set changed: no. Added in 0.219.
0.219-0.255: p47aces - "P-47 Aces (ver 1.1)"
Resolution, 0.219-0.226: 320x224 @ 60.000000Hz
Resolution, 0.227-0.255: 320x224 @ 59.410646Hz
Rules: [no current tracks]
Service Mode
Typical Jaleco MegaSystem 32 BIOS.
Service Mode reflects the local configuration after playback ends, not the recording. Service Mode is accessed using the DIP switch and then a reset must occur, thus cannot be recorded in an INP. Navigation is with P1 Up and Down with selection via P1 Start. Service Mode configuration is read-only.
Default Settings:
From MAME 0.250 after entering service mode:
| 
| 
| 
| 
MAME History:
- 0.106u3: Added missing 'Bonus Life' dipswitch.
- 0.218: Fixed rom names. Changed description to 'P-47 Aces (ver 1.0)'.
- 0.219: Derick2k, rtw and trap15 added P-47 Aces (ver 1.1). Renamed (p47aces) to (p47acesa).
- 0.227: Added machine\jaleco_ms32_sysctrl.cpp/h, mame\etc\gen_device_defs.py and layout\f1superb.lay. Wrote a Jaleco MS32 System Control Unit device [Angelo Salese, Alex Marshall]. Fixed sprite transfer direction bit, removes an ugly per-game table. Fixed drawing honoring the wrong variable and causing a segmentation fault. Correct palette size. Move optional features (YUV, zooming) at init time (video\ms32_sprite.cpp) [Angelo Salese]. Changed VSync to 59.410646 7Hz.
P-47 Aces (ver 1.0)
-------------------
ROM set changed: yes
0.106-0.217: p47aces - "P-47 Aces"
0.218 : p47aces - "P-47 Aces (ver 1.0)"
0.219-0.255: p47acesa - "P-47 Aces (ver 1.0)"
Resolution, 0.106-0.226: 320x224 @ 60.000000Hz
Resolution, 0.227-0.255: 320x224 @ 59.410646Hz
TG Game Entry: https://www.twingalaxies.com/game/p-47-aces/mame/
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78861
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78862
P-47 Aces (ver 1.1)
-------------------
Note: not currently represented on TG.
ROM set changed: no. Added in 0.219.
0.219-0.255: p47aces - "P-47 Aces (ver 1.1)"
Resolution, 0.219-0.226: 320x224 @ 60.000000Hz
Resolution, 0.227-0.255: 320x224 @ 59.410646Hz
Rules: [no current tracks]
Service Mode
Typical Jaleco MegaSystem 32 BIOS.
Service Mode reflects the local configuration after playback ends, not the recording. Service Mode is accessed using the DIP switch and then a reset must occur, thus cannot be recorded in an INP. Navigation is with P1 Up and Down with selection via P1 Start. Service Mode configuration is read-only.
Default Settings:
From MAME 0.250 after entering service mode:
p47
ROM set changed: no
0.106-0.250: p47 - "P-47 - The Phantom Fighter (World)"
Resolution, 0.106-0.168: 256x224 @ 60.000000Hz
Resolution, 0.169-0.250: 256x224 @ 56.191350Hz
TG Game Entry: https://www.twingalaxies.com/game/p-...er-world/mame/
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78859
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78860
Default Settings
UI interface from 0.250.
| 
0.106-0.250: p47 - "P-47 - The Phantom Fighter (World)"
Resolution, 0.106-0.168: 256x224 @ 60.000000Hz
Resolution, 0.169-0.250: 256x224 @ 56.191350Hz
TG Game Entry: https://www.twingalaxies.com/game/p-...er-world/mame/
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78859
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78860
Default Settings
UI interface from 0.250.
pacland
ROM set changed: no.
0.106-0.114: pacland - "Pac-Land (set 1)"
0.114u1-0.210: pacland - "Pac-Land (World)"
From MAMEINFO.DAT:
- 0.114u1: Changed description to 'Pac-Land (World)' and clones (set 2) to 'Pac-Land (Japan newer)' and (set 3) to 'Pac-Land (Japan older)'.
- 0.203: Fixed incorrect value of 'Bonus Life' dipswitch [kunikuni]. Removed HD63701 MCFG macros [AJR].
Resolution, 0.106-0.152: 288x224 @ 60.606060Hz
Resolution, 0.153-0.210: 288x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/game/pac-land-set-1/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=23104
0.106-0.114: pacland - "Pac-Land (set 1)"
0.114u1-0.210: pacland - "Pac-Land (World)"
From MAMEINFO.DAT:
- 0.114u1: Changed description to 'Pac-Land (World)' and clones (set 2) to 'Pac-Land (Japan newer)' and (set 3) to 'Pac-Land (Japan older)'.
- 0.203: Fixed incorrect value of 'Bonus Life' dipswitch [kunikuni]. Removed HD63701 MCFG macros [AJR].
Resolution, 0.106-0.152: 288x224 @ 60.606060Hz
Resolution, 0.153-0.210: 288x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/game/pac-land-set-1/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=23104
pacmanf
ROM set changed: no
0.106-0.147: pacmanf - "Pac-Man (Midway, with speedup hack)"
0.148-0.199: pacmanf - "Pac-Man (Midway, speedup hack)"
Resolution, 0.106-0.113: 288x224 @ 60.606060Hz
Resolution, 0.114-0.199: 288x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/pac-man...dup-hack/mame/
Rules, Points [TG Settings]: https://www.twingalaxies.com/scores.php?scores=5229
Rules, Points [No Ghosts, No Fruit Challenge]: https://www.twingalaxies.com/scores.php?scores=200619
Note: do not use Service Mode (F2) to check after playback as it will have reverted to localised settings.
0.106-0.147: pacmanf - "Pac-Man (Midway, with speedup hack)"
0.148-0.199: pacmanf - "Pac-Man (Midway, speedup hack)"
Resolution, 0.106-0.113: 288x224 @ 60.606060Hz
Resolution, 0.114-0.199: 288x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/pac-man...dup-hack/mame/
Rules, Points [TG Settings]: https://www.twingalaxies.com/scores.php?scores=5229
Rules, Points [No Ghosts, No Fruit Challenge]: https://www.twingalaxies.com/scores.php?scores=200619
Note: do not use Service Mode (F2) to check after playback as it will have reverted to localised settings.
pacmania
ROM set changed: no
0.106-0.209: pacmania - "Pac-Mania"
Resolution, 0.106-0.152: 288x224 @ 60.606060Hz
Resolution, 0.153-0.209: 288x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/game/pac-mania/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=9806
Rules, Highest score on cherry board: https://www.twingalaxies.com/scores.php?scores=221899
NOTE: There are both hardware DIP switches & internal settings. Use Service Mode (F2) to access the internal settings after playback if not shown during playback.
0.106-0.209: pacmania - "Pac-Mania"
Resolution, 0.106-0.152: 288x224 @ 60.606060Hz
Resolution, 0.153-0.209: 288x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/game/pac-mania/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=9806
Rules, Highest score on cherry board: https://www.twingalaxies.com/scores.php?scores=221899
NOTE: There are both hardware DIP switches & internal settings. Use Service Mode (F2) to access the internal settings after playback if not shown during playback.
pacman
ROM set changes: no
0.53-0.260: pacman - "Pac-Man (Midway)"
MAME History:
- 0.111u3: Nathan Woods and Aaron Giles updated input port tokenization for MESS. Added support in MAME for "configuration" switches which are separate from dipswitches. These can be used to configure aspects of the game that don't correspond to dipswitches. Modified pacman.c to use configurations to control the speedup options. Removed '2x Speed Cheat' dipswitch.
- 0.113u2: Changed VSync to 60.606061 Hz.
- 0.142u3: Angelo Salese removed deprecat.h dependancy and updated irqs accordingly for Pacman driver. Removed fake input port and speedup cheat in PuckMan, Ms. Pac-Man and Pac-Man Plus.
- 0.144u7: Kanikani updated dipswitches in Pacman driver.
- 0.245: Logan B removed DIP locations from edge connectors/split-pads in Pac-Man. Added publisher for Titan (Pac-Man hack).
- 0.245: Cleaned up inputs. Marked Rack Test as PORT_TOGGLE. Changed fake DIP switches to machine configuration settings [Logan B].
Resolution, 0.106-0.113: 288x224 @ 60.606060Hz
Resolution, 0.114-0.260: 288x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/game/pac-man/mame/
Rules, Points [TG Settings]: https://www.twingalaxies.com/scores.php?scores=11853
Rules, High Score Challenge: https://www.twingalaxies.com/scores.php?scores=197901
Note: Between 2005 and 2016 the Pac-Man "Points [TG settings]" rules only permitted the puckman ROM set. Prior to 2005, only the pacman ROM set was permitted. 2016 has muddied the waters specifying "typically pacman".
Service Mode:
Typical Namco PuckMan style hardware.
Service Mode reflects the local configuration after playback ends, not the recording. Service Mode is accessed only during boot up (or reset) by holding the Service Mode (F2) button. Read-only configuration is displayed.
Default Settings:
MAME 0.106:
MAME 0.112:
MAME 0.143:
MAME 0.145:
MAME 0.245:
| 
MAME 0.250:
| 
From MAME 0.250 after entering service mode:
| 
| 
0.53-0.260: pacman - "Pac-Man (Midway)"
MAME History:
- 0.111u3: Nathan Woods and Aaron Giles updated input port tokenization for MESS. Added support in MAME for "configuration" switches which are separate from dipswitches. These can be used to configure aspects of the game that don't correspond to dipswitches. Modified pacman.c to use configurations to control the speedup options. Removed '2x Speed Cheat' dipswitch.
- 0.113u2: Changed VSync to 60.606061 Hz.
- 0.142u3: Angelo Salese removed deprecat.h dependancy and updated irqs accordingly for Pacman driver. Removed fake input port and speedup cheat in PuckMan, Ms. Pac-Man and Pac-Man Plus.
- 0.144u7: Kanikani updated dipswitches in Pacman driver.
- 0.245: Logan B removed DIP locations from edge connectors/split-pads in Pac-Man. Added publisher for Titan (Pac-Man hack).
- 0.245: Cleaned up inputs. Marked Rack Test as PORT_TOGGLE. Changed fake DIP switches to machine configuration settings [Logan B].
Resolution, 0.106-0.113: 288x224 @ 60.606060Hz
Resolution, 0.114-0.260: 288x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/game/pac-man/mame/
Rules, Points [TG Settings]: https://www.twingalaxies.com/scores.php?scores=11853
Rules, High Score Challenge: https://www.twingalaxies.com/scores.php?scores=197901
Note: Between 2005 and 2016 the Pac-Man "Points [TG settings]" rules only permitted the puckman ROM set. Prior to 2005, only the pacman ROM set was permitted. 2016 has muddied the waters specifying "typically pacman".
Service Mode:
Typical Namco PuckMan style hardware.
Service Mode reflects the local configuration after playback ends, not the recording. Service Mode is accessed only during boot up (or reset) by holding the Service Mode (F2) button. Read-only configuration is displayed.
Default Settings:
MAME 0.106:
MAME 0.112:
MAME 0.143:
MAME 0.145:
MAME 0.245:
MAME 0.250:
From MAME 0.250 after entering service mode:
pacman on MAME 0.245
With the change to Machine Configuration in MAME 0.245 it is no longer possible to very the Difficulty through the INP View of WolfMAME.
Resolution: 256x224 @ 60 Hz
Rules, Points [TG Settings]: https://www.twingalaxies.com/scores.php?scores=11853
ROMSet: Either the 'puckman' or 'pacman' ROM is acceptable; no other ROM is allowed.
Rack Test [Cheat]: Off
Service Mode: Off
Cabinet: Upright
Lives: 5
Bonus Life: 10000
Difficulty: Normal
Ghost Names: Normal
2x Speed Cheat: Disabled
Rules, High Score Challenge: https://www.twingalaxies.com/scores.php?scores=197901
Romsets:PuckMan is parent rom in MAME.The Puckman Japan sets are acceptable, the PacMan Midways sets are acceptable...any version which retains the same mazes and gameplay as traditional PacMan...Hacks not acceptable for this track.
Dip Switches:
Rack Test- Off
Service Mode- Off
Coinage- Player Choice, Freeplay acceptable
Lives- Player Choice, up to 5
Bonus Life- 10000
Difficulty- Normal
Speed- Normal
Sample correct TG:
MAME 0.245: Lives = 3
DSW1: offset 0x51, repeat every 0x30, typical value 0xC9
- DSW1: 0x03 (Coinage): 0x01 (1 Coin 1 Credit)
- DSW1: 0x0c (Lives): 0x08 (3)
- DSW1: 0x30 (Bonus_Life): 0x00 (10000)
- DSW1: 0x40 (Difficulty): 0x40 (Normal)
- DSW1: 0x80 (Ghost Names): 0x80 (Normal)
Sample INP hexdump after decompression! Lives = 3
MAME 0.245: Lives = 5
DSW1: offset 0x51, repeat every 0x30, typical value 0xC9
- DSW1: 0x03 (Coinage): 0x01 (1 Coin 1 Credit)
- DSW1: 0x0c (Lives): 0x0c (5)
- DSW1: 0x30 (Bonus_Life): 0x00 (10000)
- DSW1: 0x40 (Difficulty): 0x40 (Normal)
- DSW1: 0x80 (Ghost Names): 0x80 (Normal)
Sample INP hexdump after decompression! Lives = 3
Code:
# MAME 0.245 source snippets
// rom parent machine inp state init
GAME( 1980, pacman, puckman, pacman, pacman, pacman_state, empty_init, ROT90, "Namco (Midway license)", "Pac-Man (Midway)", MACHINE_SUPPORTS_SAVE )
static INPUT_PORTS_START( pacman )
PORT_START("IN0")
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_JOYSTICK_UP ) PORT_PLAYER(1) PORT_4WAY
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT ) PORT_PLAYER(1) PORT_4WAY
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT ) PORT_PLAYER(1) PORT_4WAY
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN ) PORT_PLAYER(1) PORT_4WAY
PORT_DIPNAME(0x10, 0x10, "Rack Test (Cheat)" ) PORT_CODE(KEYCODE_F1) PORT_DIPLOCATION("SW:7") PORT_TOGGLE
PORT_DIPSETTING( 0x10, DEF_STR( Off ) )
PORT_DIPSETTING( 0x00, DEF_STR( On ) )
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_COIN1 )
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_COIN2 )
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_SERVICE1 )
PORT_START("IN1")
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_JOYSTICK_UP ) PORT_PLAYER(2) PORT_4WAY PORT_COCKTAIL
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT ) PORT_PLAYER(2) PORT_4WAY PORT_COCKTAIL
PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT ) PORT_PLAYER(2) PORT_4WAY PORT_COCKTAIL
PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN ) PORT_PLAYER(2) PORT_4WAY PORT_COCKTAIL
PORT_SERVICE( 0x10, IP_ACTIVE_LOW )
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_START1 )
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_START2 )
PORT_CONFNAME(0x80, 0x80, DEF_STR( Cabinet ) )
PORT_CONFSETTING( 0x80, DEF_STR( Upright ) )
PORT_CONFSETTING( 0x00, DEF_STR( Cocktail ) )
PORT_START("DSW1")
PORT_DIPNAME( 0x03, 0x01, DEF_STR( Coinage ) ) PORT_DIPLOCATION("SW:1,2")
PORT_DIPSETTING( 0x03, DEF_STR( 2C_1C ) )
PORT_DIPSETTING( 0x01, DEF_STR( 1C_1C ) )
PORT_DIPSETTING( 0x02, DEF_STR( 1C_2C ) )
PORT_DIPSETTING( 0x00, DEF_STR( Free_Play ) )
PORT_DIPNAME( 0x0c, 0x08, DEF_STR( Lives ) ) PORT_DIPLOCATION("SW:3,4")
PORT_DIPSETTING( 0x00, "1" )
PORT_DIPSETTING( 0x04, "2" )
PORT_DIPSETTING( 0x08, "3" )
PORT_DIPSETTING( 0x0c, "5" )
PORT_DIPNAME( 0x30, 0x00, DEF_STR( Bonus_Life ) ) PORT_DIPLOCATION("SW:5,6")
PORT_DIPSETTING( 0x00, "10000" )
PORT_DIPSETTING( 0x10, "15000" )
PORT_DIPSETTING( 0x20, "20000" )
PORT_DIPSETTING( 0x30, DEF_STR( None ) )
PORT_CONFNAME(0x40, 0x40, DEF_STR( Difficulty ) ) // physical location for difficulty on puckman set is split-pad between R32 and C29
PORT_CONFSETTING( 0x40, DEF_STR( Normal ) )
PORT_CONFSETTING( 0x00, DEF_STR( Hard ) )
PORT_CONFNAME(0x80, 0x80, "Ghost Names" ) // physical location for ghostnames on puckman set is split-pad between C10 and C29
PORT_CONFSETTING( 0x80, DEF_STR( Normal ) )
PORT_CONFSETTING( 0x00, DEF_STR( Alternate ) )
PORT_START("DSW2")
PORT_BIT( 0xff, IP_ACTIVE_HIGH, IPT_UNUSED )
INPUT_PORTS_END
Resolution: 256x224 @ 60 Hz
Rules, Points [TG Settings]: https://www.twingalaxies.com/scores.php?scores=11853
ROMSet: Either the 'puckman' or 'pacman' ROM is acceptable; no other ROM is allowed.
Rack Test [Cheat]: Off
Service Mode: Off
Cabinet: Upright
Lives: 5
Bonus Life: 10000
Difficulty: Normal
Ghost Names: Normal
2x Speed Cheat: Disabled
Rules, High Score Challenge: https://www.twingalaxies.com/scores.php?scores=197901
Romsets:PuckMan is parent rom in MAME.The Puckman Japan sets are acceptable, the PacMan Midways sets are acceptable...any version which retains the same mazes and gameplay as traditional PacMan...Hacks not acceptable for this track.
Dip Switches:
Rack Test- Off
Service Mode- Off
Coinage- Player Choice, Freeplay acceptable
Lives- Player Choice, up to 5
Bonus Life- 10000
Difficulty- Normal
Speed- Normal
Sample correct TG:
MAME 0.245: Lives = 3
DSW1: offset 0x51, repeat every 0x30, typical value 0xC9
- DSW1: 0x03 (Coinage): 0x01 (1 Coin 1 Credit)
- DSW1: 0x0c (Lives): 0x08 (3)
- DSW1: 0x30 (Bonus_Life): 0x00 (10000)
- DSW1: 0x40 (Difficulty): 0x40 (Normal)
- DSW1: 0x80 (Ghost Names): 0x80 (Normal)
Sample INP hexdump after decompression! Lives = 3
Code:
00000050 >c9<00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000080 >c9<00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000000b0 >c9<00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
MAME 0.245: Lives = 5
DSW1: offset 0x51, repeat every 0x30, typical value 0xC9
- DSW1: 0x03 (Coinage): 0x01 (1 Coin 1 Credit)
- DSW1: 0x0c (Lives): 0x0c (5)
- DSW1: 0x30 (Bonus_Life): 0x00 (10000)
- DSW1: 0x40 (Difficulty): 0x40 (Normal)
- DSW1: 0x80 (Ghost Names): 0x80 (Normal)
Sample INP hexdump after decompression! Lives = 3
Code:
00000050 >cd<00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000080 >cd<00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000000b0 >cd<00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
pacnpal
ROM set changed: no
0.106-0.196: pacnpal - "Pac & Pal"
MAME History:
- 0.115u4: Aaron Giles removed colortables from a number of drivers that didn't need them. Also converted pacman and mappy drivers to collapse the colortable and palette. Changed VSync to 60.606061 Hz and palettesize to 512 colors.
Resolution, 0.106-0.115: 288x224 @ 60.606060Hz
Resolution, 0.116-0.196: 288x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/game/pac-pal/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=7778
Service Mode:
Typical "Mappy" BIOS.
Service Mode reflects the local configuration after playback ends, not the recording. Service Mode is accessed by enabling the Service Mode DIP switch. The Service Mode button (F2) can be used to perform a restart while recording and thus DIP switches can be changed during recording coupled with a Service Mode button use. Any changes to the DIP settings after the display in the boot sequence will not take effect until the next Service Mode restart. DIPs are shown by the game (very briefly) during boot up (starting around frame 692 in the first boot).
Since 0.173, the conditional DIPs feature of this game affects WolfMAME's inpview. Verify settings with caution! ["Lives" affects "Bonus_Life"]
0.106-0.196: pacnpal - "Pac & Pal"
MAME History:
- 0.115u4: Aaron Giles removed colortables from a number of drivers that didn't need them. Also converted pacman and mappy drivers to collapse the colortable and palette. Changed VSync to 60.606061 Hz and palettesize to 512 colors.
Resolution, 0.106-0.115: 288x224 @ 60.606060Hz
Resolution, 0.116-0.196: 288x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/game/pac-pal/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=7778
Service Mode:
Typical "Mappy" BIOS.
Service Mode reflects the local configuration after playback ends, not the recording. Service Mode is accessed by enabling the Service Mode DIP switch. The Service Mode button (F2) can be used to perform a restart while recording and thus DIP switches can be changed during recording coupled with a Service Mode button use. Any changes to the DIP settings after the display in the boot sequence will not take effect until the next Service Mode restart. DIPs are shown by the game (very briefly) during boot up (starting around frame 692 in the first boot).
Since 0.173, the conditional DIPs feature of this game affects WolfMAME's inpview. Verify settings with caution! ["Lives" affects "Bonus_Life"]
pacplus
ROM set changed: no
0.106-0.193: pacplus - "Pac-Man Plus"
Resolution, 0.106-0.113: 288x224 @ 60.606060Hz
Resolution, 0.114-0.193: 288x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/pac-man-plus/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=7779
0.106-0.193: pacplus - "Pac-Man Plus"
Resolution, 0.106-0.113: 288x224 @ 60.606060Hz
Resolution, 0.114-0.193: 288x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/pac-man-plus/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=7779
paddlema
ROM set changed: no
0.106-0.175: paddlema - "Paddle Mania"
Resolution, 0.106-0.155: 256x224 @ 60.000000Hz
Resolution, 0.156-0.175: 256x224 @ 60.191409Hz
TG Game Entry: https://www.twingalaxies.com/scores....Paddle%20Mania
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78865
0.106-0.175: paddlema - "Paddle Mania"
Resolution, 0.106-0.155: 256x224 @ 60.000000Hz
Resolution, 0.156-0.175: 256x224 @ 60.191409Hz
TG Game Entry: https://www.twingalaxies.com/scores....Paddle%20Mania
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78865
palamedj
ROM set changed: yes
0.106-0.186: palamed - "Palamedes (Japan)"
0.187-0.194: palamedj - "Palamedes (Japan)"
MAME History:
- 0.187: caius and The Dumping Union added Palamedes (US). Renamed (palamed) to (palamedj).
Resolution, 0.106-0.194: 320x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/palamedes-japan/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78866
0.106-0.186: palamed - "Palamedes (Japan)"
0.187-0.194: palamedj - "Palamedes (Japan)"
MAME History:
- 0.187: caius and The Dumping Union added Palamedes (US). Renamed (palamed) to (palamedj).
Resolution, 0.106-0.194: 320x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/palamedes-japan/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78866
palamed
Note: two ROM sets represented here with changeover at 0.187.
MAME History:
- 0.187: caius and The Dumping Union added Palamedes (US). Renamed (palamed) to (palamedj).
Palamedes (Japan)
-----------------
ROM set changed: yes
0.106-0.186: palamed - "Palamedes (Japan)"
0.187-0.194: palamedj - "Palamedes (Japan)"
Resolution, 0.106-0.194: 320x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/palamedes-japan/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78866
Palamedes (US)
--------------
Note: not currently represented on TG.
ROM set changed: no. Added in 0.187
0.187-0.194: palamed - "Palamedes (US)"
Resolution, 0.187-0.194: 320x224 @ 60.000000Hz
Rules: [no current tracks]
MAME History:
- 0.187: caius and The Dumping Union added Palamedes (US). Renamed (palamed) to (palamedj).
Palamedes (Japan)
-----------------
ROM set changed: yes
0.106-0.186: palamed - "Palamedes (Japan)"
0.187-0.194: palamedj - "Palamedes (Japan)"
Resolution, 0.106-0.194: 320x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/palamedes-japan/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78866
Palamedes (US)
--------------
Note: not currently represented on TG.
ROM set changed: no. Added in 0.187
0.187-0.194: palamed - "Palamedes (US)"
Resolution, 0.187-0.194: 320x224 @ 60.000000Hz
Rules: [no current tracks]
pandoras
ROM set changed: no
0.106-0.205: pandoras - "Pandora's Palace"
Resolution, 0.106-0.205: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/pandoras-palace/mame/
Rules, Points [Marathon Settings]: https://www.twingalaxies.com/scores.php?scores=7780
Rules, Points [Tournament Settings - 5 Life Limit]: https://www.twingalaxies.com/scores.php?scores=7781
0.106-0.205: pandoras - "Pandora's Palace"
Resolution, 0.106-0.205: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/pandoras-palace/mame/
Rules, Points [Marathon Settings]: https://www.twingalaxies.com/scores.php?scores=7780
Rules, Points [Tournament Settings - 5 Life Limit]: https://www.twingalaxies.com/scores.php?scores=7781
pandora
ROM set changed: no
0.106-0.205: pandoras - "Pandora's Palace"
Resolution, 0.106-0.205: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/pandoras-palace/mame/
Rules, Points [Marathon Settings]: https://www.twingalaxies.com/scores.php?scores=7780
Rules, Points [Tournament Settings - 5 Life Limit]: https://www.twingalaxies.com/scores.php?scores=7781
0.106-0.205: pandoras - "Pandora's Palace"
Resolution, 0.106-0.205: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/pandoras-palace/mame/
Rules, Points [Marathon Settings]: https://www.twingalaxies.com/scores.php?scores=7780
Rules, Points [Tournament Settings - 5 Life Limit]: https://www.twingalaxies.com/scores.php?scores=7781
pang3b, pang3n, pang3
Note: two ROM sets represented here with changeover at 0.136u3.
MAME History:
- 0.126u4: Corrado Tomaselli verified and correct CPS1 refresh rate. Changed VSync to 59.610000 Hz.
- 0.136u3: Gerald (COY), B. Sparks, Smitdogg and The Dumping Union added Pang! 3 (Euro 950601). Changed description of clone 'Pang! 3 (Euro 950511)' to 'Pang! 3 (Euro 950511, not encrypted)'. Renamed (pang3) to (pang3n).
- 0.144u2: CPS-1 update [Team CPS-1]: Kold666 dumped and added PALs (2 of 3) to Pang! 3 and clones. Fixed pang3, pang3j to use proper 128KB EPROM PA3_11.11F instead of the one resized used by pang3b. Identified and documented Pang! 3 (bootleg) as a bootleg, added a note. Changed description of clone 'Pang! 3 (Euro 950511, not encrypted)' to 'Pang! 3 (bootleg)'. Renamed (pang3n) to (pang3b).
- 0.147u1: Changed CPS-1 video timings to SCREEN_RAW_PARAMS [Angelo Salese]. Changed VSync to 59.629403 Hz.
- 0.153: Cleanup (includes\cps1.h) [Osso]. Willow, Strider and Ghouls'n Ghosts have some changed factory setting defaults as stated from manual. Also noted differences in bonus live coverage where applicable [Tafoid]. Cleanup QSound. No practical changes here except that i removed support for LOG_WAVE raw sound filewriting. Updated soundstream before writing (tsk). Reg 3 is key on. Small fix to sample start and loop. Guru measured qsound music timing. Modified CPS1 video params [hap]. Eliminate pointless planar-to-chunky conversion of gfx ROMs, just decode them as-is [Alex Jackson]. Changed VSync to 59.637405 Hz.
- 0.220: Hammy, rtw and ekorz added clone Pang! 3 (bootleg, set 2). Note: This bootleg uses an original B-13 chip top and original main board. ROM content is the same as pang3, but split differently. Changed description of clone (bootleg) to 'Pang! 3 (bootleg, set 1)'.
Pang! 3 (bootleg) (of Euro 950511)
-----------------
ROM set changed: yes
0.106-0.136: pang3 - "Pang! 3 (Euro 950511)"
0.136u3-0.144: pang3n - "Pang! 3 (Euro 950511, not encrypted)"
0.144u2-0.219: pang3b - "Pang! 3 (bootleg)"
0.220-0.255: pang3b - "Pang! 3 (bootleg, set 1)"
Resolution, 0.106-0.126: 384x224 @ 60.000000Hz
Resolution, 0.127-0.147: 384x224 @ 59.610000Hz
Resolution, 0.148-0.152: 384x224 @ 59.629403Hz
Resolution, 0.153-0.255: 384x224 @ 59.637405Hz
TG Game Entry: https://www.twingalaxies.com/game/pa...o-950511/mame/
Rules, Points [Normal Mode - Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78873
Rules, Points [Normal Mode - Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78874
Rules, Points [Panic Mode - Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78875
Rules, Points [Panic Mode - Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78876
Pang! 3 (Euro 950601)
---------------------
Not: not currently represented on TG.
ROM set changed: no. Added in 0.136u3.
0.136u3-0.255: pang3 - "Pang! 3 (Euro 950601)"
Resolution, 0.136-0.147: 384x224 @ 59.610000Hz
Resolution, 0.148-0.152: 384x224 @ 59.629403Hz
Resolution, 0.153-0.255: 384x224 @ 59.637405Hz
Rules: [no current tracks]
Service Mode:
Typical Capcom CPS-1 BIOS.
Service Mode is accessed using the Game Mode DIP switch or the Service button (F2) which toggles the DIP switch. Navigation is with P1 Up and P1 Down, selection with P1 Button 1.
Default Settings:
MAME 0.106:
MAME 0.250:
BIOS Defaults:
MAME History:
- 0.126u4: Corrado Tomaselli verified and correct CPS1 refresh rate. Changed VSync to 59.610000 Hz.
- 0.136u3: Gerald (COY), B. Sparks, Smitdogg and The Dumping Union added Pang! 3 (Euro 950601). Changed description of clone 'Pang! 3 (Euro 950511)' to 'Pang! 3 (Euro 950511, not encrypted)'. Renamed (pang3) to (pang3n).
- 0.144u2: CPS-1 update [Team CPS-1]: Kold666 dumped and added PALs (2 of 3) to Pang! 3 and clones. Fixed pang3, pang3j to use proper 128KB EPROM PA3_11.11F instead of the one resized used by pang3b. Identified and documented Pang! 3 (bootleg) as a bootleg, added a note. Changed description of clone 'Pang! 3 (Euro 950511, not encrypted)' to 'Pang! 3 (bootleg)'. Renamed (pang3n) to (pang3b).
- 0.147u1: Changed CPS-1 video timings to SCREEN_RAW_PARAMS [Angelo Salese]. Changed VSync to 59.629403 Hz.
- 0.153: Cleanup (includes\cps1.h) [Osso]. Willow, Strider and Ghouls'n Ghosts have some changed factory setting defaults as stated from manual. Also noted differences in bonus live coverage where applicable [Tafoid]. Cleanup QSound. No practical changes here except that i removed support for LOG_WAVE raw sound filewriting. Updated soundstream before writing (tsk). Reg 3 is key on. Small fix to sample start and loop. Guru measured qsound music timing. Modified CPS1 video params [hap]. Eliminate pointless planar-to-chunky conversion of gfx ROMs, just decode them as-is [Alex Jackson]. Changed VSync to 59.637405 Hz.
- 0.220: Hammy, rtw and ekorz added clone Pang! 3 (bootleg, set 2). Note: This bootleg uses an original B-13 chip top and original main board. ROM content is the same as pang3, but split differently. Changed description of clone (bootleg) to 'Pang! 3 (bootleg, set 1)'.
Pang! 3 (bootleg) (of Euro 950511)
-----------------
ROM set changed: yes
0.106-0.136: pang3 - "Pang! 3 (Euro 950511)"
0.136u3-0.144: pang3n - "Pang! 3 (Euro 950511, not encrypted)"
0.144u2-0.219: pang3b - "Pang! 3 (bootleg)"
0.220-0.255: pang3b - "Pang! 3 (bootleg, set 1)"
Resolution, 0.106-0.126: 384x224 @ 60.000000Hz
Resolution, 0.127-0.147: 384x224 @ 59.610000Hz
Resolution, 0.148-0.152: 384x224 @ 59.629403Hz
Resolution, 0.153-0.255: 384x224 @ 59.637405Hz
TG Game Entry: https://www.twingalaxies.com/game/pa...o-950511/mame/
Rules, Points [Normal Mode - Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78873
Rules, Points [Normal Mode - Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78874
Rules, Points [Panic Mode - Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78875
Rules, Points [Panic Mode - Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78876
Pang! 3 (Euro 950601)
---------------------
Not: not currently represented on TG.
ROM set changed: no. Added in 0.136u3.
0.136u3-0.255: pang3 - "Pang! 3 (Euro 950601)"
Resolution, 0.136-0.147: 384x224 @ 59.610000Hz
Resolution, 0.148-0.152: 384x224 @ 59.629403Hz
Resolution, 0.153-0.255: 384x224 @ 59.637405Hz
Rules: [no current tracks]
Service Mode:
Typical Capcom CPS-1 BIOS.
Service Mode is accessed using the Game Mode DIP switch or the Service button (F2) which toggles the DIP switch. Navigation is with P1 Up and P1 Down, selection with P1 Button 1.
Default Settings:
MAME 0.106:
MAME 0.250:
BIOS Defaults:
pangpoms
ROM set changed: no
0.106-0.122: pangpoms - "Pang Poms"
0.123-0.255: pangpoms - "Pang Pom's"
MAME History:
- 0.122u6: Brian Troha changed description to 'Pang Pom's' and clone (Mitchell) to 'Pang Pom's (Mitchell)'.
- 0.144u3: Fixed visible area in all Metro games. Changed VSync to 59.922743 Hz.
- 0.146u1: hap fixed regression in the Metro driver. Redo deprecat removal for Metro driver. Updated video\metro.c. This fixes black screen in 3kokushi, karatour, ladykill and moegonta or offset screens and/or misplaced graphics. Changed visible area and VSync in most games.
- 0.192: Added video\imagetek_i4100.cpp/h. ACCESSING_BITS cleanup. Configure I4100/I4220/I4300 VDP the normal way with its standard XTAL [AJR]. Videoregs are read-backable. This fixes sprite layer disappears entirely in Blazing Tornado after completing single player game. Added sprite x/y center point registers, removed screen check hack. Rewritten Imagetek I4100/I4220/I4300 video display processor family, hooked it up to Metro driver [Angelo Salese]. Changed VSync to 58.232800 Hz except Bang Bang Ball.
Resolution, 0.106-0.144: 360x224 @ 60.000000Hz
Resolution, 0.145-0.146: 360x240 @ 59.922743Hz
Resolution, 0.147-0.191: 360x224 @ 60.000000Hz
Resolution, 0.192-0.255: 360x224 @ 58.232800Hz
TG Game Entry: https://www.twingalaxies.com/game/pang-poms/mame/
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78871
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78872
Service Mode:
Typical Metro Games hardware/BIOS.
Service Mode reflects the local configuration after playback ends, not the recording. Service Mode is accessed by enabling the DIP Switch which can be toggled with the Service Mode Button (F2) followed by a reset thus cannot be recorded in an INP. A cycle of test screens are progressed through with simultaneous use of P1 Start and P2 Start to navigate. DIP switches are shown in read-only binary form on the input test screen.
Default Settings:
From MAME 0.250 after entering service mode:
| 
0.106-0.122: pangpoms - "Pang Poms"
0.123-0.255: pangpoms - "Pang Pom's"
MAME History:
- 0.122u6: Brian Troha changed description to 'Pang Pom's' and clone (Mitchell) to 'Pang Pom's (Mitchell)'.
- 0.144u3: Fixed visible area in all Metro games. Changed VSync to 59.922743 Hz.
- 0.146u1: hap fixed regression in the Metro driver. Redo deprecat removal for Metro driver. Updated video\metro.c. This fixes black screen in 3kokushi, karatour, ladykill and moegonta or offset screens and/or misplaced graphics. Changed visible area and VSync in most games.
- 0.192: Added video\imagetek_i4100.cpp/h. ACCESSING_BITS cleanup. Configure I4100/I4220/I4300 VDP the normal way with its standard XTAL [AJR]. Videoregs are read-backable. This fixes sprite layer disappears entirely in Blazing Tornado after completing single player game. Added sprite x/y center point registers, removed screen check hack. Rewritten Imagetek I4100/I4220/I4300 video display processor family, hooked it up to Metro driver [Angelo Salese]. Changed VSync to 58.232800 Hz except Bang Bang Ball.
Resolution, 0.106-0.144: 360x224 @ 60.000000Hz
Resolution, 0.145-0.146: 360x240 @ 59.922743Hz
Resolution, 0.147-0.191: 360x224 @ 60.000000Hz
Resolution, 0.192-0.255: 360x224 @ 58.232800Hz
TG Game Entry: https://www.twingalaxies.com/game/pang-poms/mame/
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78871
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78872
Service Mode:
Typical Metro Games hardware/BIOS.
Service Mode reflects the local configuration after playback ends, not the recording. Service Mode is accessed by enabling the DIP Switch which can be toggled with the Service Mode Button (F2) followed by a reset thus cannot be recorded in an INP. A cycle of test screens are progressed through with simultaneous use of P1 Start and P2 Start to navigate. DIP switches are shown in read-only binary form on the input test screen.
Default Settings:
From MAME 0.250 after entering service mode:
pang
ROM set changed: no
0.106-0.255: pang - "Pang (World)"
MAME History:
- 0.133u1: Corrado Tomaselli changed VSync to 57.42 Hz in block, cworld, dokaben, hatena, pang, qsangoku, qtono1 and spang.
Resolution, 0.106-0.133: 384x240 @ 60.000000Hz
Resolution, 0.134-0.255: 384x240 @ 57.420000Hz
TG Game Entry: https://www.twingalaxies.com/game/pang-world/mame/
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=7782
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78867
Service Mode:
Typical Capcom Mitchell hardware.
All relevant rules are covered by internal settings. If not shown during playback, use F2 to access after playback completed.
Default settings:
0.106-0.255: pang - "Pang (World)"
MAME History:
- 0.133u1: Corrado Tomaselli changed VSync to 57.42 Hz in block, cworld, dokaben, hatena, pang, qsangoku, qtono1 and spang.
Resolution, 0.106-0.133: 384x240 @ 60.000000Hz
Resolution, 0.134-0.255: 384x240 @ 57.420000Hz
TG Game Entry: https://www.twingalaxies.com/game/pang-world/mame/
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=7782
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78867
Service Mode:
Typical Capcom Mitchell hardware.
All relevant rules are covered by internal settings. If not shown during playback, use F2 to access after playback completed.
Default settings:
panicbom
ROM set changed: no
0.106-0.194: panicbom - "Panic Bomber"
Resolution, 0.106-0.113: 320x224 @ 59.185608Hz
Resolution, 0.114-0.194: 320x224 @ 59.185606Hz
TG Game Entry: https://www.twingalaxies.com/game/panic-bomber/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78877
0.106-0.194: panicbom - "Panic Bomber"
Resolution, 0.106-0.113: 320x224 @ 59.185608Hz
Resolution, 0.114-0.194: 320x224 @ 59.185606Hz
TG Game Entry: https://www.twingalaxies.com/game/panic-bomber/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78877
panicstr
ROM set changed: no
0.106-0.175: panicstr - "Panic Street (Japan)"
Resolution, 0.106-0.125: 320x240 @ 60.000000Hz
Resolution, 0.126-0.175: 320x240 @ 59.597100Hz
TG Game Entry: https://www.twingalaxies.com/scores....ic%20Street%20[Japan]
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78878
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78879
0.106-0.175: panicstr - "Panic Street (Japan)"
Resolution, 0.106-0.125: 320x240 @ 60.000000Hz
Resolution, 0.126-0.175: 320x240 @ 59.597100Hz
TG Game Entry: https://www.twingalaxies.com/scores....ic%20Street%20[Japan]
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78878
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78879
panic
ROM set changed: no
0.106-0.255: panic - "Space Panic (version E)"
MAME History:
- 0.228: Added raw screen timing parameters based on schematics [AJR]. Changed VSync to 58.639833 Hz.
Resolution, 0.106-0.227: 256x192 @ 60.000000Hz
Resolution, 0.228-0.255: 256x192 @ 58.639833Hz
TG Game Entry: https://www.twingalaxies.com/game/sp...ersion-e/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=7817
Service Mode:
Typical Universal "Cosmic Alien"-style hardware.
No service mode.
Default Settings:
MAME 0.106:
| MAME 0.250: 
0.106-0.255: panic - "Space Panic (version E)"
MAME History:
- 0.228: Added raw screen timing parameters based on schematics [AJR]. Changed VSync to 58.639833 Hz.
Resolution, 0.106-0.227: 256x192 @ 60.000000Hz
Resolution, 0.228-0.255: 256x192 @ 58.639833Hz
TG Game Entry: https://www.twingalaxies.com/game/sp...ersion-e/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=7817
Service Mode:
Typical Universal "Cosmic Alien"-style hardware.
No service mode.
Default Settings:
MAME 0.106:
paperboy
ROM set changed: no
0.106-0.255: paperboy - "Paperboy (rev 3)"
MAME History:
- 0.122u5: Atari System 2 driver cleanup [Aaron Giles]: Proper video timing. Full memory maps. Save state support. Removed 720 sound CPU hack in favor of prepopulated EEPROM like the other games. Changed VSync to 60.096154Hz.
Resolution, 0.106-0.122: 512x384 @ 60.000000Hz
Resolution, 0.123-0.258: 512x384 @ 60.096154Hz
TG Game Entry: https://www.twingalaxies.com/game/paperboy-rev-3/mame/
Rules, Points [Easy Street]: https://www.twingalaxies.com/scores.php?scores=78880
Rules, Points [Grand Slam Score]: https://www.twingalaxies.com/scores.php?scores=78881
Rules, Points [Hard Way]: https://www.twingalaxies.com/scores.php?scores=78882
Rules, Points [Middle Road]: https://www.twingalaxies.com/scores.php?scores=78883
Service Mode:
Typical Atari System 2 hardware.
Service Mode reflects the local configuration after playback ends, not the recording. Service Mode is accessed only by using the DIP switch. A series of test screens are available in service mode which are progressed through using P1 Button 2. Some of the tests are interactive but not the settings configuration.
Default Settings:
MAME 0.106:
MAME 0.250:
From MAME 0.250 after entering service mode:
| 
0.106-0.255: paperboy - "Paperboy (rev 3)"
MAME History:
- 0.122u5: Atari System 2 driver cleanup [Aaron Giles]: Proper video timing. Full memory maps. Save state support. Removed 720 sound CPU hack in favor of prepopulated EEPROM like the other games. Changed VSync to 60.096154Hz.
Resolution, 0.106-0.122: 512x384 @ 60.000000Hz
Resolution, 0.123-0.258: 512x384 @ 60.096154Hz
TG Game Entry: https://www.twingalaxies.com/game/paperboy-rev-3/mame/
Rules, Points [Easy Street]: https://www.twingalaxies.com/scores.php?scores=78880
Rules, Points [Grand Slam Score]: https://www.twingalaxies.com/scores.php?scores=78881
Rules, Points [Hard Way]: https://www.twingalaxies.com/scores.php?scores=78882
Rules, Points [Middle Road]: https://www.twingalaxies.com/scores.php?scores=78883
Service Mode:
Typical Atari System 2 hardware.
Service Mode reflects the local configuration after playback ends, not the recording. Service Mode is accessed only by using the DIP switch. A series of test screens are available in service mode which are progressed through using P1 Button 2. Some of the tests are interactive but not the settings configuration.
Default Settings:
MAME 0.106:
MAME 0.250:
From MAME 0.250 after entering service mode:
parodius
ROM set changed: no
0.106-0.140: parodius - "Parodius DA! (World)"
0.141-0.175: parodius - "Parodius DA! (World, set 1)"
Resolution, 0.106-0.175: 288x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....odius%20DA!%20[World]
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78886
0.106-0.140: parodius - "Parodius DA! (World)"
0.141-0.175: parodius - "Parodius DA! (World, set 1)"
Resolution, 0.106-0.175: 288x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....odius%20DA!%20[World]
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78886
pass
ROM set changed: no
0.106-0.255: pass - "Pass"
Resolution, 0.106-0.255: 320x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/pass/mame/
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78887
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78888
Service Mode:
No service mode.
Default Settings:
0.106-0.255: pass - "Pass"
Resolution, 0.106-0.255: 320x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/pass/mame/
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78887
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78888
Service Mode:
No service mode.
Default Settings:
pbaction
ROM set changed: no
0.106-0.260: pbaction - "Pinball Action (set 1)"
MAME History:
- 0.143u3: Brian Troha added DIP locations to Pinball Action and clones.
Resolution, 0.106-0.260: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/pi...on-set-1/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=7787
Service Mode:
Typical Tecmo Pinball Action hardware.
No service mode found. - Barthax, Nov 2023.
Default Settings:
MAME 0.106:
MAME 0.144:
MAME 0.250:
0.106-0.260: pbaction - "Pinball Action (set 1)"
MAME History:
- 0.143u3: Brian Troha added DIP locations to Pinball Action and clones.
Resolution, 0.106-0.260: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/pi...on-set-1/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=7787
Service Mode:
Typical Tecmo Pinball Action hardware.
No service mode found. - Barthax, Nov 2023.
Default Settings:
MAME 0.106:
MAME 0.144:
MAME 0.250:
pballoon
ROM set changed: no
0.106-0.209: pballoon - "Pioneer Balloon"
Resolution, 0.106-0.113: 256x224 @ 61.246746Hz
Resolution, 0.114-0.128: 256x224 @ 61.246745Hz
Resolution, 0.129-0.193: 256x224 @ 61.000000Hz
Resolution, 0.194-0.209: 256x224 @ 61.246745Hz
TG Game Entry: https://www.twingalaxies.com/game/pioneer-balloon/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=9829
0.106-0.209: pballoon - "Pioneer Balloon"
Resolution, 0.106-0.113: 256x224 @ 61.246746Hz
Resolution, 0.114-0.128: 256x224 @ 61.246745Hz
Resolution, 0.129-0.193: 256x224 @ 61.000000Hz
Resolution, 0.194-0.209: 256x224 @ 61.246745Hz
TG Game Entry: https://www.twingalaxies.com/game/pioneer-balloon/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=9829
pbanchoa, pbancho
Note: two ROM sets represented here with changeover at 0.255.
Gyakuten!! Puzzle Bancho (Japan, set 2)
---------------
ROM set changed: yes
0.106-0.254: pbancho - "Gyakuten!! Puzzle Bancho (Japan)"
0.255 : pbanchoa - "Gyakuten!! Puzzle Bancho (Japan, set 2)"
MAME History:
- 0.143u3: Brian Troha added notes about the difference of dipswitch settings as reported by Service Mode. Correct a couple of dipswitches and added DIP locations to Gyakuten!! Puzzle Bancho.
- 0.255: twistedsymphony added Gyakuten!! Puzzle Bancho (Japan, set 1). Changed 'Gyakuten!! Puzzle Bancho (Japan)' to clone 'Gyakuten!! Puzzle Bancho (Japan, set 2)'. Renamed (pbancho) to (pbanchoa).
Resolution, 0.106-0.255: 320x240 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/gy...ho-japan/mame/
Rules, Points [Puzzle Mode]: https://www.twingalaxies.com/scores.php?scores=70615
Rules, Points [V.S. CPU Mode]: https://www.twingalaxies.com/scores.php?scores=70616
Gyakuten!! Puzzle Bancho (Japan, set 1)
---------------
ROM set changed: no. Added in 0.255.
0.106-0.254: NOT SUPPORTED
0.255 : pbancho - "Gyakuten!! Puzzle Bancho (Japan, set 1)"
Resolution, 0.255 : 320x240 @ 60.000000Hz
Rules: [no current tracks]
Gyakuten!! Puzzle Bancho (Japan, set 2)
---------------
ROM set changed: yes
0.106-0.254: pbancho - "Gyakuten!! Puzzle Bancho (Japan)"
0.255 : pbanchoa - "Gyakuten!! Puzzle Bancho (Japan, set 2)"
MAME History:
- 0.143u3: Brian Troha added notes about the difference of dipswitch settings as reported by Service Mode. Correct a couple of dipswitches and added DIP locations to Gyakuten!! Puzzle Bancho.
- 0.255: twistedsymphony added Gyakuten!! Puzzle Bancho (Japan, set 1). Changed 'Gyakuten!! Puzzle Bancho (Japan)' to clone 'Gyakuten!! Puzzle Bancho (Japan, set 2)'. Renamed (pbancho) to (pbanchoa).
Resolution, 0.106-0.255: 320x240 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/gy...ho-japan/mame/
Rules, Points [Puzzle Mode]: https://www.twingalaxies.com/scores.php?scores=70615
Rules, Points [V.S. CPU Mode]: https://www.twingalaxies.com/scores.php?scores=70616
Gyakuten!! Puzzle Bancho (Japan, set 1)
---------------
ROM set changed: no. Added in 0.255.
0.106-0.254: NOT SUPPORTED
0.255 : pbancho - "Gyakuten!! Puzzle Bancho (Japan, set 1)"
Resolution, 0.255 : 320x240 @ 60.000000Hz
Rules: [no current tracks]
pbball96
ROM set changed: yes
0.106-0.148: pbball96 - "Powerful Baseball '96 (GV017 Japan 1.03)"
0.148u5-0.208: powyak96 - "Jikkyou Powerful Pro Yakyuu '96 (GV017 Japan 1.03)"
From MAMEINFO.DAT:
- 0.148u5: Fabio Priuli changed description to 'Jikkyou Powerful Pro Yakyuu '96 (GV017 Japan 1.03)'. Renamed (pbball96) to (powyak96).
Resolution, 0.106-0.208: 640x480 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/po...apan-103/mame/
Rules, Biggest Blowout: https://www.twingalaxies.com/scores.php?scores=78966
NOTE: All relevant rules are covered by internal settings. If not shown during playback, use F2 to access after playback completed.
0.106-0.148: pbball96 - "Powerful Baseball '96 (GV017 Japan 1.03)"
0.148u5-0.208: powyak96 - "Jikkyou Powerful Pro Yakyuu '96 (GV017 Japan 1.03)"
From MAMEINFO.DAT:
- 0.148u5: Fabio Priuli changed description to 'Jikkyou Powerful Pro Yakyuu '96 (GV017 Japan 1.03)'. Renamed (pbball96) to (powyak96).
Resolution, 0.106-0.208: 640x480 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/po...apan-103/mame/
Rules, Biggest Blowout: https://www.twingalaxies.com/scores.php?scores=78966
NOTE: All relevant rules are covered by internal settings. If not shown during playback, use F2 to access after playback completed.
pbillian
ROM set changed: no
0.106-0.175: pbillian - "Prebillian"
Resolution, 0.106-0.175: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....ame=Prebillian
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78967
0.106-0.175: pbillian - "Prebillian"
Resolution, 0.106-0.175: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....ame=Prebillian
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78967
pbillrd
ROM set changed: no
0.106-0.175: pbillrd - "Perfect Billiard"
Resolution, 0.106-0.147: 256x224 @ 60.000000Hz
Resolution, 0.148-0.175: 256x224 @ 59.410646Hz
TG Game Entry: https://www.twingalaxies.com/scores....ect%20Billiard
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78893
0.106-0.175: pbillrd - "Perfect Billiard"
Resolution, 0.106-0.147: 256x224 @ 60.000000Hz
Resolution, 0.148-0.175: 256x224 @ 59.410646Hz
TG Game Entry: https://www.twingalaxies.com/scores....ect%20Billiard
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78893
pblbeach
ROM set changed: no
0.106-0.255: pblbeach - "Pebble Beach - The Great Shot (JUE 950913 V0.990)"
MAME History:
- 0.131u3: Added dipswitches 'UNK' and 7x 'Unknown'.
- 0.133u1: Angelo Salese added screen raw parameters hook-up to the ST-V driver, fixes some of the current issues. Angelo Salese and Corrado Tomaselli hand-tuned ST-V pixel-clock to match measured fps from the PCB. Corrado Tomaselli verified and updated the vertical syncs on the ST-V motherboard. Changed visible area to 320x224 and VSync to 59.828244Hz.
- 0.142u5: More accurate pixel clocks for Sega Saturn / ST-V [Angelo Salese]. Angelo Salese fixed an ST-V window effect bug when it's in double interlace mode, fixes a graphic bug with Virtual Mahjong. Fixed a rather silly bug with SCU DSP execute flag. Oliver Stoeneberg fixed Sega Saturn / ST-V start-up crash that was happening on some ends. Added accurate hblank durations to Sega Saturn / ST-V HW [Angelo Salese, Corrado Tomaselli, Charles MacDonald]. Angelo Salese moved SMPC intback command inside a timer, removes a kludge for SMPC mask irq. Angelo Salese fixed emulation hangs in Pebble Beach and Funky Head Boxers. Fixed a rather silly bug with SCU DSP execute flag. Moved SMPC intback command inside a timer, removes a kludge for SMPC mask irq. Added CD/DA audio and changed VSync to 59.826048 Hz.
- 0.143: Changed SH-2 CPU1/2 clock speed to 28636360 Hz, 68000 CPU3 to 11289600 Hz and VSync to 59.764793 Hz.
- 0.180: Added audio\rax.cpp/h. Emulated the Acclaim RAX sound board, fixing sound in Batman Forever [Phil Bennett]. Worked around VDP1 timings in Sega Saturn, fixes regression with (MESS) Batman Forever gameplay speed (video\stvvdp1.cpp). Added Rotation Parameter read control register, fixes at least Riddler stage ROZ positioning in Batman Forever (video\stvvdp2.cpp) [Angelo Salese]. Changed the SH2 disassemblers to use 'std::ostream &' internally [AJR]. Changed visible area to 352x224.
- 0.214: Added machine\segabill.cpp/h, layout\segabill.lay and layout\segabillv.lay. Emulated the Sega Billboard and hook it up to the STV driver. It's not shown by default. To view it, choose the layout view 'Billboard'. YouTube: https://youtu.be/csuOJBU5rzo [biggestsonicfan, Dirk Best]. Added Z80 (8MHz) CPU5. Added dipswitches 'Test Winner LED P1/2', 'Test 7-Segment P1/2', 'Demo', 'Testmode' and 2x 'Unknown'.
Resolution, 0.106-0.128: 704x513 @ 60.000000Hz
Resolution, 0.129-0.133: 704x512 @ 60.000000Hz
Resolution, 0.134-0.142: 320x224 @ 59.828244Hz
Resolution, 0.143-0.179: 320x224 @ 59.764793Hz
Resolution, 0.180-0.193: 352x224 @ 59.764793Hz
Resolution, 0.194-0.255: 352x224 @ 59.764802Hz
TG Game Entry: https://www.twingalaxies.com/game/pe...13-v0990/mame/
Rules, Least Amount Of Strokes: https://www.twingalaxies.com/scores.php?scores=78889
Service Mode:
Standard ST-V BIOS.
Service Mode is accessed with the Service Button (F2). Navigation is with the Test (9) button and selection is with the Service Button. Each cartridge has a separate interface from the ST-V BIOS and its own navigation changes with the cart implementation: instructions on screen.
Default Settings:
Note: multiple versions fail to show the cartridge settings.
MAME 0.106:
MAME 0.250:
STV BIOS:
| 
Cartridge:
0.106-0.255: pblbeach - "Pebble Beach - The Great Shot (JUE 950913 V0.990)"
MAME History:
- 0.131u3: Added dipswitches 'UNK' and 7x 'Unknown'.
- 0.133u1: Angelo Salese added screen raw parameters hook-up to the ST-V driver, fixes some of the current issues. Angelo Salese and Corrado Tomaselli hand-tuned ST-V pixel-clock to match measured fps from the PCB. Corrado Tomaselli verified and updated the vertical syncs on the ST-V motherboard. Changed visible area to 320x224 and VSync to 59.828244Hz.
- 0.142u5: More accurate pixel clocks for Sega Saturn / ST-V [Angelo Salese]. Angelo Salese fixed an ST-V window effect bug when it's in double interlace mode, fixes a graphic bug with Virtual Mahjong. Fixed a rather silly bug with SCU DSP execute flag. Oliver Stoeneberg fixed Sega Saturn / ST-V start-up crash that was happening on some ends. Added accurate hblank durations to Sega Saturn / ST-V HW [Angelo Salese, Corrado Tomaselli, Charles MacDonald]. Angelo Salese moved SMPC intback command inside a timer, removes a kludge for SMPC mask irq. Angelo Salese fixed emulation hangs in Pebble Beach and Funky Head Boxers. Fixed a rather silly bug with SCU DSP execute flag. Moved SMPC intback command inside a timer, removes a kludge for SMPC mask irq. Added CD/DA audio and changed VSync to 59.826048 Hz.
- 0.143: Changed SH-2 CPU1/2 clock speed to 28636360 Hz, 68000 CPU3 to 11289600 Hz and VSync to 59.764793 Hz.
- 0.180: Added audio\rax.cpp/h. Emulated the Acclaim RAX sound board, fixing sound in Batman Forever [Phil Bennett]. Worked around VDP1 timings in Sega Saturn, fixes regression with (MESS) Batman Forever gameplay speed (video\stvvdp1.cpp). Added Rotation Parameter read control register, fixes at least Riddler stage ROZ positioning in Batman Forever (video\stvvdp2.cpp) [Angelo Salese]. Changed the SH2 disassemblers to use 'std::ostream &' internally [AJR]. Changed visible area to 352x224.
- 0.214: Added machine\segabill.cpp/h, layout\segabill.lay and layout\segabillv.lay. Emulated the Sega Billboard and hook it up to the STV driver. It's not shown by default. To view it, choose the layout view 'Billboard'. YouTube: https://youtu.be/csuOJBU5rzo [biggestsonicfan, Dirk Best]. Added Z80 (8MHz) CPU5. Added dipswitches 'Test Winner LED P1/2', 'Test 7-Segment P1/2', 'Demo', 'Testmode' and 2x 'Unknown'.
Resolution, 0.106-0.128: 704x513 @ 60.000000Hz
Resolution, 0.129-0.133: 704x512 @ 60.000000Hz
Resolution, 0.134-0.142: 320x224 @ 59.828244Hz
Resolution, 0.143-0.179: 320x224 @ 59.764793Hz
Resolution, 0.180-0.193: 352x224 @ 59.764793Hz
Resolution, 0.194-0.255: 352x224 @ 59.764802Hz
TG Game Entry: https://www.twingalaxies.com/game/pe...13-v0990/mame/
Rules, Least Amount Of Strokes: https://www.twingalaxies.com/scores.php?scores=78889
Service Mode:
Standard ST-V BIOS.
Service Mode is accessed with the Service Button (F2). Navigation is with the Test (9) button and selection is with the Service Button. Each cartridge has a separate interface from the ST-V BIOS and its own navigation changes with the cart implementation: instructions on screen.
Default Settings:
Note: multiple versions fail to show the cartridge settings.
MAME 0.106:
MAME 0.250:
STV BIOS:
Cartridge:
pbobbl2n
ROM set changed: no
0.106-0.250: pbobbl2n - "Puzzle Bobble 2 / Bust-A-Move Again (Neo-Geo)"
Resolution, 0.106-0.113: 320x224 @ 59.185608Hz
Resolution, 0.114-0.250: 320x224 @ 59.185606Hz
TG Game Entry: https://www.twingalaxies.com/game/pu...n-neo-geo/mame
Rules, Points [Points, Puzzle Mode]: https://www.twingalaxies.com/scores.php?scores=79000
Rules, Points [Versus Computer Mode]: https://www.twingalaxies.com/scores.php?scores=79001
NOTE: All relevant rules are covered by internal settings. If not shown during playback, use F2 to access after playback completed.
0.106-0.250: pbobbl2n - "Puzzle Bobble 2 / Bust-A-Move Again (Neo-Geo)"
Resolution, 0.106-0.113: 320x224 @ 59.185608Hz
Resolution, 0.114-0.250: 320x224 @ 59.185606Hz
TG Game Entry: https://www.twingalaxies.com/game/pu...n-neo-geo/mame
Rules, Points [Points, Puzzle Mode]: https://www.twingalaxies.com/scores.php?scores=79000
Rules, Points [Versus Computer Mode]: https://www.twingalaxies.com/scores.php?scores=79001
NOTE: All relevant rules are covered by internal settings. If not shown during playback, use F2 to access after playback completed.
pbobble2, pbobbl2o, pbobble2o
Note: two ROM sets are represented here with the changeover at 0.129.
MAME History:
- 0.113u2: Changed VSync to 58.970000 Hz.
- 0.128u4: Ross Myers added 'Puzzle Bobble 2 (Ver 2.3O 1995/07/31)'. Renamed (pbobble2) to (pbobbl2o).
- 0.133u1: Renamed (pbobbl2o) to (pbobble2o), (pbobbl2j) to (pbobble2j), (pbobbl2u) to (pbobble2u) and (pbobbl2x) to (pbobble2x).
Puzzle Bobble 2 (Ver 2.3O 1995/07/31)
---------------
ROM set changed: no but only introduced in 0.129.
0.106-0.128: NOT SUPPORTED
0.129-0.251: pbobble2 - "Puzzle Bobble 2 (Ver 2.3O 1995/07/31)"
Resolution, 0.129-0.251: 320x232 @ 58.970000Hz
TG Game: https://www.twingalaxies.com/game/pu...19950731/mame/
Points [Puzzle Game]: https://www.twingalaxies.com/scores.php?scores=239078
Puzzle Bobble 2 (Ver 2.2O 1995/07/20)
---------------
Note: not represented on TG.
ROM set changed: yes.
0.106-0.128: pbobble2 - "Puzzle Bobble 2 (Ver 2.2O 1995/07/20)"
0.129-0.133: pbobbl2o - "Puzzle Bobble 2 (Ver 2.2O 1995/07/20)"
0.134-0.251: pbobble2o - "Puzzle Bobble 2 (Ver 2.2O 1995/07/20)"
Resolution, 0.107-0.113: 320x232 @ 58.970001Hz
Resolution, 0.114-0.251: 320x232 @ 58.970000Hz
Rules: [no current tracks]
Service Mode:
Typical Taito F3 BIOS.
All relevant rules are covered by internal settings. Service Mode can be accessed using the Service button (F2). Navigate with P1 Up and Down. Select menu options with P1 Button 1. Change settings with P1 Left and Right.
Default Settings:
MAME History:
- 0.113u2: Changed VSync to 58.970000 Hz.
- 0.128u4: Ross Myers added 'Puzzle Bobble 2 (Ver 2.3O 1995/07/31)'. Renamed (pbobble2) to (pbobbl2o).
- 0.133u1: Renamed (pbobbl2o) to (pbobble2o), (pbobbl2j) to (pbobble2j), (pbobbl2u) to (pbobble2u) and (pbobbl2x) to (pbobble2x).
Puzzle Bobble 2 (Ver 2.3O 1995/07/31)
---------------
ROM set changed: no but only introduced in 0.129.
0.106-0.128: NOT SUPPORTED
0.129-0.251: pbobble2 - "Puzzle Bobble 2 (Ver 2.3O 1995/07/31)"
Resolution, 0.129-0.251: 320x232 @ 58.970000Hz
TG Game: https://www.twingalaxies.com/game/pu...19950731/mame/
Points [Puzzle Game]: https://www.twingalaxies.com/scores.php?scores=239078
Puzzle Bobble 2 (Ver 2.2O 1995/07/20)
---------------
Note: not represented on TG.
ROM set changed: yes.
0.106-0.128: pbobble2 - "Puzzle Bobble 2 (Ver 2.2O 1995/07/20)"
0.129-0.133: pbobbl2o - "Puzzle Bobble 2 (Ver 2.2O 1995/07/20)"
0.134-0.251: pbobble2o - "Puzzle Bobble 2 (Ver 2.2O 1995/07/20)"
Resolution, 0.107-0.113: 320x232 @ 58.970001Hz
Resolution, 0.114-0.251: 320x232 @ 58.970000Hz
Rules: [no current tracks]
Service Mode:
Typical Taito F3 BIOS.
All relevant rules are covered by internal settings. Service Mode can be accessed using the Service button (F2). Navigate with P1 Up and Down. Select menu options with P1 Button 1. Change settings with P1 Left and Right.
Default Settings:
pbobble3
ROM set changed: no
0.106-0.250: pbobble3 - "Puzzle Bobble 3 (Ver 2.1O 1996/09/27)"
Resolution, 0.106-0.113: 320x232 @ 58.970001Hz
Resolution, 0.114-0.250: 320x232 @ 58.970000Hz
TG Game Entry: https://www.twingalaxies.com/game/pu...96-09-27/mame/
Rules, Points [Player Versus Computer Mode]: https://www.twingalaxies.com/scores.php?scores=79004
Rules, Points [Puzzle Mode, Normal Difficulty]: https://www.twingalaxies.com/scores.php?scores=79002
Rules, Points [Puzzle Mode, Ver 2.5]: https://www.twingalaxies.com/scores.php?scores=79003
Service Mode:
Typical Taito F3 BIOS.
All relevant rules are covered by internal settings. Service Mode can be accessed using the Service button (F2). Navigate with P1 Up and Down. Select menu options with P1 Button 1. Change settings with P1 Left and Right.
Default Settings:
0.106-0.250: pbobble3 - "Puzzle Bobble 3 (Ver 2.1O 1996/09/27)"
Resolution, 0.106-0.113: 320x232 @ 58.970001Hz
Resolution, 0.114-0.250: 320x232 @ 58.970000Hz
TG Game Entry: https://www.twingalaxies.com/game/pu...96-09-27/mame/
Rules, Points [Player Versus Computer Mode]: https://www.twingalaxies.com/scores.php?scores=79004
Rules, Points [Puzzle Mode, Normal Difficulty]: https://www.twingalaxies.com/scores.php?scores=79002
Rules, Points [Puzzle Mode, Ver 2.5]: https://www.twingalaxies.com/scores.php?scores=79003
Service Mode:
Typical Taito F3 BIOS.
All relevant rules are covered by internal settings. Service Mode can be accessed using the Service button (F2). Navigate with P1 Up and Down. Select menu options with P1 Button 1. Change settings with P1 Left and Right.
Default Settings:
pbobble4
ROM set changed: no
0.106-0.250: pbobble4 - "Puzzle Bobble 4 (Ver 2.04O 1997/12/19)"
MAME History:
- 0.113u2: Changed VSync to 58.970000 Hz.
Resolution, 0.106-0.113: 320x232 @ 58.970001Hz
Resolution, 0.114-0.250: 320x232 @ 58.970000Hz
TG Game Entry: https://www.twingalaxies.com/game/pu...97-12-19/mame/
Rules, Points [Player Versus Computer Mode]: https://www.twingalaxies.com/scores.php?scores=79007
Rules, Points [Puzzle Mode, Normal Difficulty]: https://www.twingalaxies.com/scores.php?scores=79005
Rules, Points [Puzzle Mode, Super Expert Difficulty]: https://www.twingalaxies.com/scores.php?scores=79006
Service Mode:
Typical Taito F3 BIOS.
All relevant rules are covered by internal settings. Service Mode can be accessed using the Service button (F2). Navigate with P1 Up and Down. Select menu options with P1 Button 1. Change settings with P1 Left and Right.
Default Settings:
0.106-0.250: pbobble4 - "Puzzle Bobble 4 (Ver 2.04O 1997/12/19)"
MAME History:
- 0.113u2: Changed VSync to 58.970000 Hz.
Resolution, 0.106-0.113: 320x232 @ 58.970001Hz
Resolution, 0.114-0.250: 320x232 @ 58.970000Hz
TG Game Entry: https://www.twingalaxies.com/game/pu...97-12-19/mame/
Rules, Points [Player Versus Computer Mode]: https://www.twingalaxies.com/scores.php?scores=79007
Rules, Points [Puzzle Mode, Normal Difficulty]: https://www.twingalaxies.com/scores.php?scores=79005
Rules, Points [Puzzle Mode, Super Expert Difficulty]: https://www.twingalaxies.com/scores.php?scores=79006
Service Mode:
Typical Taito F3 BIOS.
All relevant rules are covered by internal settings. Service Mode can be accessed using the Service button (F2). Navigate with P1 Up and Down. Select menu options with P1 Button 1. Change settings with P1 Left and Right.
Default Settings:
pbobblen
ROM set changed: no
0.106-0.143: pbobblen - "Puzzle Bobble / Bust-A-Move (Neo-Geo) (set 1)"
0.144-0.173: pbobblen - "Puzzle Bobble / Bust-A-Move (Neo-Geo) (NGM-083)"
0.174-0.207: pbobblen - "Puzzle Bobble / Bust-A-Move (Neo-Geo, NGM-083)"
Resolution, 0.106-0.113: 320x224 @ 59.185608Hz
Resolution, 0.114-0.207: 320x224 @ 59.185606Hz
TG Game Entry: https://www.twingalaxies.com/game/pu...eo-set-1/mame/
Rules, Points [Tournament Settings]: https://www.twingalaxies.com/scores.php?scores=7794
NOTE: All relevant rules are covered by internal settings. If not shown during playback, use F2 to access after playback completed.
0.106-0.143: pbobblen - "Puzzle Bobble / Bust-A-Move (Neo-Geo) (set 1)"
0.144-0.173: pbobblen - "Puzzle Bobble / Bust-A-Move (Neo-Geo) (NGM-083)"
0.174-0.207: pbobblen - "Puzzle Bobble / Bust-A-Move (Neo-Geo, NGM-083)"
Resolution, 0.106-0.113: 320x224 @ 59.185608Hz
Resolution, 0.114-0.207: 320x224 @ 59.185606Hz
TG Game Entry: https://www.twingalaxies.com/game/pu...eo-set-1/mame/
Rules, Points [Tournament Settings]: https://www.twingalaxies.com/scores.php?scores=7794
NOTE: All relevant rules are covered by internal settings. If not shown during playback, use F2 to access after playback completed.
pcktgal
ROM set changed: no
0.75-0.179: pcktgal - "Pocket Gal (Japan)"
Resolution, 0.75-0.179: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....et+Gal+(Japan)
Rules, Four different levels are available to increase the score.: https://www.twingalaxies.com/scores.php?scores=204710
0.75-0.179: pcktgal - "Pocket Gal (Japan)"
Resolution, 0.75-0.179: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....et+Gal+(Japan)
Rules, Four different levels are available to increase the score.: https://www.twingalaxies.com/scores.php?scores=204710
pc_mario
ROM set changed: no
0.37b12-0.88: pc_mario - "PlayChoice-10: Mario Bros."
0.88u2-0.211: pc_mario - "Mario Bros. (PlayChoice-10)"
Resolution, 0.106 : 256x480 @ 60.000000Hz
Resolution, 0.107-0.211: 2 screens, both 256x240 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/ma...hoice-10/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=205776
0.37b12-0.88: pc_mario - "PlayChoice-10: Mario Bros."
0.88u2-0.211: pc_mario - "Mario Bros. (PlayChoice-10)"
Resolution, 0.106 : 256x480 @ 60.000000Hz
Resolution, 0.107-0.211: 2 screens, both 256x240 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/ma...hoice-10/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=205776
pdrift
ROM set changed: no
0.88u3-0.107: pdrift - "Power Drift (World Set 1)"
0.108: pdrift - "Power Drift (World)"
0.109-0.215: pdrift - "Power Drift (World, Rev A)"
Resolution, 0.106-0.215: 320x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/po...ld-set-1/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78957
0.88u3-0.107: pdrift - "Power Drift (World Set 1)"
0.108: pdrift - "Power Drift (World)"
0.109-0.215: pdrift - "Power Drift (World, Rev A)"
Resolution, 0.106-0.215: 320x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/po...ld-set-1/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78957
peggle
ROM set changed: no
0.106-0.209: peggle - "Peggle (Joystick, v1.0)"
Resolution, 0.106-0.209: 400x240 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/pe...tick-v10/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78890
NOTE: all settings are internal. If not shown during recording (current rules are default anyway), enter Service Mode [F2] to check. Use F2 to cycle through options, 1P to select, cursor keys to change some values.
0.106-0.209: peggle - "Peggle (Joystick, v1.0)"
Resolution, 0.106-0.209: 400x240 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/pe...tick-v10/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78890
NOTE: all settings are internal. If not shown during recording (current rules are default anyway), enter Service Mode [F2] to check. Use F2 to cycle through options, 1P to select, cursor keys to change some values.
penbros
ROM set changed: no
0.106-0.255: penbros - "Penguin Brothers (Japan)"
Resolution, 0.106-0.255: 320x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/pe...rs-japan/mame/
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78891
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78892
Service Mode:
Typical Newer Seta Hardware.
Service Mode reflects the local configuration after playback ends, not the recording. Service Mode is accessed by enabling the DIP Switch followed by a reset thus cannot be recorded in an INP. Navigation is with P1 Up and Down, selection with P1 Button 1 at the top level and instructions for sub-sections appear at the bottom of the screen.
Default Settings:
From MAME 0.250 after entering service mode:
| 
0.106-0.255: penbros - "Penguin Brothers (Japan)"
Resolution, 0.106-0.255: 320x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/pe...rs-japan/mame/
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78891
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78892
Service Mode:
Typical Newer Seta Hardware.
Service Mode reflects the local configuration after playback ends, not the recording. Service Mode is accessed by enabling the DIP Switch followed by a reset thus cannot be recorded in an INP. Navigation is with P1 Up and Down, selection with P1 Button 1 at the top level and instructions for sub-sections appear at the bottom of the screen.
Default Settings:
From MAME 0.250 after entering service mode:
pengo, pengoja
Note: two ROM sets represented here with changeover at 0.252.
MAME History:
- 0.115u4: Lord Nightmare fixed Pengo to explicitly use the SN76489 now that it behaves differently from the SN76496. Changed Z80 CPU1 clock speed to 3072000 Hz, VSync to 60.606061 Hz and palettesize to 512 colors.
- 0.222: Various documentation updates [Brian Troha]. Fixed rom names. Changed description to 'Pengo (set 1 rev C, encrypted)' and clones (set 2) to 'Pengo (set 2, encrypted)', (set 2 not encrypted) to 'Pengo (set 2, rev A, not encrypted)', (set 3 not encrypted)' to 'Pengo (set 3, not encrypted)', (set 4) to 'Pengo (set 4, encrypted)' and (set 5) to 'Pengo (set 5, encrypted)'.
- 0.222: Various documentation updates [Brian Troha]. Fixed rom names. Changed description to 'Pengo (set 1 rev C, encrypted)' and clones (set 2) to 'Pengo (set 2, encrypted)', (set 2 not encrypted) to 'Pengo (set 2, rev A, not encrypted)', (set 3 not encrypted)' to 'Pengo (set 3, not encrypted)', (set 4) to 'Pengo (set 4, encrypted)' and (set 5) to 'Pengo (set 5, encrypted)'.
- 0.252: Sorted Pengo sets and changed scheme for short names. Export versions have replaced music/faster maze drawing. Japan versions have slow maze drawing and 'popcorn' music. The unencrypted sets are the newest releases we have of both versions - for Japan that is ROMs 5120-5127 and for export that is ROMs 5128-5135 (suggesting these unencrypted versions were both released at the same time) [David Haywood]. Changed description of (set 1 rev C, encrypted) to clone 'Pengo (Japan, 315-5010 type, rev C)', clone (set 2, rev A, not encrypted) to parent 'Pengo (World, not encrypted, rev A)' and clones (set 2, encrypted) to 'Pengo (World, 315-5010 type, set 1)', (set 3, not encrypted) to 'Pengo (Japan, not encrypted)', (set 4, encrypted) to 'Pengo (World, 315-5010 type, set 3)', (set 5, encrypted) to 'Pengo (World, 315-5010 type, set 2)', (set 6, encrypted) 'Pengo (Japan, 315-5007 type, rev A)', (bootleg) to 'Pengo (Japan, bootleg)' and Penta to 'Penta (bootleg)'. Renamed (pengo) to (pengoja), (pengo2u) to (pengo), (pengo2) to (pengoa), (pengo3u) to (pengoj), (pengo4) to (pengoc), (pengo5) to (pengob), (pengob) to (pengojbl) and (pengo6) to (pengojb).
Pengo (set 1 rev c) / (set 1 rev C, encrypted) / (Japan, 315-5010 type, rev c)
-----------------
ROM set changed:yes
0.106-0.221: pengo - "Pengo (set 1 rev c)"
0.222-0.251: pengo - "Pengo (set 1 rev C, encrypted)"
0.252-0.254: pengoja - "Pengo (Japan, 315-5010 type, rev c)"
Resolution, 0.106-0.114: 288x224 @ 60.606060Hz
Resolution, 0.115-0.254: 288x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/game/pe...-1-rev-c/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=7783
Rules, Points: [Acts/Rnds 1 to 16 with 1 life only]: https://www.twingalaxies.com/scores.php?scores=244338
Pengo (World, not encrypted, rev A)
-----------------
ROM set changed: no. Added in 0.252.
0.106-0.251: NOT SUPPORTED
0.252-0.254: pengo - "Pengo (World, not encrypted, rev A)"
Resolution, 0.252-0.253: 288x224 @ 60.606061Hz
Rules: [no current tracks]
MAME History:
- 0.115u4: Lord Nightmare fixed Pengo to explicitly use the SN76489 now that it behaves differently from the SN76496. Changed Z80 CPU1 clock speed to 3072000 Hz, VSync to 60.606061 Hz and palettesize to 512 colors.
- 0.222: Various documentation updates [Brian Troha]. Fixed rom names. Changed description to 'Pengo (set 1 rev C, encrypted)' and clones (set 2) to 'Pengo (set 2, encrypted)', (set 2 not encrypted) to 'Pengo (set 2, rev A, not encrypted)', (set 3 not encrypted)' to 'Pengo (set 3, not encrypted)', (set 4) to 'Pengo (set 4, encrypted)' and (set 5) to 'Pengo (set 5, encrypted)'.
- 0.222: Various documentation updates [Brian Troha]. Fixed rom names. Changed description to 'Pengo (set 1 rev C, encrypted)' and clones (set 2) to 'Pengo (set 2, encrypted)', (set 2 not encrypted) to 'Pengo (set 2, rev A, not encrypted)', (set 3 not encrypted)' to 'Pengo (set 3, not encrypted)', (set 4) to 'Pengo (set 4, encrypted)' and (set 5) to 'Pengo (set 5, encrypted)'.
- 0.252: Sorted Pengo sets and changed scheme for short names. Export versions have replaced music/faster maze drawing. Japan versions have slow maze drawing and 'popcorn' music. The unencrypted sets are the newest releases we have of both versions - for Japan that is ROMs 5120-5127 and for export that is ROMs 5128-5135 (suggesting these unencrypted versions were both released at the same time) [David Haywood]. Changed description of (set 1 rev C, encrypted) to clone 'Pengo (Japan, 315-5010 type, rev C)', clone (set 2, rev A, not encrypted) to parent 'Pengo (World, not encrypted, rev A)' and clones (set 2, encrypted) to 'Pengo (World, 315-5010 type, set 1)', (set 3, not encrypted) to 'Pengo (Japan, not encrypted)', (set 4, encrypted) to 'Pengo (World, 315-5010 type, set 3)', (set 5, encrypted) to 'Pengo (World, 315-5010 type, set 2)', (set 6, encrypted) 'Pengo (Japan, 315-5007 type, rev A)', (bootleg) to 'Pengo (Japan, bootleg)' and Penta to 'Penta (bootleg)'. Renamed (pengo) to (pengoja), (pengo2u) to (pengo), (pengo2) to (pengoa), (pengo3u) to (pengoj), (pengo4) to (pengoc), (pengo5) to (pengob), (pengob) to (pengojbl) and (pengo6) to (pengojb).
Pengo (set 1 rev c) / (set 1 rev C, encrypted) / (Japan, 315-5010 type, rev c)
-----------------
ROM set changed:yes
0.106-0.221: pengo - "Pengo (set 1 rev c)"
0.222-0.251: pengo - "Pengo (set 1 rev C, encrypted)"
0.252-0.254: pengoja - "Pengo (Japan, 315-5010 type, rev c)"
Resolution, 0.106-0.114: 288x224 @ 60.606060Hz
Resolution, 0.115-0.254: 288x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/game/pe...-1-rev-c/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=7783
Rules, Points: [Acts/Rnds 1 to 16 with 1 life only]: https://www.twingalaxies.com/scores.php?scores=244338
Pengo (World, not encrypted, rev A)
-----------------
ROM set changed: no. Added in 0.252.
0.106-0.251: NOT SUPPORTED
0.252-0.254: pengo - "Pengo (World, not encrypted, rev A)"
Resolution, 0.252-0.253: 288x224 @ 60.606061Hz
Rules: [no current tracks]
pepper2
ROM set changed: no
0.106-0.144: pepper2 - "Pepper II"
0.145-0.201: pepper2 - "Pepper II (version 8)"
Resolution, 0.106-0.113: 248x256 @ 57.000000Hz
Resolution, 0.114-0.201: 256x256 @ 59.996811Hz
TG Game Entry: https://www.twingalaxies.com/pepper-ii/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=7784
0.106-0.144: pepper2 - "Pepper II"
0.145-0.201: pepper2 - "Pepper II (version 8)"
Resolution, 0.106-0.113: 248x256 @ 57.000000Hz
Resolution, 0.114-0.201: 256x256 @ 59.996811Hz
TG Game Entry: https://www.twingalaxies.com/pepper-ii/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=7784
percuss
ROM set changed: no
0.106-0.260: percuss - "The Percussor"
MAME History:
- 0.148u4: hap changed Z80 CPU1/2 clock speeds to 3072000 Hz, AY-3-8910A to 1536000 Hz and VSync to 60.606061 Hz. This fixes the Z80 and AY8910 speeds are unverified source bug.
- 0.148u5: Changed description to 'The Percussor'.
Resolution, 0.106-0.148: 256x224 @ 60.000000Hz
Resolution, 0.149-0.260: 256x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/game/the-percussor/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=10482
Service Mode:
Typical Orca Zodiack/Dogfight hardware.
No service mode found. - Barthax, Dec 2023.
Default Settings:
MAME 0.106:
MAME 0.250:
0.106-0.260: percuss - "The Percussor"
MAME History:
- 0.148u4: hap changed Z80 CPU1/2 clock speeds to 3072000 Hz, AY-3-8910A to 1536000 Hz and VSync to 60.606061 Hz. This fixes the Z80 and AY8910 speeds are unverified source bug.
- 0.148u5: Changed description to 'The Percussor'.
Resolution, 0.106-0.148: 256x224 @ 60.000000Hz
Resolution, 0.149-0.260: 256x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/game/the-percussor/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=10482
Service Mode:
Typical Orca Zodiack/Dogfight hardware.
No service mode found. - Barthax, Dec 2023.
Default Settings:
MAME 0.106:
MAME 0.250:
perfrman
ROM set changed: no
0.106-0.204: perfrman - "Performan (Japan)"
Resolution, 0.106-0.204: 256x240 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/performan-japan/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=16297
0.106-0.204: perfrman - "Performan (Japan)"
Resolution, 0.106-0.204: 256x240 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/performan-japan/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=16297
peterpak
ROM set changed: no
0.106-0.175: peterpak - "Peter Pack-Rat"
0.180- : peterpak - "Peter Pack Rat" (description change only)
MAME History:
- 0.180: AntoPISA changed description to 'Peter Pack Rat'.
Resolution, 0.106-0.114: 336x240 @ 60.000000Hz
Resolution, 0.115-0.180: 336x240 @ 59.922743Hz
TG Game Entry: https://www.twingalaxies.com/scores....=Peter+Packrat
Rules, Points: https://www.twingalaxies.com/scores.php?scores=30865
0.106-0.175: peterpak - "Peter Pack-Rat"
0.180- : peterpak - "Peter Pack Rat" (description change only)
MAME History:
- 0.180: AntoPISA changed description to 'Peter Pack Rat'.
Resolution, 0.106-0.114: 336x240 @ 60.000000Hz
Resolution, 0.115-0.180: 336x240 @ 59.922743Hz
TG Game Entry: https://www.twingalaxies.com/scores....=Peter+Packrat
Rules, Points: https://www.twingalaxies.com/scores.php?scores=30865
pettanp
ROM set changed: no
0.106-0.175: pettanp - "Pettan Pyuu (Japan)"
Resolution, 0.106-0.175: 240x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....ttan%20Pyuu%20[Japan]
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78895
0.106-0.175: pettanp - "Pettan Pyuu (Japan)"
Resolution, 0.106-0.175: 240x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....ttan%20Pyuu%20[Japan]
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78895
pgoal
ROM set changed: no
0.106-0.143: pgoal - "Pleasure Goal / Futsal - 5 on 5 Mini Soccer"
0.144-0.260: pgoal - "Pleasure Goal / Futsal - 5 on 5 Mini Soccer (NGM-219)"
MAME History:
- 0.113u2: Zsolt Vasvari updated NeoGeo driver to the new video timing code and screen raw parameters, this fixes also the messed up graphics. Changed VSync to 59.185606 Hz.
- 0.129u3: Fabio Priuli added missing HARDDIP settings in 'STANDARD_DIPS' for DIP's 4,5 and 6 ("COMM Setting"). Added dipswitches 'COMM Setting (Cabinet No.)' and 'COMM Setting (Link Enable)'.
- 0.143u5: Johnboy correct layout of 'Pleasure Goal' according to original cart. Changed description to 'Pleasure Goal / Futsal - 5 on 5 Mini Soccer (NGM-219)'.
- 0.150: Endian fix for kof2003 protection (machine\neocrypt.c and neoprot.c). Fixed NeoGeo memory leak, clean up inputs a bit [Alex Jackson]. Changed 'Test Switch' dipswitch to 'Service Mode'.
- 0.151: [- snip -] [Alex Jackson]. Added coin slots 3 and 4. Added dipswitches 'Setting Mode', 'Cabinet' and 'Controller'.
Resolution, 0.106-0.113: 320x224 @ 59.185608Hz
Resolution, 0.114-0.260: 320x224 @ 59.185606Hz
TG Game Entry: https://www.twingalaxies.com/game/pl...i-soccer/mame/
Rules, Biggest Blowout: https://www.twingalaxies.com/scores.php?scores=78915
Service Mode:
Standard SNK NeoGeo BIOS.
All relevant rules are covered by internal settings. If not shown during playback, use F2 to access after playback completed. Navigation is with P1 Up & Down. Select menu option with P1 Button 1 and sub-menus can be exited with P1 Button 3. P1 Button 1 and P1 Button 2 adjust individual configuration options.
Default Settings:
MAME 0.106 DIP Switches:
MAME 0.130 DIP Switches:
MAME 0.150 DIP Switches:
MAME 0.151 DIP Switches:
MAME 0.250 DIP Switches:
| 
MAME 0.250 BIOS:
Cartridge:
| 
0.106-0.143: pgoal - "Pleasure Goal / Futsal - 5 on 5 Mini Soccer"
0.144-0.260: pgoal - "Pleasure Goal / Futsal - 5 on 5 Mini Soccer (NGM-219)"
MAME History:
- 0.113u2: Zsolt Vasvari updated NeoGeo driver to the new video timing code and screen raw parameters, this fixes also the messed up graphics. Changed VSync to 59.185606 Hz.
- 0.129u3: Fabio Priuli added missing HARDDIP settings in 'STANDARD_DIPS' for DIP's 4,5 and 6 ("COMM Setting"). Added dipswitches 'COMM Setting (Cabinet No.)' and 'COMM Setting (Link Enable)'.
- 0.143u5: Johnboy correct layout of 'Pleasure Goal' according to original cart. Changed description to 'Pleasure Goal / Futsal - 5 on 5 Mini Soccer (NGM-219)'.
- 0.150: Endian fix for kof2003 protection (machine\neocrypt.c and neoprot.c). Fixed NeoGeo memory leak, clean up inputs a bit [Alex Jackson]. Changed 'Test Switch' dipswitch to 'Service Mode'.
- 0.151: [- snip -] [Alex Jackson]. Added coin slots 3 and 4. Added dipswitches 'Setting Mode', 'Cabinet' and 'Controller'.
Resolution, 0.106-0.113: 320x224 @ 59.185608Hz
Resolution, 0.114-0.260: 320x224 @ 59.185606Hz
TG Game Entry: https://www.twingalaxies.com/game/pl...i-soccer/mame/
Rules, Biggest Blowout: https://www.twingalaxies.com/scores.php?scores=78915
Service Mode:
Standard SNK NeoGeo BIOS.
All relevant rules are covered by internal settings. If not shown during playback, use F2 to access after playback completed. Navigation is with P1 Up & Down. Select menu option with P1 Button 1 and sub-menus can be exited with P1 Button 3. P1 Button 1 and P1 Button 2 adjust individual configuration options.
Default Settings:
MAME 0.106 DIP Switches:
MAME 0.130 DIP Switches:
MAME 0.150 DIP Switches:
MAME 0.151 DIP Switches:
MAME 0.250 DIP Switches:
MAME 0.250 BIOS:
Cartridge:
phantom2
ROM set changed: no
0.106-0.175: phantom2 - "Phantom II"
Resolution, 0.106-0.111: 240x224 @ 60.000000Hz
Resolution, 0.112-0.175: 260x224 @ 59.541985Hz
TG Game Entry: https://www.twingalaxies.com/scores....e=Phantom%20II
Rules, Points: https://www.twingalaxies.com/scores.php?scores=10053
0.106-0.175: phantom2 - "Phantom II"
Resolution, 0.106-0.111: 240x224 @ 60.000000Hz
Resolution, 0.112-0.175: 260x224 @ 59.541985Hz
TG Game Entry: https://www.twingalaxies.com/scores....e=Phantom%20II
Rules, Points: https://www.twingalaxies.com/scores.php?scores=10053
pheliosj, phelios
Note: two ROM sets represented here with changeover at 0.161.
MAME History:
- 0.113u2: Changed VSync to 60.606061 Hz.
- 0.161: Stefano Rolleri added Phelios. Note: New World set, story line in English. Renamed (phelios) to (pheliosj).
Phelios (Japan)
---------------
ROM set changed: yes
0.106-0.160: phelios - "Phelios (Japan)"
0.161-0.250: pheliosj - "Phelios (Japan)"
Resolution, 0.106-0.113: 288x224 @ 60.606060Hz
Resolution, 0.114-0.204: 288x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/game/phelios-japan/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=23031
Phelios
-------
Note: not currently represented at TG.
ROM set changed: no. Added in 0.161.
0.161-0.250: phelios - "Phelios"
Resolution, 0.161-0.204: 288x224 @ 60.606061Hz
Rules: [no current tracks]
Service Mode:
Typical Namco NS-2 BIOS.
There are both hardware DIP switches & internal settings. Hardware DIP switches will reflect local configuration after playback, not the recording. Other relevant rules are covered by internal settings. If not shown during playback, use Service Mode to access after playback completed. Service Mode is accessed via the DIP Switch which is toggled with the Service button (F2). A series of screens can be transitioned with the Test (9) button. The Game Options screen can be interacted with using P1 Up and P1 Down for navigation and P1 Left and Right to change values.
Default Setting:
Phelis (Japanese storyline):
| Phelios (English storyline): 
From MAME 0.250 after enabling the DIP switch:
MAME History:
- 0.113u2: Changed VSync to 60.606061 Hz.
- 0.161: Stefano Rolleri added Phelios. Note: New World set, story line in English. Renamed (phelios) to (pheliosj).
Phelios (Japan)
---------------
ROM set changed: yes
0.106-0.160: phelios - "Phelios (Japan)"
0.161-0.250: pheliosj - "Phelios (Japan)"
Resolution, 0.106-0.113: 288x224 @ 60.606060Hz
Resolution, 0.114-0.204: 288x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/game/phelios-japan/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=23031
Phelios
-------
Note: not currently represented at TG.
ROM set changed: no. Added in 0.161.
0.161-0.250: phelios - "Phelios"
Resolution, 0.161-0.204: 288x224 @ 60.606061Hz
Rules: [no current tracks]
Service Mode:
Typical Namco NS-2 BIOS.
There are both hardware DIP switches & internal settings. Hardware DIP switches will reflect local configuration after playback, not the recording. Other relevant rules are covered by internal settings. If not shown during playback, use Service Mode to access after playback completed. Service Mode is accessed via the DIP Switch which is toggled with the Service button (F2). A series of screens can be transitioned with the Test (9) button. The Game Options screen can be interacted with using P1 Up and P1 Down for navigation and P1 Left and Right to change values.
Default Setting:
Phelis (Japanese storyline):
From MAME 0.250 after enabling the DIP switch:
phoenix
ROM set changed: no
0.106-0.177: phoenix - "Phoenix (Amstar)"
0.178-0.250: phoenix - "Phoenix (Amstar, set 1)"
MAME History:
- 0.178: MASH added clone Phoenix (Amstar, set 2). f205v added clone Condor (S C Novar bootleg of Phoenix). Changed parent description to 'Phoenix (Amstar, set 1)' and clone 'Condor (bootleg of Phoenix)' to 'Condor (Sidam bootleg of Phoenix)'.
Resolution, 0.106-0.122: 248x208 @ 60.000000Hz
Resolution, 0.123-0.250: 256x208 @ 61.035156Hz
TG Game Entry: https://www.twingalaxies.com/game/phoenix-amstar/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=7785
Service Mode:
No service mode.
0.106-0.177: phoenix - "Phoenix (Amstar)"
0.178-0.250: phoenix - "Phoenix (Amstar, set 1)"
MAME History:
- 0.178: MASH added clone Phoenix (Amstar, set 2). f205v added clone Condor (S C Novar bootleg of Phoenix). Changed parent description to 'Phoenix (Amstar, set 1)' and clone 'Condor (bootleg of Phoenix)' to 'Condor (Sidam bootleg of Phoenix)'.
Resolution, 0.106-0.122: 248x208 @ 60.000000Hz
Resolution, 0.123-0.250: 256x208 @ 61.035156Hz
TG Game Entry: https://www.twingalaxies.com/game/phoenix-amstar/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=7785
Service Mode:
No service mode.
photoy2k104, photoy2k
Note: two ROM sets represented here with changeover at 0.138.
MAME History:
- 0.138: XingXing added Photo Y2K (ver. 105). Renamed (photoy2k) to (photoy2k104).
- 0.145u6: Changed VSync to 59.17 Hz.
- 0.198: Changed description to 'Photo Y2K / Chaoji Bi Yi Bi / Dajia Lai Zhao Cha / Real and Fake (ver. 105)' and clones (ver. 102, Japanese Board) to 'Photo Y2K / Chaoji Bi Yi Bi / Dajia Lai Zhao Cha / Real and Fake (ver. 102, Japanese Board)' and (ver. 104) to 'Photo Y2K / Chaoji Bi Yi Bi / Dajia Lai Zhao Cha / Real and Fake (ver. 104)'.
- 0.212: Changed VSync to 60Hz.
- 0.223: Simulated 'Photo Y2K 2' sprite offset decode (machine\pgmprot_igs027a_type1.cpp) and promoted game to working [iq_132, dink]. Support for V3021 RTC serial interface. Implemented RAM and address commands. Use device_rtc_interface for RTC handling (machine\v3021.cpp). Use struct for sprites and raw parameters for screen. Fixed timing of intro sequences in some games. Use generic gfx layout for foreground. Moved VBlank IRQ into screen_vblank. Reduced duplicates. Added notes [cam900]. Changed VSync to 59.185606 Hz.
Photo Y2K (ver. 104)
--------------------
ROM set changed: yes
0.106-0.130: photoy2k - "Photo Y2K"
0.131-0.137: photoy2k - "Photo Y2K (ver. 104)"
0.138-0.197: photoy2k104 - "Photo Y2K (ver. 104)"
0.198-0.255: photoy2k104 - "Photo Y2K / Chaoji Bi Yi Bi / Dajia Lai Zhao Cha / Real and Fake (ver. 104)"
Resolution, 0.106-0.145: 448x224 @ 60.000000Hz
Resolution, 0.146-0.211: 448x224 @ 59.170000Hz
Resolution, 0.212-0.222: 448x224 @ 60.000000Hz
Resolution, 0.223-0.255: 448x224 @ 59.185606Hz
TG Game Entry: https://www.twingalaxies.com/game/photo-y2k/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78896
Photo Y2K / Chaoji Bi Yi Bi / Dajia Lai Zhao Cha / Real and Fake (ver. 105)
--------------------
Note: not currently represented on TG.
ROM set changed: no. Added in 0.138.
0.138-0.197: photoy2k - "Photo Y2K (ver. 105)"
0.198-0.255: photoy2k - "Photo Y2K / Chaoji Bi Yi Bi / Dajia Lai Zhao Cha / Real and Fake (ver. 105)"
Resolution, 0.138-0.145: 448x224 @ 60.000000Hz
Resolution, 0.146-0.211: 448x224 @ 59.170000Hz
Resolution, 0.212-0.222: 448x224 @ 60.000000Hz
Resolution, 0.223-0.255: 448x224 @ 59.185606Hz
Rules: [no current tracks]
Service Mode:
Typical IGS PolyGame Master BIOS.
There are both hardware DIP switches & internal settings. Hardware DIP switches and internal settings will reflect local configuration after playback, not the recording. Service Mode is accessed via the DIP Switch which is toggled with the Service button (F2) and requires a reset thus cannot be recorded in an INP. Navigation is with P1 Up and Down, selection with P1 Button 1.
Default Settings:
| 
| 
| 
MAME History:
- 0.138: XingXing added Photo Y2K (ver. 105). Renamed (photoy2k) to (photoy2k104).
- 0.145u6: Changed VSync to 59.17 Hz.
- 0.198: Changed description to 'Photo Y2K / Chaoji Bi Yi Bi / Dajia Lai Zhao Cha / Real and Fake (ver. 105)' and clones (ver. 102, Japanese Board) to 'Photo Y2K / Chaoji Bi Yi Bi / Dajia Lai Zhao Cha / Real and Fake (ver. 102, Japanese Board)' and (ver. 104) to 'Photo Y2K / Chaoji Bi Yi Bi / Dajia Lai Zhao Cha / Real and Fake (ver. 104)'.
- 0.212: Changed VSync to 60Hz.
- 0.223: Simulated 'Photo Y2K 2' sprite offset decode (machine\pgmprot_igs027a_type1.cpp) and promoted game to working [iq_132, dink]. Support for V3021 RTC serial interface. Implemented RAM and address commands. Use device_rtc_interface for RTC handling (machine\v3021.cpp). Use struct for sprites and raw parameters for screen. Fixed timing of intro sequences in some games. Use generic gfx layout for foreground. Moved VBlank IRQ into screen_vblank. Reduced duplicates. Added notes [cam900]. Changed VSync to 59.185606 Hz.
Photo Y2K (ver. 104)
--------------------
ROM set changed: yes
0.106-0.130: photoy2k - "Photo Y2K"
0.131-0.137: photoy2k - "Photo Y2K (ver. 104)"
0.138-0.197: photoy2k104 - "Photo Y2K (ver. 104)"
0.198-0.255: photoy2k104 - "Photo Y2K / Chaoji Bi Yi Bi / Dajia Lai Zhao Cha / Real and Fake (ver. 104)"
Resolution, 0.106-0.145: 448x224 @ 60.000000Hz
Resolution, 0.146-0.211: 448x224 @ 59.170000Hz
Resolution, 0.212-0.222: 448x224 @ 60.000000Hz
Resolution, 0.223-0.255: 448x224 @ 59.185606Hz
TG Game Entry: https://www.twingalaxies.com/game/photo-y2k/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78896
Photo Y2K / Chaoji Bi Yi Bi / Dajia Lai Zhao Cha / Real and Fake (ver. 105)
--------------------
Note: not currently represented on TG.
ROM set changed: no. Added in 0.138.
0.138-0.197: photoy2k - "Photo Y2K (ver. 105)"
0.198-0.255: photoy2k - "Photo Y2K / Chaoji Bi Yi Bi / Dajia Lai Zhao Cha / Real and Fake (ver. 105)"
Resolution, 0.138-0.145: 448x224 @ 60.000000Hz
Resolution, 0.146-0.211: 448x224 @ 59.170000Hz
Resolution, 0.212-0.222: 448x224 @ 60.000000Hz
Resolution, 0.223-0.255: 448x224 @ 59.185606Hz
Rules: [no current tracks]
Service Mode:
Typical IGS PolyGame Master BIOS.
There are both hardware DIP switches & internal settings. Hardware DIP switches and internal settings will reflect local configuration after playback, not the recording. Service Mode is accessed via the DIP Switch which is toggled with the Service button (F2) and requires a reset thus cannot be recorded in an INP. Navigation is with P1 Up and Down, selection with P1 Button 1.
Default Settings:
phozon
ROM set changed: no
0.106-0.196: phozon - "Phozon (Japan)"
MAME History:
- 0.115u4: Aaron Giles removed colortables from a number of drivers that didn't need them. Also converted pacman and mappy drivers to collapse the colortable and palette. Changed VSync to 60.606061 Hz and palettesize to 512 colors.
Resolution, 0.106-0.115: 288x224 @ 60.606060Hz
Resolution, 0.116-0.196: 288x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/game/phozon-japan/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=7786
Service Mode:
Typical "Mappy" BIOS.
Service Mode reflects the local configuration after playback ends, not the recording. Service Mode is accessed by enabling the Service Mode DIP switch. The Service Mode button (F2) can be used to perform a restart while recording and thus DIP switches can be changed during recording coupled with a Service Mode button use. Any changes to the DIP settings after the display in the boot sequence will not take effect until the next Service Mode restart. DIPs are shown by the game (very briefly) during boot up (starting around frame 635 in the first boot).
NOTE: Since 0.173, the conditional DIPs feature of this game affects WolfMAME's inpview. Verify settings with caution! ["Lives" affects "Bonus_Life"]
0.106-0.196: phozon - "Phozon (Japan)"
MAME History:
- 0.115u4: Aaron Giles removed colortables from a number of drivers that didn't need them. Also converted pacman and mappy drivers to collapse the colortable and palette. Changed VSync to 60.606061 Hz and palettesize to 512 colors.
Resolution, 0.106-0.115: 288x224 @ 60.606060Hz
Resolution, 0.116-0.196: 288x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/game/phozon-japan/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=7786
Service Mode:
Typical "Mappy" BIOS.
Service Mode reflects the local configuration after playback ends, not the recording. Service Mode is accessed by enabling the Service Mode DIP switch. The Service Mode button (F2) can be used to perform a restart while recording and thus DIP switches can be changed during recording coupled with a Service Mode button use. Any changes to the DIP settings after the display in the boot sequence will not take effect until the next Service Mode restart. DIPs are shown by the game (very briefly) during boot up (starting around frame 635 in the first boot).
NOTE: Since 0.173, the conditional DIPs feature of this game affects WolfMAME's inpview. Verify settings with caution! ["Lives" affects "Bonus_Life"]
pickin
ROM set changed: no
0.106-0.210: pickin - "Pickin'"
Resolution, 0.106-0.138: 256x224 @ 60.000000Hz
Resolution, 0.139-0.210: 256x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/game/pickin/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78897
0.106-0.210: pickin - "Pickin'"
Resolution, 0.106-0.138: 256x224 @ 60.000000Hz
Resolution, 0.139-0.210: 256x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/game/pickin/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78897
pignewt
ROM set changed: no
0.106-0.197: pignewt - "Pig Newton (version C)"
Resolution, 0.106-0.107: 256x224 @ 60.000000Hz
Resolution, 0.108-0.113: 256x224 @ 59.998135Hz
Resolution, 0.114-0.196: 256x224 @ 59.998138Hz
Resolution, 0.197- : 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/pi...ersion-c/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78898
NOTE: The "Unknown" DIPs were renamed to "Unused" in version 0.122u8, and the defaults were changed from "On" to "Off".
0.106-0.197: pignewt - "Pig Newton (version C)"
Resolution, 0.106-0.107: 256x224 @ 60.000000Hz
Resolution, 0.108-0.113: 256x224 @ 59.998135Hz
Resolution, 0.114-0.196: 256x224 @ 59.998138Hz
Resolution, 0.197- : 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/pi...ersion-c/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78898
NOTE: The "Unknown" DIPs were renamed to "Unused" in version 0.122u8, and the defaults were changed from "On" to "Off".
pigout
ROM set changed: no
0.106-0.122: pigout - "Pigout"
0.123-0.195: pigout - "Pig Out: Dine Like a Swine! (set 1)"
0.196-0.250: pigout - "Pig Out: Dine Like a Swine! (rev 2?)"
MAME History:
- 0.122u8: Changed description to 'Pig Out: Dine Like a Swine! (set 1)' and clone (alternate) to 'Pig Out: Dine Like a Swine! (set 2)'.
- 0.196: Kevin Eshbach and The Dumping Union fixed rom labels and documented undumped PALs for Pig Out. Changed description to 'Pig Out: Dine Like a Swine! (rev 2?)' and clone (set 2) to 'Pig Out: Dine Like a Swine! (rev 1)'.
Resolution, 0.106-0.250: 320x240 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/pigout/mame/
Rules, Calories [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=30942
Rules, Calories [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=30943
Rules, Calories [Three Player Team]: https://www.twingalaxies.com/scores.php?scores=30944
Service Mode:
Typical Cinematronics Leland BIOS.
All relevant rules are covered by internal settings. If not shown during playback, use Service Mode to access after playback completed. Service Mode is accessed by holding P1 Start button and then using the Service Mode button (F2) - release both once activated. Navigation is performed with P1 Button 1. Selection is performed with P1 Button 2. Instructions are given on screen.
Default settings:
0.106-0.122: pigout - "Pigout"
0.123-0.195: pigout - "Pig Out: Dine Like a Swine! (set 1)"
0.196-0.250: pigout - "Pig Out: Dine Like a Swine! (rev 2?)"
MAME History:
- 0.122u8: Changed description to 'Pig Out: Dine Like a Swine! (set 1)' and clone (alternate) to 'Pig Out: Dine Like a Swine! (set 2)'.
- 0.196: Kevin Eshbach and The Dumping Union fixed rom labels and documented undumped PALs for Pig Out. Changed description to 'Pig Out: Dine Like a Swine! (rev 2?)' and clone (set 2) to 'Pig Out: Dine Like a Swine! (rev 1)'.
Resolution, 0.106-0.250: 320x240 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/pigout/mame/
Rules, Calories [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=30942
Rules, Calories [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=30943
Rules, Calories [Three Player Team]: https://www.twingalaxies.com/scores.php?scores=30944
Service Mode:
Typical Cinematronics Leland BIOS.
All relevant rules are covered by internal settings. If not shown during playback, use Service Mode to access after playback completed. Service Mode is accessed by holding P1 Start button and then using the Service Mode button (F2) - release both once activated. Navigation is performed with P1 Button 1. Selection is performed with P1 Button 2. Instructions are given on screen.
Default settings:
pigskin
ROM set changed: no
0.106-0.141: pigskin - "Pigskin 621AD"
0.142-0.175: pigskin - "Pigskin 621AD (rev 1.1K 8/01/90)"
Resolution, 0.106-0.175: 512x480 @ 30.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....mename=Pigskin 621AD
Rules, Biggest Blowout: https://www.twingalaxies.com/scores.php?scores=78899
0.106-0.141: pigskin - "Pigskin 621AD"
0.142-0.175: pigskin - "Pigskin 621AD (rev 1.1K 8/01/90)"
Resolution, 0.106-0.175: 512x480 @ 30.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....mename=Pigskin 621AD
Rules, Biggest Blowout: https://www.twingalaxies.com/scores.php?scores=78899
pinbo
ROM set changed: no
0.106-0.175: pinbo - "Pinbo (set 1)"
Resolution, 0.106-0.122: 256x224 @ 60.000000Hz
Resolution, 0.123-0.175: 256x224 @ 57.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....ename=Pinbo%20[set%201]
Rules, Points: https://www.twingalaxies.com/scores.php?scores=14490
0.106-0.175: pinbo - "Pinbo (set 1)"
Resolution, 0.106-0.122: 256x224 @ 60.000000Hz
Resolution, 0.123-0.175: 256x224 @ 57.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....ename=Pinbo%20[set%201]
Rules, Points: https://www.twingalaxies.com/scores.php?scores=14490
pingpong
ROM set changed: no
0.106-0.123: pingpong - "Ping Pong"
0.124-0.210: pingpong - "Konami's Ping-Pong"
Resolution, 0.106-0.210: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/ko...ing-pong/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=223013
0.106-0.123: pingpong - "Ping Pong"
0.124-0.210: pingpong - "Konami's Ping-Pong"
Resolution, 0.106-0.210: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/ko...ing-pong/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=223013
pinkswts
Future note: if there are multiple versions with the same date, see cv1k.cpp introduction as potential explanation.
ROM set changed: no. Added in 0.153
0.153-0.215: pinkswts - "Pink Sweets: Ibara Sorekara (2006/04/06 MASTER VER....)"
Resolution, 0.153-0.215: 320x240 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/pi...sorekara/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=205229
Rules, Points - Score Attack: https://www.twingalaxies.com/scores.php?scores=205230
Rules, Points - Harder: https://www.twingalaxies.com/scores.php?scores=205231
NOTE: All relevant rules are covered by internal settings. If not shown during playback, use F2 to access after playback completed.
ROM set changed: no. Added in 0.153
0.153-0.215: pinkswts - "Pink Sweets: Ibara Sorekara (2006/04/06 MASTER VER....)"
Resolution, 0.153-0.215: 320x240 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/pi...sorekara/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=205229
Rules, Points - Score Attack: https://www.twingalaxies.com/scores.php?scores=205230
Rules, Points - Harder: https://www.twingalaxies.com/scores.php?scores=205231
NOTE: All relevant rules are covered by internal settings. If not shown during playback, use F2 to access after playback completed.
pipedrm
Note: two ROM sets represented here with changeover at 0.129u5.
MAME History:
- 0.129u5: Corrado Tomaselli added Pipe Dream (World). Renamed (pipedrm) to (pipedrmu).
Pipe Dream (US)
---------------
ROM set changed: yes
0.106-0.129: pipedrm - "Pipe Dream (US)"
0.129u5-0.175: pipedrmu - "Pipe Dream (US)"
Resolution, 0.106-0.175: 352x240 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....ipe%20Dream%20[US]
Rules, Points [Course A]: https://www.twingalaxies.com/scores.php?scores=78901
Rules, Points [Course B]: https://www.twingalaxies.com/scores.php?scores=78902
Rules, Points [Course C]: https://www.twingalaxies.com/scores.php?scores=78903
Pipe Dream (World)
------------------
Note: not currently represented on TG.
ROM set changed: no. Added in 0.129u5.
0.129u5-0.176: pipedrm - "Pipe Dream (World)"
Resolution, 0.130-0.176: 352x240 @ 60.000000Hz
Rules: [no current tracks]
MAME History:
- 0.129u5: Corrado Tomaselli added Pipe Dream (World). Renamed (pipedrm) to (pipedrmu).
Pipe Dream (US)
---------------
ROM set changed: yes
0.106-0.129: pipedrm - "Pipe Dream (US)"
0.129u5-0.175: pipedrmu - "Pipe Dream (US)"
Resolution, 0.106-0.175: 352x240 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....ipe%20Dream%20[US]
Rules, Points [Course A]: https://www.twingalaxies.com/scores.php?scores=78901
Rules, Points [Course B]: https://www.twingalaxies.com/scores.php?scores=78902
Rules, Points [Course C]: https://www.twingalaxies.com/scores.php?scores=78903
Pipe Dream (World)
------------------
Note: not currently represented on TG.
ROM set changed: no. Added in 0.129u5.
0.129u5-0.176: pipedrm - "Pipe Dream (World)"
Resolution, 0.130-0.176: 352x240 @ 60.000000Hz
Rules: [no current tracks]
pipedrmu
ROM set changed: yes
0.106-0.129: pipedrm - "Pipe Dream (US)"
0.129u5-0.175: pipedrmu - "Pipe Dream (US)"
MAME History:
- 0.129u5: Corrado Tomaselli added Pipe Dream (World). Renamed (pipedrm) to (pipedrmu).
Resolution, 0.106-0.175: 352x240 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....ipe%20Dream%20[US]
Rules, Points [Course A]: https://www.twingalaxies.com/scores.php?scores=78901
Rules, Points [Course B]: https://www.twingalaxies.com/scores.php?scores=78902
Rules, Points [Course C]: https://www.twingalaxies.com/scores.php?scores=78903
0.106-0.129: pipedrm - "Pipe Dream (US)"
0.129u5-0.175: pipedrmu - "Pipe Dream (US)"
MAME History:
- 0.129u5: Corrado Tomaselli added Pipe Dream (World). Renamed (pipedrm) to (pipedrmu).
Resolution, 0.106-0.175: 352x240 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....ipe%20Dream%20[US]
Rules, Points [Course A]: https://www.twingalaxies.com/scores.php?scores=78901
Rules, Points [Course B]: https://www.twingalaxies.com/scores.php?scores=78902
Rules, Points [Course C]: https://www.twingalaxies.com/scores.php?scores=78903
pipeline
ROM set changed: no
0.106-0.175: pipeline - "Pipeline"
Resolution, 0.106-0.175: 320x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....ename=Pipeline
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78904
0.106-0.175: pipeline - "Pipeline"
Resolution, 0.106-0.175: 320x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....ename=Pipeline
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78904
pipibibs
ROM set changed: no
0.106-0.122: pipibibs - "Pipi & Bibis / Whoopee!!"
0.123-0.135: pipibibs - "Pipi & Bibis / Whoopee!! (Z80 sound cpu)"
0.136-0.255: pipibibs - "Pipi & Bibis / Whoopee!! (Z80 sound cpu, set 1)"
MAME History:
- 0.122u5: Corrado Tomaselli verified/correct frequencies on Pipi & Bibis PCB. Changed description to 'Pipi & Bibis / Whoopee!! (Z80 sound cpu)'.
- 0.152: Merged othldrby.c with toaplan2.c driver. Added machine\upd4992.c/h. Converted Toaplan 2 to use SCREEN_RAW_PARAMS. Added a core for uPD4992 RTC, used by Othello Derby and Power Kick [Angelo Salese]. Fixed compile, also slightly cleanup/reorganize toaplan2.h [Alex Jackson]. Changed VSync to 59.637405 Hz.
Resolution, 0.106-0.151: 320x240 @ 60.000000Hz
Resolution, 0.152-0.255: 320x240 @ 59.637405Hz
TG Game Entry: https://www.twingalaxies.com/game/pi...-whoopee/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=9830
Rules, Points[Two Player Team]: https://www.twingalaxies.com/scores.php?scores=249008
Service Mode:
Typical Toaplan 2 BIOS.
Service Mode reflects the local configuration after playback ends, not the recording. Service Mode is accessed by enabling the DIP Switch which can be toggled with the Service Mode Button (F2). Navigation is with P1 Up and P1 Down, selection with P1 Button 1. Sub-menus have additional instructions.
Default Settings:
NOTE: Difficulty & Timer settings Medium were both renamed to Normal in 0.141u4.
| 
From MAME 0.250 after entering service mode:
| 
0.106-0.122: pipibibs - "Pipi & Bibis / Whoopee!!"
0.123-0.135: pipibibs - "Pipi & Bibis / Whoopee!! (Z80 sound cpu)"
0.136-0.255: pipibibs - "Pipi & Bibis / Whoopee!! (Z80 sound cpu, set 1)"
MAME History:
- 0.122u5: Corrado Tomaselli verified/correct frequencies on Pipi & Bibis PCB. Changed description to 'Pipi & Bibis / Whoopee!! (Z80 sound cpu)'.
- 0.152: Merged othldrby.c with toaplan2.c driver. Added machine\upd4992.c/h. Converted Toaplan 2 to use SCREEN_RAW_PARAMS. Added a core for uPD4992 RTC, used by Othello Derby and Power Kick [Angelo Salese]. Fixed compile, also slightly cleanup/reorganize toaplan2.h [Alex Jackson]. Changed VSync to 59.637405 Hz.
Resolution, 0.106-0.151: 320x240 @ 60.000000Hz
Resolution, 0.152-0.255: 320x240 @ 59.637405Hz
TG Game Entry: https://www.twingalaxies.com/game/pi...-whoopee/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=9830
Rules, Points[Two Player Team]: https://www.twingalaxies.com/scores.php?scores=249008
Service Mode:
Typical Toaplan 2 BIOS.
Service Mode reflects the local configuration after playback ends, not the recording. Service Mode is accessed by enabling the DIP Switch which can be toggled with the Service Mode Button (F2). Navigation is with P1 Up and P1 Down, selection with P1 Button 1. Sub-menus have additional instructions.
Default Settings:
NOTE: Difficulty & Timer settings Medium were both renamed to Normal in 0.141u4.
From MAME 0.250 after entering service mode:
pirates
ROM set changed: no
0.106-0.168: pirates - "Pirates"
0.169-0.250: pirates - "Pirates (set 1)"
MAME History:
- 0.169: Caius added clone Pirates (set 2). Changed parent description to 'Pirates (set 1)'.
Resolution, 0.106-0.250: 288x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/pirates/mame/
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78905
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78906
Service Mode:
All relevant rules are covered by internal settings. If not shown during playback, use F2 to access after playback completed. Navigation is with P1 Up & Down. Select menu option with P1 Button 1 and sub-menus are typically exited with either P1 Start and/or P2 Start.
Default Settings:
0.106-0.168: pirates - "Pirates"
0.169-0.250: pirates - "Pirates (set 1)"
MAME History:
- 0.169: Caius added clone Pirates (set 2). Changed parent description to 'Pirates (set 1)'.
Resolution, 0.106-0.250: 288x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/pirates/mame/
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78905
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78906
Service Mode:
All relevant rules are covered by internal settings. If not shown during playback, use F2 to access after playback completed. Navigation is with P1 Up & Down. Select menu option with P1 Button 1 and sub-menus are typically exited with either P1 Start and/or P2 Start.
Default Settings:
piratetr
ROM set changed: no
0.106-0.175: piratetr - "Pirate Treasure"
Resolution, 0.106-0.115: 256x256 @ 57.000000Hz
Resolution, 0.116-0.175: 256x256 @ 59.196429Hz
TG Game Entry: https://www.twingalaxies.com/scores....amename=Pirate Treasure
0.106-0.175: piratetr - "Pirate Treasure"
Resolution, 0.106-0.115: 256x256 @ 57.000000Hz
Resolution, 0.116-0.175: 256x256 @ 59.196429Hz
TG Game Entry: https://www.twingalaxies.com/scores....amename=Pirate Treasure
piratpet
ROM set changed: no
0.106-0.175: piratpet - "Pirate Pete"
Resolution, 0.106-0.175: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....amename=Pirate Pete
0.106-0.175: piratpet - "Pirate Pete"
Resolution, 0.106-0.175: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....amename=Pirate Pete
pisces
ROM set changed: no
0.106-0.205: pisces - "Pisces"
Resolution, 0.106-0.113: 256x224 @ 60.606060Hz
Resolution, 0.114-0.123: 256x224 @ 60.606061Hz
Resolution, 0.125-0.205: 768x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/game/pisces/mame
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78907
0.106-0.205: pisces - "Pisces"
Resolution, 0.106-0.113: 256x224 @ 60.606060Hz
Resolution, 0.114-0.123: 256x224 @ 60.606061Hz
Resolution, 0.125-0.205: 768x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/game/pisces/mame
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78907
pistoldm
ROM set changed: no
0.106-0.180: pistoldm - "Pistol Daimyo no Bouken (Japan)"
Resolution, 0.106-0.152: 288x224 @ 60.606060Hz
Resolution, 0.153-0.180: 288x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/scores....en+%5BJapan%5D
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78908
0.106-0.180: pistoldm - "Pistol Daimyo no Bouken (Japan)"
Resolution, 0.106-0.152: 288x224 @ 60.606060Hz
Resolution, 0.153-0.180: 288x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/scores....en+%5BJapan%5D
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78908
pitfall2
ROM set changed: no
0.106-0.113: pitfall2 - "Pitfall II"
0.114-0.202: pitfall2 - "Pitfall II (315-5093)"
Resolution, 0.106-0.130: 256x224 @ 60.000000Hz
Resolution, 0.131-0.144: 256x224 @ 60.096154Hz
Resolution, 0.145-0.202: 512x224 @ 60.096154Hz
TG Game Entry: https://www.twingalaxies.com/game/pi...-caverns/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=9817
0.106-0.113: pitfall2 - "Pitfall II"
0.114-0.202: pitfall2 - "Pitfall II (315-5093)"
Resolution, 0.106-0.130: 256x224 @ 60.000000Hz
Resolution, 0.131-0.144: 256x224 @ 60.096154Hz
Resolution, 0.145-0.202: 512x224 @ 60.096154Hz
TG Game Entry: https://www.twingalaxies.com/game/pi...-caverns/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=9817
pitfigh6
ROM set changed: yes
0.106-0.130: pitfight - "Pit Fighter (rev 5)"
0.130u3-0.133: pitfigh6 - "Pit Fighter (rev 6)"
0.133u1-0.178: pitfight6 - "Pit Fighter (rev 6)"
MAME History:
- 0.130u3: Smitdogg added Pit Fighter (rev 7). Changed 'Pit Fighter (rev 5)' to clone '(rev 6)'. Renamed (pitfight) to (pitfigh6).
- 0.133u1: Renamed (pitfigh6) to (pitfight6), (pitfigh5) to (pitfight5), (pitfigh4) to (pitfight4), (pitfigh3) to (pitfight3), (pitfighj) to (pitfightj) and (pitfighb) to (pitfightb).
Resolution, 0.106-0.114: 336x240 @ 60.000000Hz
Resolution, 0.115-0.178: 336x240 @ 59.922743Hz
TG Game Entry: https://www.twingalaxies.com/scores....t%20Fighter%20[rev%205]
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78910
Rules, Points [Three Player Team]: https://www.twingalaxies.com/scores.php?scores=78912
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78911
0.106-0.130: pitfight - "Pit Fighter (rev 5)"
0.130u3-0.133: pitfigh6 - "Pit Fighter (rev 6)"
0.133u1-0.178: pitfight6 - "Pit Fighter (rev 6)"
MAME History:
- 0.130u3: Smitdogg added Pit Fighter (rev 7). Changed 'Pit Fighter (rev 5)' to clone '(rev 6)'. Renamed (pitfight) to (pitfigh6).
- 0.133u1: Renamed (pitfigh6) to (pitfight6), (pitfigh5) to (pitfight5), (pitfigh4) to (pitfight4), (pitfigh3) to (pitfight3), (pitfighj) to (pitfightj) and (pitfighb) to (pitfightb).
Resolution, 0.106-0.114: 336x240 @ 60.000000Hz
Resolution, 0.115-0.178: 336x240 @ 59.922743Hz
TG Game Entry: https://www.twingalaxies.com/scores....t%20Fighter%20[rev%205]
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78910
Rules, Points [Three Player Team]: https://www.twingalaxies.com/scores.php?scores=78912
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78911
pitfight6
ROM set changed: yes
0.106-0.130: pitfight - "Pit Fighter (rev 5)"
0.130u3-0.133: pitfigh6 - "Pit Fighter (rev 6)"
0.133u1-0.178: pitfight6 - "Pit Fighter (rev 6)"
MAME History:
- 0.130u3: Smitdogg added Pit Fighter (rev 7). Changed 'Pit Fighter (rev 5)' to clone '(rev 6)'. Renamed (pitfight) to (pitfigh6).
- 0.133u1: Renamed (pitfigh6) to (pitfight6), (pitfigh5) to (pitfight5), (pitfigh4) to (pitfight4), (pitfigh3) to (pitfight3), (pitfighj) to (pitfightj) and (pitfighb) to (pitfightb).
Resolution, 0.106-0.114: 336x240 @ 60.000000Hz
Resolution, 0.115-0.178: 336x240 @ 59.922743Hz
TG Game Entry: https://www.twingalaxies.com/scores....t%20Fighter%20[rev%205]
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78910
Rules, Points [Three Player Team]: https://www.twingalaxies.com/scores.php?scores=78912
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78911
0.106-0.130: pitfight - "Pit Fighter (rev 5)"
0.130u3-0.133: pitfigh6 - "Pit Fighter (rev 6)"
0.133u1-0.178: pitfight6 - "Pit Fighter (rev 6)"
MAME History:
- 0.130u3: Smitdogg added Pit Fighter (rev 7). Changed 'Pit Fighter (rev 5)' to clone '(rev 6)'. Renamed (pitfight) to (pitfigh6).
- 0.133u1: Renamed (pitfigh6) to (pitfight6), (pitfigh5) to (pitfight5), (pitfigh4) to (pitfight4), (pitfigh3) to (pitfight3), (pitfighj) to (pitfightj) and (pitfighb) to (pitfightb).
Resolution, 0.106-0.114: 336x240 @ 60.000000Hz
Resolution, 0.115-0.178: 336x240 @ 59.922743Hz
TG Game Entry: https://www.twingalaxies.com/scores....t%20Fighter%20[rev%205]
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78910
Rules, Points [Three Player Team]: https://www.twingalaxies.com/scores.php?scores=78912
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78911
pitfight7
Note: not currently represented on TG.
ROM set changed: yes. Added in 0.130u3.
0.130u3-0.136: pitfight - "Pit Fighter (rev 7)"
0.136u4-0.178: pitfight7 - "Pit Fighter (rev 7)"
MAME History:
- 0.130u3: Smitdogg added Pit Fighter (rev 7). Changed 'Pit Fighter (rev 5)' to clone '(rev 6)'. Renamed (pitfight) to (pitfigh6).
- 0.136u4: B. Sparks, Smitdogg and The Dumping Union added Pit Fighter (rev 9). Renamed (pitfight) to (pitfight7).
Resolution, 0.131-0.178: 336x240 @ 59.922743Hz
Rules: [not currently tracked]
ROM set changed: yes. Added in 0.130u3.
0.130u3-0.136: pitfight - "Pit Fighter (rev 7)"
0.136u4-0.178: pitfight7 - "Pit Fighter (rev 7)"
MAME History:
- 0.130u3: Smitdogg added Pit Fighter (rev 7). Changed 'Pit Fighter (rev 5)' to clone '(rev 6)'. Renamed (pitfight) to (pitfigh6).
- 0.136u4: B. Sparks, Smitdogg and The Dumping Union added Pit Fighter (rev 9). Renamed (pitfight) to (pitfight7).
Resolution, 0.131-0.178: 336x240 @ 59.922743Hz
Rules: [not currently tracked]
pitfight
Note: three ROM sets represented here with changeovers at 0.130u3 and then 0.136u4.
MAME History:
- 0.130u3: Smitdogg added Pit Fighter (rev 7). Changed 'Pit Fighter (rev 5)' to clone '(rev 6)'. Renamed (pitfight) to (pitfigh6).
- 0.133u1: Renamed (pitfigh6) to (pitfight6), (pitfigh5) to (pitfight5), (pitfigh4) to (pitfight4), (pitfigh3) to (pitfight3), (pitfighj) to (pitfightj) and (pitfighb) to (pitfightb).
- 0.136u4: B. Sparks, Smitdogg and The Dumping Union added Pit Fighter (rev 9). Renamed (pitfight) to (pitfight7).
Pit Fighter (rev 6) (was 5!)
-------------------
ROM set changed: yes
0.106-0.130: pitfight - "Pit Fighter (rev 5)"
0.130u3-0.133: pitfigh6 - "Pit Fighter (rev 6)"
0.133u1-0.178: pitfight6 - "Pit Fighter (rev 6)"
Resolution, 0.106-0.114: 336x240 @ 60.000000Hz
Resolution, 0.115-0.178: 336x240 @ 59.922743Hz
TG Game Entry: https://www.twingalaxies.com/scores....t%20Fighter%20[rev%205]
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78910
Rules, Points [Three Player Team]: https://www.twingalaxies.com/scores.php?scores=78912
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78911
Pit Fighter (rev 7)
-------------------
Note: not currently represented on TG.
ROM set changed: yes. Added in 0.130u3.
0.130u3-0.136: pitfight - "Pit Fighter (rev 7)"
0.136u4-0.178: pitfight7 - "Pit Fighter (rev 7)"
Resolution, 0.131-0.178: 336x240 @ 59.922743Hz
Rules: [not currently tracked]
Pit Fighter (rev 9)
-------------------
Note: not currently represented on TG.
ROM set changed: no. Added in 0.136u4.
0.136u4-0.178: pitfight - "Pit Fighter (rev 9)"
Resolution, 0.137-0.178: 336x240 @ 59.922743Hz
Rules: [not currently tracked]
MAME History:
- 0.130u3: Smitdogg added Pit Fighter (rev 7). Changed 'Pit Fighter (rev 5)' to clone '(rev 6)'. Renamed (pitfight) to (pitfigh6).
- 0.133u1: Renamed (pitfigh6) to (pitfight6), (pitfigh5) to (pitfight5), (pitfigh4) to (pitfight4), (pitfigh3) to (pitfight3), (pitfighj) to (pitfightj) and (pitfighb) to (pitfightb).
- 0.136u4: B. Sparks, Smitdogg and The Dumping Union added Pit Fighter (rev 9). Renamed (pitfight) to (pitfight7).
Pit Fighter (rev 6) (was 5!)
-------------------
ROM set changed: yes
0.106-0.130: pitfight - "Pit Fighter (rev 5)"
0.130u3-0.133: pitfigh6 - "Pit Fighter (rev 6)"
0.133u1-0.178: pitfight6 - "Pit Fighter (rev 6)"
Resolution, 0.106-0.114: 336x240 @ 60.000000Hz
Resolution, 0.115-0.178: 336x240 @ 59.922743Hz
TG Game Entry: https://www.twingalaxies.com/scores....t%20Fighter%20[rev%205]
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78910
Rules, Points [Three Player Team]: https://www.twingalaxies.com/scores.php?scores=78912
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78911
Pit Fighter (rev 7)
-------------------
Note: not currently represented on TG.
ROM set changed: yes. Added in 0.130u3.
0.130u3-0.136: pitfight - "Pit Fighter (rev 7)"
0.136u4-0.178: pitfight7 - "Pit Fighter (rev 7)"
Resolution, 0.131-0.178: 336x240 @ 59.922743Hz
Rules: [not currently tracked]
Pit Fighter (rev 9)
-------------------
Note: not currently represented on TG.
ROM set changed: no. Added in 0.136u4.
0.136u4-0.178: pitfight - "Pit Fighter (rev 9)"
Resolution, 0.137-0.178: 336x240 @ 59.922743Hz
Rules: [not currently tracked]
pitnrun
ROM set changed: no
0.106-0.141: pitnrun - "Pit & Run (set 1)"
0.142-0.175: pitnrun - "Pit & Run - F-1 Race (set 1)"
Resolution, 0.106-0.175: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....6&gamename=Pit %26 Run
0.106-0.141: pitnrun - "Pit & Run (set 1)"
0.142-0.175: pitnrun - "Pit & Run - F-1 Race (set 1)"
Resolution, 0.106-0.175: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....6&gamename=Pit %26 Run
pkunwar
ROM set changed: no
0.106-0.175: pkunwar - "Penguin-Kun Wars (US)"
Resolution, 0.106-0.175: 256x192 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....me=Penguin-Kun Wars [US]
0.106-0.175: pkunwar - "Penguin-Kun Wars (US)"
Resolution, 0.106-0.175: 256x192 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....me=Penguin-Kun Wars [US]
platoon
ROM set changed: YES
0.106-0.177: platoon - "Vs. Platoon"
0.178- : nvs_platoon - "Vs. Platoon"
MAME History:
- 0.178: Renamed (platoon) to (nvs_platoon).
Resolution, 0.106-0.178: 256x240 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....me=Vs.+Platoon
Rules, Points: https://www.twingalaxies.com/scores.php?scores=120590
0.106-0.177: platoon - "Vs. Platoon"
0.178- : nvs_platoon - "Vs. Platoon"
MAME History:
- 0.178: Renamed (platoon) to (nvs_platoon).
Resolution, 0.106-0.178: 256x240 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....me=Vs.+Platoon
Rules, Points: https://www.twingalaxies.com/scores.php?scores=120590
playball
ROM set changed: no
0.106-0.200: playball - "PlayBall! (prototype)"
Resolution, 0.106-0.115: 292x231 @ 60.000000Hz
Resolution, 0.116-0.153: 292x231 @ 60.096154Hz
Resolution, 0.154-0.200: 292x232 @ 60.096154Hz
TG Game Entry: https://www.twingalaxies.com/game/pl...rototype/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78914
NOTE: All relevant rules are covered by internal settings. If not shown during playback, use F2 to access after playback completed (Left/Right to navigate, 1P start to select).
0.106-0.200: playball - "PlayBall! (prototype)"
Resolution, 0.106-0.115: 292x231 @ 60.000000Hz
Resolution, 0.116-0.153: 292x231 @ 60.096154Hz
Resolution, 0.154-0.200: 292x232 @ 60.096154Hz
TG Game Entry: https://www.twingalaxies.com/game/pl...rototype/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78914
NOTE: All relevant rules are covered by internal settings. If not shown during playback, use F2 to access after playback completed (Left/Right to navigate, 1P start to select).
plegends
ROM set changed: no
0.106-0.121: plegends - "Power Instinct Legends (USA)"
0.122-0.140: plegends - "Power Instinct Legends (US, Ver. 95/06/20)"
0.141-0.240: plegends - "Gogetsuji Legends (US, Ver. 95/06/20)"
0.241-0.250: plegends - "Gogetsuji Legends (US, Ver. 95.06.20)"
MAME History:
- 0.113u2: Changed VSync to 57.550645 Hz.
- 0.122: Changed description to 'Power Instinct Legends (US, Ver. 95/06/20)' and clone (Japan) to 'Gouketsuji Ichizoku Saikyou Densetsu (Japan, Ver. 95/06/20)'.
- 0.140u3: Changed description to 'Gogetsuji Legends (US, Ver. 95/06/20)' and clone (Japan, Ver. 95/06/20) to 'Gouketsuji Gaiden - Saikyou Densetsu (Japan, Ver. 95/06/20)'.
- 0.241: Changed description to 'Gogetsuji Legends (US, Ver. 95.06.20)' and clone (Japan, Ver. 95/06/20) to 'Gouketsuji Gaiden - Saikyou Densetsu (Japan, Ver. 95.06.20)'.
Resolution, 0.106-0.113: 320x240 @ 57.550644Hz
Resolution, 0.114-0.250: 320x240 @ 57.550645Hz
TG Game Entry: https://www.twingalaxies.com/game/po...ends-usa/mame/
Rules, Points [Tournament Settings]: https://www.twingalaxies.com/scores.php?scores=78961
Boot Up:
Without any NVRAM a red notice should appear at the bottom of the first screen indicating:
"FIRST BOOT UP IS.
FLASH EEP ROM DEFAULT INITIALIZED."
Service Mode:
Typical Cave (Motorola 68000) BIOS
All relevant rules are covered by internal settings. If not shown during playback, hold the Service button (F2) to access after playback completed. Navigation is with P1 Up & Down, selection is with P1 Button 1.
Default Settings:
| 
0.106-0.121: plegends - "Power Instinct Legends (USA)"
0.122-0.140: plegends - "Power Instinct Legends (US, Ver. 95/06/20)"
0.141-0.240: plegends - "Gogetsuji Legends (US, Ver. 95/06/20)"
0.241-0.250: plegends - "Gogetsuji Legends (US, Ver. 95.06.20)"
MAME History:
- 0.113u2: Changed VSync to 57.550645 Hz.
- 0.122: Changed description to 'Power Instinct Legends (US, Ver. 95/06/20)' and clone (Japan) to 'Gouketsuji Ichizoku Saikyou Densetsu (Japan, Ver. 95/06/20)'.
- 0.140u3: Changed description to 'Gogetsuji Legends (US, Ver. 95/06/20)' and clone (Japan, Ver. 95/06/20) to 'Gouketsuji Gaiden - Saikyou Densetsu (Japan, Ver. 95/06/20)'.
- 0.241: Changed description to 'Gogetsuji Legends (US, Ver. 95.06.20)' and clone (Japan, Ver. 95/06/20) to 'Gouketsuji Gaiden - Saikyou Densetsu (Japan, Ver. 95.06.20)'.
Resolution, 0.106-0.113: 320x240 @ 57.550644Hz
Resolution, 0.114-0.250: 320x240 @ 57.550645Hz
TG Game Entry: https://www.twingalaxies.com/game/po...ends-usa/mame/
Rules, Points [Tournament Settings]: https://www.twingalaxies.com/scores.php?scores=78961
Boot Up:
Without any NVRAM a red notice should appear at the bottom of the first screen indicating:
"FIRST BOOT UP IS.
FLASH EEP ROM DEFAULT INITIALIZED."
Service Mode:
Typical Cave (Motorola 68000) BIOS
All relevant rules are covered by internal settings. If not shown during playback, hold the Service button (F2) to access after playback completed. Navigation is with P1 Up & Down, selection is with P1 Button 1.
Default Settings:
pleiads
ROM set changed: no
0.106-0.175: pleiads - "Pleiads (Tehkan)"
Resolution, 0.106-0.122: 248x208 @ 60.000000Hz
Resolution, 0.123-0.175: 256x208 @ 61.035156Hz
TG Game Entry: https://www.twingalaxies.com/scores....mename=Pleiads [Tehkan]
0.106-0.175: pleiads - "Pleiads (Tehkan)"
Resolution, 0.106-0.122: 248x208 @ 60.000000Hz
Resolution, 0.123-0.175: 256x208 @ 61.035156Hz
TG Game Entry: https://www.twingalaxies.com/scores....mename=Pleiads [Tehkan]
plottina
ROM set changed: yes
0.106-0.112: plotting - "Plotting (World set 1)"
0.113-0.130: plottina - "Plotting (World set 2, Protected)"
0.130u4-0.175: plottinga - "Plotting (World set 2, protected)"
MAME History:
- 0.113: Stefan Lindberg added clones Plotting (World set 3, Earliest Version) and Flipull (Japan). Changed 'Plotting (World set 1)' to clone '(World set 2, Protected)' and '(World set 2)' to parent 'Plotting (World set 1)'. Renamed (plotting) to (plottina) and (plottina) to (plotting).
- 0.130u4: Renamed (plottina) to (plottinga), (plottinb) to (plottingb) and (plottinu) to (plottingu).
Resolution, 0.106-0.175: 320x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....me=Plotting%20[World%20set%201]
Rules, Points: https://www.twingalaxies.com/scores.php?scores=18990
0.106-0.112: plotting - "Plotting (World set 1)"
0.113-0.130: plottina - "Plotting (World set 2, Protected)"
0.130u4-0.175: plottinga - "Plotting (World set 2, protected)"
MAME History:
- 0.113: Stefan Lindberg added clones Plotting (World set 3, Earliest Version) and Flipull (Japan). Changed 'Plotting (World set 1)' to clone '(World set 2, Protected)' and '(World set 2)' to parent 'Plotting (World set 1)'. Renamed (plotting) to (plottina) and (plottina) to (plotting).
- 0.130u4: Renamed (plottina) to (plottinga), (plottinb) to (plottingb) and (plottinu) to (plottingu).
Resolution, 0.106-0.175: 320x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....me=Plotting%20[World%20set%201]
Rules, Points: https://www.twingalaxies.com/scores.php?scores=18990
plottinga
ROM set changed: yes
0.106-0.112: plotting - "Plotting (World set 1)"
0.113-0.130: plottina - "Plotting (World set 2, Protected)"
0.130u4-0.175: plottinga - "Plotting (World set 2, protected)"
MAME History:
- 0.113: Stefan Lindberg added clones Plotting (World set 3, Earliest Version) and Flipull (Japan). Changed 'Plotting (World set 1)' to clone '(World set 2, Protected)' and '(World set 2)' to parent 'Plotting (World set 1)'. Renamed (plotting) to (plottina) and (plottina) to (plotting).
- 0.130u4: Renamed (plottina) to (plottinga), (plottinb) to (plottingb) and (plottinu) to (plottingu).
Resolution, 0.106-0.175: 320x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....me=Plotting%20[World%20set%201]
Rules, Points: https://www.twingalaxies.com/scores.php?scores=18990
0.106-0.112: plotting - "Plotting (World set 1)"
0.113-0.130: plottina - "Plotting (World set 2, Protected)"
0.130u4-0.175: plottinga - "Plotting (World set 2, protected)"
MAME History:
- 0.113: Stefan Lindberg added clones Plotting (World set 3, Earliest Version) and Flipull (Japan). Changed 'Plotting (World set 1)' to clone '(World set 2, Protected)' and '(World set 2)' to parent 'Plotting (World set 1)'. Renamed (plotting) to (plottina) and (plottina) to (plotting).
- 0.130u4: Renamed (plottina) to (plottinga), (plottinb) to (plottingb) and (plottinu) to (plottingu).
Resolution, 0.106-0.175: 320x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....me=Plotting%20[World%20set%201]
Rules, Points: https://www.twingalaxies.com/scores.php?scores=18990
plotting
Note: two ROM sets represented here with changeover at 0.113.
MAME History:
- 0.113: Stefan Lindberg added clones Plotting (World set 3, Earliest Version) and Flipull (Japan). Changed 'Plotting (World set 1)' to clone '(World set 2, Protected)' and '(World set 2)' to parent 'Plotting (World set 1)'. Renamed (plotting) to (plottina) and (plottina) to (plotting).
- 0.130u4: Renamed (plottina) to (plottinga), (plottinb) to (plottingb) and (plottinu) to (plottingu).
Plotting (World set 2, protected)
---------------------------------
ROM set changed: yes
0.106-0.112: plotting - "Plotting (World set 1)"
0.113-0.130: plottina - "Plotting (World set 2, Protected)"
0.130u4-0.175: plottinga - "Plotting (World set 2, protected)"
Resolution, 0.106-0.175: 320x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....me=Plotting%20[World%20set%201]
Rules, Points: https://www.twingalaxies.com/scores.php?scores=18990
Plotting (World set 1)
----------------------
Note: not currently represented at TG.
ROM set changed: no
0.113-0.176: plotting - "Plotting (World set 1)"
Resolution, 0.113-0.176: 320x224 @ 60.000000Hz
Rules: [no current tracks]
MAME History:
- 0.113: Stefan Lindberg added clones Plotting (World set 3, Earliest Version) and Flipull (Japan). Changed 'Plotting (World set 1)' to clone '(World set 2, Protected)' and '(World set 2)' to parent 'Plotting (World set 1)'. Renamed (plotting) to (plottina) and (plottina) to (plotting).
- 0.130u4: Renamed (plottina) to (plottinga), (plottinb) to (plottingb) and (plottinu) to (plottingu).
Plotting (World set 2, protected)
---------------------------------
ROM set changed: yes
0.106-0.112: plotting - "Plotting (World set 1)"
0.113-0.130: plottina - "Plotting (World set 2, Protected)"
0.130u4-0.175: plottinga - "Plotting (World set 2, protected)"
Resolution, 0.106-0.175: 320x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....me=Plotting%20[World%20set%201]
Rules, Points: https://www.twingalaxies.com/scores.php?scores=18990
Plotting (World set 1)
----------------------
Note: not currently represented at TG.
ROM set changed: no
0.113-0.176: plotting - "Plotting (World set 1)"
Resolution, 0.113-0.176: 320x224 @ 60.000000Hz
Rules: [no current tracks]
plsmaswd
ROM set changed: no
0.106-0.144: plsmaswd - "Plasma Sword (USA 980316)"
0.145-0.175: plsmaswd - "Plasma Sword: Nightmare of Bilstein (USA 980316)"
Resolution, 0.106-0.175: 640x480 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....amename=Plasma Sword: Nightmare of Bilstein [USA 980316]
0.106-0.144: plsmaswd - "Plasma Sword (USA 980316)"
0.145-0.175: plsmaswd - "Plasma Sword: Nightmare of Bilstein (USA 980316)"
Resolution, 0.106-0.175: 640x480 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....amename=Plasma Sword: Nightmare of Bilstein [USA 980316]
plumppop
ROM set changed: no
0.106-0.175: plumppop - "Plump Pop (Japan)"
Resolution, 0.106-0.175: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....gamename=Plump Pop [Japan]
0.106-0.175: plumppop - "Plump Pop (Japan)"
Resolution, 0.106-0.175: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....gamename=Plump Pop [Japan]
plusalph
ROM set changed: no
0.106-0.250: plusalph - "Plus Alpha"
MAME History:
- 0.169: [...] MegaSys1 apparently runs at 56.18Hz, based on video references, this is the same as NMK16 [David Haywood]. [...] Changed VSync to 56.191350 or 56.18 Hz.
Resolution, 0.106-0.168: 256x224 @ 60.000000Hz
Resolution, 0.169-0.250: 256x224 @ 56.191350Hz
TG Game Entry: https://www.twingalaxies.com/game/plus-alpha/mame/
Points: https://www.twingalaxies.com/scores.php?scores=78916
Service Mode:
Jaleco Mega System 1 BIOS.
No service mode. A binary representation of the DIP switches is shown during boot up. Changes in DIP switch settings do not require a reboot so it is necessary to check the DIP switches at the time of credit insertion.
Default Settings:
| 
0.106-0.250: plusalph - "Plus Alpha"
MAME History:
- 0.169: [...] MegaSys1 apparently runs at 56.18Hz, based on video references, this is the same as NMK16 [David Haywood]. [...] Changed VSync to 56.191350 or 56.18 Hz.
Resolution, 0.106-0.168: 256x224 @ 60.000000Hz
Resolution, 0.169-0.250: 256x224 @ 56.191350Hz
TG Game Entry: https://www.twingalaxies.com/game/plus-alpha/mame/
Points: https://www.twingalaxies.com/scores.php?scores=78916
Service Mode:
Jaleco Mega System 1 BIOS.
No service mode. A binary representation of the DIP switches is shown during boot up. Changes in DIP switch settings do not require a reboot so it is necessary to check the DIP switches at the time of credit insertion.
Default Settings:
pnickj
ROM set changed: no
0.106-0.205: pnickj - "Pnickies (Japan 940608)"
From MAMEINFO.DAT:
[from cps1.c]
- 0.148u5: Andrew Gardner added QSound internal DSP ROM to the device. Added DSP16 (4MHz) CPU3. Sonikos fixed 'Difficulty' dipswitch which has in the tab menu values from 1 (easiest) to 8 (hardest) but in the game's menu it's from 0 to 7.
Resolution, 0.106-0.126: 384x224 @ 60.000000Hz
Resolution, 0.127-0.147: 384x224 @ 59.610000Hz
Resolution, 0.148-0.152: 384x224 @ 59.629403Hz
Resolution, 0.153-0.205: 384x224 @ 59.637405Hz
TG Game Entry: https://www.twingalaxies.com/game/pn...an-940608/mame
Rules, Points: https://www.twingalaxies.com/scores.php?scores=7789
NOTE: from 0.148u5 onwards, Difficulty settings have been relabelled. Verify with caution.
0.106-0.205: pnickj - "Pnickies (Japan 940608)"
From MAMEINFO.DAT:
[from cps1.c]
- 0.148u5: Andrew Gardner added QSound internal DSP ROM to the device. Added DSP16 (4MHz) CPU3. Sonikos fixed 'Difficulty' dipswitch which has in the tab menu values from 1 (easiest) to 8 (hardest) but in the game's menu it's from 0 to 7.
Resolution, 0.106-0.126: 384x224 @ 60.000000Hz
Resolution, 0.127-0.147: 384x224 @ 59.610000Hz
Resolution, 0.148-0.152: 384x224 @ 59.629403Hz
Resolution, 0.153-0.205: 384x224 @ 59.637405Hz
TG Game Entry: https://www.twingalaxies.com/game/pn...an-940608/mame
Rules, Points: https://www.twingalaxies.com/scores.php?scores=7789
NOTE: from 0.148u5 onwards, Difficulty settings have been relabelled. Verify with caution.
pnyaaa, pnyaa
Note: two ROM sets represented here with changeover at 0.197.
MAME History:
- 0.113u2: Zsolt Vasvari updated NeoGeo driver to the new video timing code and screen raw parameters, this fixes also the messed up graphics. Changed VSync to 59.185606 Hz.
- 0.129u3: Fabio Priuli added missing HARDDIP settings in 'STANDARD_DIPS' for DIP's 4,5 and 6 ("COMM Setting"). Added dipswitches 'COMM Setting (Cabinet No.)' and 'COMM Setting (Link Enable)'.
- 0.143u1: Fixed rom names. Changed description to 'Sengoku / Sengoku Denshou (NGM-017)(NGH-017)' and clone (set 2) to 'Sengoku / Sengoku Denshou (NGH-017)(US)'.
- 0.150: Endian fix for kof2003 protection (machine\neocrypt.c and neoprot.c). Fixed NeoGeo memory leak, clean up inputs a bit [Alex Jackson]. Changed 'Test Switch' dipswitch to 'Service Mode'.
- 0.151: [- snip -] [Alex Jackson]. Added coin slots 3 and 4. Added dipswitches 'Setting Mode', 'Cabinet' and 'Controller'.
- 0.197: Razoola added Pochi and Nyaa (Ver 2.02). Changed Pochi and Nyaa to clone 'Pochi and Nyaa (Ver 2.00)'. Renamed (pnyaa) to (pnyaaa).
Pochi and Nyaa (Ver 2.00)
-------------------------
ROM set changed: yes.
0.106-0.196: pnyaa - "Pochi and Nyaa"
0.197-0.260: pnyaaa - "Pochi and Nyaa (Ver 2.00)"
Resolution, 0.106-0.113: 320x224 @ 59.185608Hz
Resolution, 0.114-0.260: 320x224 @ 59.185606Hz
TG Game Entry: https://www.twingalaxies.com/game/pochi-and-nyaa/mame/
Rules, Points [PochiNyaa Attack - Beginner Mode]: https://www.twingalaxies.com/scores.php?scores=78917
Rules, Points [1 Player PochiNyaa - Story Mode]: https://www.twingalaxies.com/scores.php?scores=78920
Rules, Points [PochiNyaa Attack - Expert Mode]: https://www.twingalaxies.com/scores.php?scores=78918
Rules, Points [PochiNyaa Attack - Survival Mode]: https://www.twingalaxies.com/scores.php?scores=78919
Pochi and Nyaa (Ver 2.02)
-------------------------
Note: not currently represented on TG.
ROM set changed: no. Added in 0.197.
0.197-0.260: pnyaa - "Pochi and Nyaa (Ver 2.02)"
Resolution, 0.197-0.260: 320x224 @ 59.185606Hz
Rules: [no current tracks]
Service Mode:
Standard SNK NeoGeo BIOS.
All relevant rules are covered by internal settings. If not shown during playback, use F2 to access after playback completed. Navigation is with P1 Up & Down. Select menu option with P1 Button 1 and sub-menus can be exited with P1 Button 3. P1 Button 1 and P1 Button 2 adjust individual configuration options.
Default Settings:
MAME 0.106 DIP Switches:
MAME 0.130 DIP Switches:
MAME 0.150 DIP Switches:
MAME 0.151 DIP Switches:
MAME 0.250 pnyaaa (v2.00) DIP Switches:
|
MAME 0.250 BIOS:
Cartridge:
| 
MAME History:
- 0.113u2: Zsolt Vasvari updated NeoGeo driver to the new video timing code and screen raw parameters, this fixes also the messed up graphics. Changed VSync to 59.185606 Hz.
- 0.129u3: Fabio Priuli added missing HARDDIP settings in 'STANDARD_DIPS' for DIP's 4,5 and 6 ("COMM Setting"). Added dipswitches 'COMM Setting (Cabinet No.)' and 'COMM Setting (Link Enable)'.
- 0.143u1: Fixed rom names. Changed description to 'Sengoku / Sengoku Denshou (NGM-017)(NGH-017)' and clone (set 2) to 'Sengoku / Sengoku Denshou (NGH-017)(US)'.
- 0.150: Endian fix for kof2003 protection (machine\neocrypt.c and neoprot.c). Fixed NeoGeo memory leak, clean up inputs a bit [Alex Jackson]. Changed 'Test Switch' dipswitch to 'Service Mode'.
- 0.151: [- snip -] [Alex Jackson]. Added coin slots 3 and 4. Added dipswitches 'Setting Mode', 'Cabinet' and 'Controller'.
- 0.197: Razoola added Pochi and Nyaa (Ver 2.02). Changed Pochi and Nyaa to clone 'Pochi and Nyaa (Ver 2.00)'. Renamed (pnyaa) to (pnyaaa).
Pochi and Nyaa (Ver 2.00)
-------------------------
ROM set changed: yes.
0.106-0.196: pnyaa - "Pochi and Nyaa"
0.197-0.260: pnyaaa - "Pochi and Nyaa (Ver 2.00)"
Resolution, 0.106-0.113: 320x224 @ 59.185608Hz
Resolution, 0.114-0.260: 320x224 @ 59.185606Hz
TG Game Entry: https://www.twingalaxies.com/game/pochi-and-nyaa/mame/
Rules, Points [PochiNyaa Attack - Beginner Mode]: https://www.twingalaxies.com/scores.php?scores=78917
Rules, Points [1 Player PochiNyaa - Story Mode]: https://www.twingalaxies.com/scores.php?scores=78920
Rules, Points [PochiNyaa Attack - Expert Mode]: https://www.twingalaxies.com/scores.php?scores=78918
Rules, Points [PochiNyaa Attack - Survival Mode]: https://www.twingalaxies.com/scores.php?scores=78919
Pochi and Nyaa (Ver 2.02)
-------------------------
Note: not currently represented on TG.
ROM set changed: no. Added in 0.197.
0.197-0.260: pnyaa - "Pochi and Nyaa (Ver 2.02)"
Resolution, 0.197-0.260: 320x224 @ 59.185606Hz
Rules: [no current tracks]
Service Mode:
Standard SNK NeoGeo BIOS.
All relevant rules are covered by internal settings. If not shown during playback, use F2 to access after playback completed. Navigation is with P1 Up & Down. Select menu option with P1 Button 1 and sub-menus can be exited with P1 Button 3. P1 Button 1 and P1 Button 2 adjust individual configuration options.
Default Settings:
MAME 0.106 DIP Switches:
MAME 0.130 DIP Switches:
MAME 0.150 DIP Switches:
MAME 0.151 DIP Switches:
MAME 0.250 pnyaaa (v2.00) DIP Switches:
MAME 0.250 BIOS:
Cartridge:
pocketrc
ROM set changed: no
0.108u5-0.130: pocketrc - "Pocket Racer (PKR1/VER.B)"
0.130u1-0.195: pocketrc - "Pocket Racer (Japan, PKR1/VER.B)"
MAME History:
- 0.130u1: Changed description to 'Pocket Racer (Japan, PKR1/VER.B)'.
- 0.143u5: hap fixed Pocket Racer runs too fast. Changed M37702 CPU2 and C352 sound clock speeds to 16934400 Hz. Added 2x buttons.
Resolution, 0.108u5-0.136: 640x480 @ 60.000000Hz
Resolution, 0.137-0.143: 640x480 @ 30.000000Hz
Resolution, 0.144-0.195: 640x480 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/po...r1-ver-b/mame/
Rules, Mountain Course (Fastest Lap - Normal Racer): https://www.twingalaxies.com/scores.php?scores=207576
Rules, Mountain Course (Fastest Lap - Pocket Racer): https://www.twingalaxies.com/scores.php?scores=207574
Rules, Mountain Course (Fastest Race - Normal Racer): https://www.twingalaxies.com/scores.php?scores=207577
Rules, Mountain Course (Fastest Race - Pocket Racer): https://www.twingalaxies.com/scores.php?scores=207575
Rules, Seaside Course (Fastest Lap - Normal Racer): https://www.twingalaxies.com/scores.php?scores=207572
Rules, Seaside Course (Fastest Lap - Pocket Racer): https://www.twingalaxies.com/scores.php?scores=207570
Rules, Seaside Course (Fastest Race - Normal Racer): https://www.twingalaxies.com/scores.php?scores=207573
Rules, Seaside Course (Fastest Race - Pocket Racer): https://www.twingalaxies.com/scores.php?scores=207571
NOTE: The rule sets for these tracks contain both DIPs & internal settings.
However, it appears that in later versions, you can't return to game mode after entering Service Mode [F2], so I'm not sure how anyone could play with altered internal settings.
While in earlier versions, the game runs too fast and wasn't really playable - fixed in 0.143u5.
0.108u5-0.130: pocketrc - "Pocket Racer (PKR1/VER.B)"
0.130u1-0.195: pocketrc - "Pocket Racer (Japan, PKR1/VER.B)"
MAME History:
- 0.130u1: Changed description to 'Pocket Racer (Japan, PKR1/VER.B)'.
- 0.143u5: hap fixed Pocket Racer runs too fast. Changed M37702 CPU2 and C352 sound clock speeds to 16934400 Hz. Added 2x buttons.
Resolution, 0.108u5-0.136: 640x480 @ 60.000000Hz
Resolution, 0.137-0.143: 640x480 @ 30.000000Hz
Resolution, 0.144-0.195: 640x480 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/po...r1-ver-b/mame/
Rules, Mountain Course (Fastest Lap - Normal Racer): https://www.twingalaxies.com/scores.php?scores=207576
Rules, Mountain Course (Fastest Lap - Pocket Racer): https://www.twingalaxies.com/scores.php?scores=207574
Rules, Mountain Course (Fastest Race - Normal Racer): https://www.twingalaxies.com/scores.php?scores=207577
Rules, Mountain Course (Fastest Race - Pocket Racer): https://www.twingalaxies.com/scores.php?scores=207575
Rules, Seaside Course (Fastest Lap - Normal Racer): https://www.twingalaxies.com/scores.php?scores=207572
Rules, Seaside Course (Fastest Lap - Pocket Racer): https://www.twingalaxies.com/scores.php?scores=207570
Rules, Seaside Course (Fastest Race - Normal Racer): https://www.twingalaxies.com/scores.php?scores=207573
Rules, Seaside Course (Fastest Race - Pocket Racer): https://www.twingalaxies.com/scores.php?scores=207571
NOTE: The rule sets for these tracks contain both DIPs & internal settings.
However, it appears that in later versions, you can't return to game mode after entering Service Mode [F2], so I'm not sure how anyone could play with altered internal settings.
While in earlier versions, the game runs too fast and wasn't really playable - fixed in 0.143u5.
poitto
ROM set changed: no
0.106-0.197: poitto - "Poitto!"
Resolution, 0.106-0.144: 360x224 @ 60.000000Hz
Resolution, 0.145-0.146: 360x240 @ 59.922743Hz
Resolution, 0.147-0.191: 360x224 @ 60.000000Hz
Resolution, 0.192-0.197: 360x224 @ 58.232800Hz
TG Game Entry: https://www.twingalaxies.com/game/poitto/mame/
Rules, Points [1 Player VS Computer Mode]: https://www.twingalaxies.com/scores.php?scores=78929
Rules, Points [Monster Mode]: https://www.twingalaxies.com/scores.php?scores=78930
0.106-0.197: poitto - "Poitto!"
Resolution, 0.106-0.144: 360x224 @ 60.000000Hz
Resolution, 0.145-0.146: 360x240 @ 59.922743Hz
Resolution, 0.147-0.191: 360x224 @ 60.000000Hz
Resolution, 0.192-0.197: 360x224 @ 58.232800Hz
TG Game Entry: https://www.twingalaxies.com/game/poitto/mame/
Rules, Points [1 Player VS Computer Mode]: https://www.twingalaxies.com/scores.php?scores=78929
Rules, Points [Monster Mode]: https://www.twingalaxies.com/scores.php?scores=78930
polarisa
Note: two ROM sets represented here with changeover at 0.225.
MAME History:
- 0.137u4: Siftware added clone Polaris (Original version). Changed clone (set 2) to parent 'Polaris (Latest version)' and (set 1) to clone 'Polaris (First revision)'. Renamed (polaris) to (polarisa) and (polarisa) to (polaris).
- 0.225: Andrew Welburn and The Dumping Union added 'Polaris (latest version)'. Fixed rom names. Changed (Latest version) to clone 'Polaris (second revision)' and clones (First revision) to 'Polaris (first revision)' and (Original version) to 'Polaris (original version)'. Renamed (polarisa) to (polarisb) and (polaris) to (polarisa).
Polaris (first revision)
------------------------
ROM set changed: yes
0.106-0.137: polaris - "Polaris (set 1)"
0.138-0.224: polarisa - "Polaris (First revision)"
0.225- : polarisb - "Polaris (first revision)"
Resolution, 0.106-0.113: 240x224 @ 60.000000Hz
Resolution, 0.114-0.225: 260x224 @ 59.541985Hz
TG Game Entry: https://www.twingalaxies.com/game/polaris-set-1/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=7790
Polaris (second revision)
-------------------------
Note: not currently represented at TG.
ROM set changed: yes. Added in 0.137u4.
0.106-0.137: NOT SUPPORTED
0.138-0.224: polaris - "Polaris (Latest version)"
0.225- : polarisa - "Polaris (second revision)"
Resolution, 0.138-0.225: 260x224 @ 59.541985Hz
Rules: [no current tracks]
MAME History:
- 0.137u4: Siftware added clone Polaris (Original version). Changed clone (set 2) to parent 'Polaris (Latest version)' and (set 1) to clone 'Polaris (First revision)'. Renamed (polaris) to (polarisa) and (polarisa) to (polaris).
- 0.225: Andrew Welburn and The Dumping Union added 'Polaris (latest version)'. Fixed rom names. Changed (Latest version) to clone 'Polaris (second revision)' and clones (First revision) to 'Polaris (first revision)' and (Original version) to 'Polaris (original version)'. Renamed (polarisa) to (polarisb) and (polaris) to (polarisa).
Polaris (first revision)
------------------------
ROM set changed: yes
0.106-0.137: polaris - "Polaris (set 1)"
0.138-0.224: polarisa - "Polaris (First revision)"
0.225- : polarisb - "Polaris (first revision)"
Resolution, 0.106-0.113: 240x224 @ 60.000000Hz
Resolution, 0.114-0.225: 260x224 @ 59.541985Hz
TG Game Entry: https://www.twingalaxies.com/game/polaris-set-1/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=7790
Polaris (second revision)
-------------------------
Note: not currently represented at TG.
ROM set changed: yes. Added in 0.137u4.
0.106-0.137: NOT SUPPORTED
0.138-0.224: polaris - "Polaris (Latest version)"
0.225- : polarisa - "Polaris (second revision)"
Resolution, 0.138-0.225: 260x224 @ 59.541985Hz
Rules: [no current tracks]
polarisb
ROM set changed: yes
0.106-0.137: polaris - "Polaris (set 1)"
0.138-0.224: polarisa - "Polaris (First revision)"
0.225- : polarisb - "Polaris (first revision)"
MAME History:
- 0.137u4: Siftware added clone Polaris (Original version). Changed clone (set 2) to parent 'Polaris (Latest version)' and (set 1) to clone 'Polaris (First revision)'. Renamed (polaris) to (polarisa) and (polarisa) to (polaris).
- 0.225: Andrew Welburn and The Dumping Union added 'Polaris (latest version)'. Fixed rom names. Changed (Latest version) to clone 'Polaris (second revision)' and clones (First revision) to 'Polaris (first revision)' and (Original version) to 'Polaris (original version)'. Renamed (polarisa) to (polarisb) and (polaris) to (polarisa).
Resolution, 0.106-0.113: 240x224 @ 60.000000Hz
Resolution, 0.114-0.225: 260x224 @ 59.541985Hz
TG Game Entry: https://www.twingalaxies.com/game/polaris-set-1/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=7790
0.106-0.137: polaris - "Polaris (set 1)"
0.138-0.224: polarisa - "Polaris (First revision)"
0.225- : polarisb - "Polaris (first revision)"
MAME History:
- 0.137u4: Siftware added clone Polaris (Original version). Changed clone (set 2) to parent 'Polaris (Latest version)' and (set 1) to clone 'Polaris (First revision)'. Renamed (polaris) to (polarisa) and (polarisa) to (polaris).
- 0.225: Andrew Welburn and The Dumping Union added 'Polaris (latest version)'. Fixed rom names. Changed (Latest version) to clone 'Polaris (second revision)' and clones (First revision) to 'Polaris (first revision)' and (Original version) to 'Polaris (original version)'. Renamed (polarisa) to (polarisb) and (polaris) to (polarisa).
Resolution, 0.106-0.113: 240x224 @ 60.000000Hz
Resolution, 0.114-0.225: 260x224 @ 59.541985Hz
TG Game Entry: https://www.twingalaxies.com/game/polaris-set-1/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=7790
polaris
Note: three ROM sets represented here with changeover at 0.137u4 & 0.225.
MAME History:
- 0.137u4: Siftware added clone Polaris (Original version). Changed clone (set 2) to parent 'Polaris (Latest version)' and (set 1) to clone 'Polaris (First revision)'. Renamed (polaris) to (polarisa) and (polarisa) to (polaris).
- 0.225: Andrew Welburn and The Dumping Union added 'Polaris (latest version)'. Fixed rom names. Changed (Latest version) to clone 'Polaris (second revision)' and clones (First revision) to 'Polaris (first revision)' and (Original version) to 'Polaris (original version)'. Renamed (polarisa) to (polarisb) and (polaris) to (polarisa).
Polaris (first revision)
------------------------
ROM set changed: yes
0.106-0.137: polaris - "Polaris (set 1)"
0.138-0.224: polarisa - "Polaris (First revision)"
0.225- : polarisb - "Polaris (first revision)"
Resolution, 0.106-0.113: 240x224 @ 60.000000Hz
Resolution, 0.114-0.225: 260x224 @ 59.541985Hz
TG Game Entry: https://www.twingalaxies.com/game/polaris-set-1/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=7790
Polaris (second revision)
-------------------------
Note: not currently represented at TG.
ROM set changed: yes. Added in 0.137u4.
0.106-0.137: NOT SUPPORTED
0.138-0.224: polaris - "Polaris (Latest version)"
0.225- : polarisa - "Polaris (second revision)"
Resolution, 0.138-0.225: 260x224 @ 59.541985Hz
Rules: [no current tracks]
Polaris (latest version)
------------------------
Note: not currently represented at TG.
ROM set changed: no. Added in 0.225.
0.106-0.224: NOT SUPPORTED
0.225- : polarisa - "Polaris (latest version)"
Resolution, 0.225- : 260x224 @ 59.541985Hz
Rules: [no current tracks]
MAME History:
- 0.137u4: Siftware added clone Polaris (Original version). Changed clone (set 2) to parent 'Polaris (Latest version)' and (set 1) to clone 'Polaris (First revision)'. Renamed (polaris) to (polarisa) and (polarisa) to (polaris).
- 0.225: Andrew Welburn and The Dumping Union added 'Polaris (latest version)'. Fixed rom names. Changed (Latest version) to clone 'Polaris (second revision)' and clones (First revision) to 'Polaris (first revision)' and (Original version) to 'Polaris (original version)'. Renamed (polarisa) to (polarisb) and (polaris) to (polarisa).
Polaris (first revision)
------------------------
ROM set changed: yes
0.106-0.137: polaris - "Polaris (set 1)"
0.138-0.224: polarisa - "Polaris (First revision)"
0.225- : polarisb - "Polaris (first revision)"
Resolution, 0.106-0.113: 240x224 @ 60.000000Hz
Resolution, 0.114-0.225: 260x224 @ 59.541985Hz
TG Game Entry: https://www.twingalaxies.com/game/polaris-set-1/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=7790
Polaris (second revision)
-------------------------
Note: not currently represented at TG.
ROM set changed: yes. Added in 0.137u4.
0.106-0.137: NOT SUPPORTED
0.138-0.224: polaris - "Polaris (Latest version)"
0.225- : polarisa - "Polaris (second revision)"
Resolution, 0.138-0.225: 260x224 @ 59.541985Hz
Rules: [no current tracks]
Polaris (latest version)
------------------------
Note: not currently represented at TG.
ROM set changed: no. Added in 0.225.
0.106-0.224: NOT SUPPORTED
0.225- : polarisa - "Polaris (latest version)"
Resolution, 0.225- : 260x224 @ 59.541985Hz
Rules: [no current tracks]
polepos2
ROM set changed: no
0.106-0.149: polepos2 - "Pole Position II"
0.150-0.175: polepos2 - "Pole Position II (Japan)"
Resolution, 0.106-0.138: 256x224 @ 60.606060Hz
Resolution, 0.139-0.175: 256x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/scores....&gamename=Pole Position II
0.106-0.149: polepos2 - "Pole Position II"
0.150-0.175: polepos2 - "Pole Position II (Japan)"
Resolution, 0.106-0.138: 256x224 @ 60.606060Hz
Resolution, 0.139-0.175: 256x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/scores....&gamename=Pole Position II
poleposj, polepos
Note: two ROM sets represented here with changeover at 0.150·
MAME History:
- 0.150: Andrew Welburn, The Dumping Union added Pole Position (World). Verified the PP2-10.2H and some minor rom name corrections. Added DIP locations to the Pole Position sets [Brian Trona]. Changed 'Pole Position' to clone 'Pole Position (Japan)'. Renamed (polepos) to (poleposj), (polepos1) to (poleposa1) and (poleposa) to (poleposa2). Fixed rom names.
Pole Position (Japan)
---------------------
ROM set changed: yes
0.106-0.149: polepos - "Pole Position"
0.150-0.260: poleposj - "Pole Position (Japan)"
Resolution, 0.106-0.138: 256x224 @ 60.606060Hz
Resolution, 0.139-0.260: 256x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/game/pole-position/mame
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78931
Pole Position (World)
---------------------
Note: not currently represented on TG.
ROM set changed: no. Added in 0.150.
0.150-0.260: polepos - "Pole Position (World)"
Resolution, 0.150-0.260: 256x224 @ 60.606061Hz
Rules: [no current tracks]
Service Mode:
Typical Namco Pole Position hardware.
Service Mode reflects the local configuration after playback ends, not the recording. Service Mode is accessed by enabling the DIP Switch which can be toggled with the Service Mode Button (F2). A single settings screen is shown.
Default Settings:
MAME 0.106:
MAME 0.150:
- Despite the MAME History suggesting the DIP locations arrived in 0.150, they didn't appear until 0.158. - Barthax, Nov 2023.
MAME 0.158:
MAME 0.250:
From MAME 0.250 after entering service mode:
| 
MAME Notes:
- To reset the high score table, enter service mode, press the accelerator and change the shifter from LO to HI.
- Pole Position II reports 'Manual Start' on the Test Mode. This is ok, because they had to accommodate the hardware from Pole Position I to allow track selection.
MAME Bugs:
- polepos, poleposj, poleposa1, poleposa2: [possible] The game will appear to be temporarily stuck on a letter when entering initials. mmarino4 (ID 06577)
- Playback of inp incorrect after a while. reesal (ID 04429)
MAME History:
- 0.150: Andrew Welburn, The Dumping Union added Pole Position (World). Verified the PP2-10.2H and some minor rom name corrections. Added DIP locations to the Pole Position sets [Brian Trona]. Changed 'Pole Position' to clone 'Pole Position (Japan)'. Renamed (polepos) to (poleposj), (polepos1) to (poleposa1) and (poleposa) to (poleposa2). Fixed rom names.
Pole Position (Japan)
---------------------
ROM set changed: yes
0.106-0.149: polepos - "Pole Position"
0.150-0.260: poleposj - "Pole Position (Japan)"
Resolution, 0.106-0.138: 256x224 @ 60.606060Hz
Resolution, 0.139-0.260: 256x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/game/pole-position/mame
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78931
Pole Position (World)
---------------------
Note: not currently represented on TG.
ROM set changed: no. Added in 0.150.
0.150-0.260: polepos - "Pole Position (World)"
Resolution, 0.150-0.260: 256x224 @ 60.606061Hz
Rules: [no current tracks]
Service Mode:
Typical Namco Pole Position hardware.
Service Mode reflects the local configuration after playback ends, not the recording. Service Mode is accessed by enabling the DIP Switch which can be toggled with the Service Mode Button (F2). A single settings screen is shown.
Default Settings:
MAME 0.106:
MAME 0.150:
- Despite the MAME History suggesting the DIP locations arrived in 0.150, they didn't appear until 0.158. - Barthax, Nov 2023.
MAME 0.158:
MAME 0.250:
From MAME 0.250 after entering service mode:
MAME Notes:
- To reset the high score table, enter service mode, press the accelerator and change the shifter from LO to HI.
- Pole Position II reports 'Manual Start' on the Test Mode. This is ok, because they had to accommodate the hardware from Pole Position I to allow track selection.
MAME Bugs:
- polepos, poleposj, poleposa1, poleposa2: [possible] The game will appear to be temporarily stuck on a letter when entering initials. mmarino4 (ID 06577)
- Playback of inp incorrect after a while. reesal (ID 04429)
policetr13
ROM set changed: yes
0.106-0.175: policetr - "Police Trainer (Rev 1.3)"
0.222- : policetr13 - "Police Trainer (Rev 1.3)"
From MAMEINFO.DAT:
- 0.222: Brian Troha and The Dumping Union added Police Trainer (Rev 1.3B, Rev 0.3 PCB). Added 'Special Hardware Test' dipswitch. Changed description of clones (Rev 1.3B) to 'Police Trainer (Rev 1.3B, Rev 0.5B PCB)' and (Rev 1.3B Newer) to 'Police Trainer (Rev 1.3B Newer, Rev 0.5B PCB)'. Renamed (policetr) to (policetr13).
Resolution, 0.106-0.222: 394x240 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/po...er-rev-13/mame
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78936
NOTE: This game has both DIPs & internal settings covered by the rules. If not shown during playback, press F2 to access & check internal settings afterwards.
0.106-0.175: policetr - "Police Trainer (Rev 1.3)"
0.222- : policetr13 - "Police Trainer (Rev 1.3)"
From MAMEINFO.DAT:
- 0.222: Brian Troha and The Dumping Union added Police Trainer (Rev 1.3B, Rev 0.3 PCB). Added 'Special Hardware Test' dipswitch. Changed description of clones (Rev 1.3B) to 'Police Trainer (Rev 1.3B, Rev 0.5B PCB)' and (Rev 1.3B Newer) to 'Police Trainer (Rev 1.3B Newer, Rev 0.5B PCB)'. Renamed (policetr) to (policetr13).
Resolution, 0.106-0.222: 394x240 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/po...er-rev-13/mame
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78936
NOTE: This game has both DIPs & internal settings covered by the rules. If not shown during playback, press F2 to access & check internal settings afterwards.
policetr
Note: two ROM sets represented here with changeover at 0.222.
From MAMEINFO.DAT:
- 0.222: Brian Troha and The Dumping Union added Police Trainer (Rev 1.3B, Rev 0.3 PCB). Added 'Special Hardware Test' dipswitch. Changed description of clones (Rev 1.3B) to 'Police Trainer (Rev 1.3B, Rev 0.5B PCB)' and (Rev 1.3B Newer) to 'Police Trainer (Rev 1.3B Newer, Rev 0.5B PCB)'. Renamed (policetr) to (policetr13).
Police Trainer (Rev 1.3)
------------------------
ROM set changed: yes
0.106-0.175: policetr - "Police Trainer (Rev 1.3)"
0.222- : policetr13 - "Police Trainer (Rev 1.3)"
Resolution, 0.106-0.222: 394x240 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/po...er-rev-13/mame
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78936
NOTE: This game has both DIPs & internal settings covered by the rules. If not shown during playback, press F2 to access & check internal settings afterwards.
Police Trainer (Rev 1.3B, Rev 0.3 PCB)
--------------------------------------
Note: not currently represented on TG.
ROM set changed: no. Added in 0.222.
0.222- : policetr - "Police Trainer (Rev 1.3B, Rev 0.3 PCB)"
Resolution, 0.222- : 394x240 @ 60.000000Hz
Rules: [no current tracks]
From MAMEINFO.DAT:
- 0.222: Brian Troha and The Dumping Union added Police Trainer (Rev 1.3B, Rev 0.3 PCB). Added 'Special Hardware Test' dipswitch. Changed description of clones (Rev 1.3B) to 'Police Trainer (Rev 1.3B, Rev 0.5B PCB)' and (Rev 1.3B Newer) to 'Police Trainer (Rev 1.3B Newer, Rev 0.5B PCB)'. Renamed (policetr) to (policetr13).
Police Trainer (Rev 1.3)
------------------------
ROM set changed: yes
0.106-0.175: policetr - "Police Trainer (Rev 1.3)"
0.222- : policetr13 - "Police Trainer (Rev 1.3)"
Resolution, 0.106-0.222: 394x240 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/po...er-rev-13/mame
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78936
NOTE: This game has both DIPs & internal settings covered by the rules. If not shown during playback, press F2 to access & check internal settings afterwards.
Police Trainer (Rev 1.3B, Rev 0.3 PCB)
--------------------------------------
Note: not currently represented on TG.
ROM set changed: no. Added in 0.222.
0.222- : policetr - "Police Trainer (Rev 1.3B, Rev 0.3 PCB)"
Resolution, 0.222- : 394x240 @ 60.000000Hz
Rules: [no current tracks]
pollux
ROM set changed: no
0.106-0.255: pollux - "Pollux (set 1)"
Resolution, 0.106-0.255: 384x240 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/pollux-set-1/mame/
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78937
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78938
Service Mode
Typical Dooyong-style hardware (twin Z80 & 68000+Z80).
Service Mode reflects the local configuration after playback ends, not the recording. Service Mode is accessed by enabling the Service Mode DIP switch or via Service button (9) which toggles the DIP switch with each use. A reset must be used to enter Service Mode and therefore cannot be recorded in an INP. A single screen combined screen of input test and configuration is shown.
Default Settings:
MAME 0.106:
MAME 0.250:
From MAME 0.250 after entering service mode:
| 
0.106-0.255: pollux - "Pollux (set 1)"
Resolution, 0.106-0.255: 384x240 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/pollux-set-1/mame/
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78937
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78938
Service Mode
Typical Dooyong-style hardware (twin Z80 & 68000+Z80).
Service Mode reflects the local configuration after playback ends, not the recording. Service Mode is accessed by enabling the Service Mode DIP switch or via Service button (9) which toggles the DIP switch with each use. A reset must be used to enter Service Mode and therefore cannot be recorded in an INP. A single screen combined screen of input test and configuration is shown.
Default Settings:
MAME 0.106:
MAME 0.250:
From MAME 0.250 after entering service mode:
polyplay
ROM set changed: no
0.106-0.175: polyplay - "Poly-Play"
Resolution, 0.106-0.175: 512x256 @ 50.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....name=Poly-Play
Rules, Abfahrtslauf [Downhill Skiing] [Punkte]: https://www.twingalaxies.com/scores.php?scores=78939
Rules, Merkspiel [Memory Match] - [Punkte]: https://www.twingalaxies.com/scores.php?scores=78942
Rules, Schmetterlinge [Butterflies] - [Punkte]: https://www.twingalaxies.com/scores.php?scores=78944
Rules, Hase Und Wolf [Rabbit and Wolf] - [Punkte]: https://www.twingalaxies.com/scores.php?scores=78940
Rules, Hirschjagd [Deer Hunting] - [Treffer]: https://www.twingalaxies.com/scores.php?scores=78941
Rules, Schiessbude [Shooting] - [Punkte]: https://www.twingalaxies.com/scores.php?scores=78943
Rules, Wasserrohrbruch [Water Pipe] - [Punkte]: https://www.twingalaxies.com/scores.php?scores=78945
0.106-0.175: polyplay - "Poly-Play"
Resolution, 0.106-0.175: 512x256 @ 50.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....name=Poly-Play
Rules, Abfahrtslauf [Downhill Skiing] [Punkte]: https://www.twingalaxies.com/scores.php?scores=78939
Rules, Merkspiel [Memory Match] - [Punkte]: https://www.twingalaxies.com/scores.php?scores=78942
Rules, Schmetterlinge [Butterflies] - [Punkte]: https://www.twingalaxies.com/scores.php?scores=78944
Rules, Hase Und Wolf [Rabbit and Wolf] - [Punkte]: https://www.twingalaxies.com/scores.php?scores=78940
Rules, Hirschjagd [Deer Hunting] - [Treffer]: https://www.twingalaxies.com/scores.php?scores=78941
Rules, Schiessbude [Shooting] - [Punkte]: https://www.twingalaxies.com/scores.php?scores=78943
Rules, Wasserrohrbruch [Water Pipe] - [Punkte]: https://www.twingalaxies.com/scores.php?scores=78945
ponpoko
ROM set changed: no
0.106-0.197: ponpoko - "Ponpoko"
Resolution, 0.106-0.113: 288x224 @ 60.606060Hz
Resolution, 0.114-0.197: 288x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/game/ponpoko/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=9813
0.106-0.197: ponpoko - "Ponpoko"
Resolution, 0.106-0.113: 288x224 @ 60.606060Hz
Resolution, 0.114-0.197: 288x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/game/ponpoko/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=9813
poolshrk
ROM set changed: no
0.106-0.250: poolshrk - "Poolshark"
Resolution, 0.106-0.250: 255x232 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/poolshark/mame/
Points: https://www.twingalaxies.com/scores.php?scores=78946
Service Mode:
Service Mode is accessed with the Service button (F2) and goes through four tests. No settings are present or configurable in Service Mode.
0.106-0.250: poolshrk - "Poolshark"
Resolution, 0.106-0.250: 255x232 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/poolshark/mame/
Points: https://www.twingalaxies.com/scores.php?scores=78946
Service Mode:
Service Mode is accessed with the Service button (F2) and goes through four tests. No settings are present or configurable in Service Mode.
pooyan
ROM set changed: no
0.106-0.213: pooyan - "Pooyan"
Resolution, 0.106-0.213: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/pooyan/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=7791
0.106-0.213: pooyan - "Pooyan"
Resolution, 0.106-0.213: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/pooyan/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=7791
popbounc
ROM set changed: no
0.106-0.260: popbounc - "Pop 'n Bounce / Gapporin"
MAME History:
- 0.113u2: Zsolt Vasvari updated NeoGeo driver to the new video timing code and screen raw parameters, this fixes also the messed up graphics. Changed VSync to 59.185606 Hz.
- 0.129u3: Fabio Priuli added missing HARDDIP settings in 'STANDARD_DIPS' for DIP's 4,5 and 6 ("COMM Setting"). Added dipswitches 'COMM Setting (Cabinet No.)' and 'COMM Setting (Link Enable)'.
- 0.143u1: Fixed rom names. Changed description to 'Sengoku / Sengoku Denshou (NGM-017)(NGH-017)' and clone (set 2) to 'Sengoku / Sengoku Denshou (NGH-017)(US)'.
- 0.150: Endian fix for kof2003 protection (machine\neocrypt.c and neoprot.c). Fixed NeoGeo memory leak, clean up inputs a bit [Alex Jackson]. Changed 'Test Switch' dipswitch to 'Service Mode'.
- 0.151: [- snip -] [Alex Jackson]. Added coin slots 3 and 4. Added dipswitches 'Setting Mode', 'Cabinet' and 'Controller'.
Resolution, 0.106-0.113: 320x224 @ 59.185608Hz
Resolution, 0.114-0.260: 320x224 @ 59.185606Hz
TG Game Entry: https://www.twingalaxies.com/scores....nce+/+Gapporin
Rules, Points: https://www.twingalaxies.com/scores.php?scores=15387
Service Mode:
Standard SNK NeoGeo BIOS.
All relevant rules are covered by internal settings. If not shown during playback, use F2 to access after playback completed. Navigation is with P1 Up & Down. Select menu option with P1 Button 1 and sub-menus can be exited with P1 Button 3. P1 Button 1 and P1 Button 2 adjust individual configuration options.
Default Settings:
MAME 0.106 DIP Switches:
MAME 0.130 DIP Switches:
MAME 0.150 DIP Switches:
MAME 0.151 DIP Switches:
MAME 0.250 DIP Switches:
|
MAME 0.250 BIOS:
Cartridge:
| 
MAME Note:
- To use a Paddle, enable it in test mode, the default is joystick not paddle.
0.106-0.260: popbounc - "Pop 'n Bounce / Gapporin"
MAME History:
- 0.113u2: Zsolt Vasvari updated NeoGeo driver to the new video timing code and screen raw parameters, this fixes also the messed up graphics. Changed VSync to 59.185606 Hz.
- 0.129u3: Fabio Priuli added missing HARDDIP settings in 'STANDARD_DIPS' for DIP's 4,5 and 6 ("COMM Setting"). Added dipswitches 'COMM Setting (Cabinet No.)' and 'COMM Setting (Link Enable)'.
- 0.143u1: Fixed rom names. Changed description to 'Sengoku / Sengoku Denshou (NGM-017)(NGH-017)' and clone (set 2) to 'Sengoku / Sengoku Denshou (NGH-017)(US)'.
- 0.150: Endian fix for kof2003 protection (machine\neocrypt.c and neoprot.c). Fixed NeoGeo memory leak, clean up inputs a bit [Alex Jackson]. Changed 'Test Switch' dipswitch to 'Service Mode'.
- 0.151: [- snip -] [Alex Jackson]. Added coin slots 3 and 4. Added dipswitches 'Setting Mode', 'Cabinet' and 'Controller'.
Resolution, 0.106-0.113: 320x224 @ 59.185608Hz
Resolution, 0.114-0.260: 320x224 @ 59.185606Hz
TG Game Entry: https://www.twingalaxies.com/scores....nce+/+Gapporin
Rules, Points: https://www.twingalaxies.com/scores.php?scores=15387
Service Mode:
Standard SNK NeoGeo BIOS.
All relevant rules are covered by internal settings. If not shown during playback, use F2 to access after playback completed. Navigation is with P1 Up & Down. Select menu option with P1 Button 1 and sub-menus can be exited with P1 Button 3. P1 Button 1 and P1 Button 2 adjust individual configuration options.
Default Settings:
MAME 0.106 DIP Switches:
MAME 0.130 DIP Switches:
MAME 0.150 DIP Switches:
MAME 0.151 DIP Switches:
MAME 0.250 DIP Switches:
MAME 0.250 BIOS:
Cartridge:
MAME Note:
- To use a Paddle, enable it in test mode, the default is joystick not paddle.
popeye
ROM set changed: no
0.33b1-0.254: popeye - "Popeye (revision D)"
Resolution, 0.106-0.254: 512x448 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/po...vision-d/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=7792
0.33b1-0.254: popeye - "Popeye (revision D)"
Resolution, 0.106-0.254: 512x448 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/po...vision-d/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=7792
popflame
ROM set changed: no
0.106-0.175: popflame - "Pop Flamer (protected)"
Resolution, 0.106-0.175: 288x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....6&gamename=Pop Flamer [protected]
0.106-0.175: popflame - "Pop Flamer (protected)"
Resolution, 0.106-0.175: 288x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....6&gamename=Pop Flamer [protected]
popnpop
ROM set changed: no
0.106-0.255: popnpop - "Pop'n Pop (Ver 2.07O 1998/02/09)"
MAME History:
- 0.113u2: Changed VSync to 58.970000 Hz.
Resolution, 0.106-0.113: 320x232 @ 58.970001Hz
Resolution, 0.114-0.255: 320x232 @ 58.970000Hz
TG Game Entry: https://www.twingalaxies.com/game/po...98-02-09/mame/
Rules, Points [Puzzle Mode, Hard Difficulty, Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78949
Rules, Points [Puzzle Mode, VS Cpu Mode, Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78951
Rules, Points [Puzzle Mode, Normal Difficulty, Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78948
Rules, Points [Puzzle Mode, Hard Difficulty, Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78950
Service Mode:
Typical Taito F3 BIOS.
All relevant rules are covered by internal settings. Service Mode can be accessed using the Service button (F2). Navigate with P1 Up and Down. Select menu options with P1 Button 1. Change settings with P1 Left and Right.
Default Settings:
0.106-0.255: popnpop - "Pop'n Pop (Ver 2.07O 1998/02/09)"
MAME History:
- 0.113u2: Changed VSync to 58.970000 Hz.
Resolution, 0.106-0.113: 320x232 @ 58.970001Hz
Resolution, 0.114-0.255: 320x232 @ 58.970000Hz
TG Game Entry: https://www.twingalaxies.com/game/po...98-02-09/mame/
Rules, Points [Puzzle Mode, Hard Difficulty, Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78949
Rules, Points [Puzzle Mode, VS Cpu Mode, Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78951
Rules, Points [Puzzle Mode, Normal Difficulty, Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78948
Rules, Points [Puzzle Mode, Hard Difficulty, Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78950
Service Mode:
Typical Taito F3 BIOS.
All relevant rules are covered by internal settings. Service Mode can be accessed using the Service button (F2). Navigate with P1 Up and Down. Select menu options with P1 Button 1. Change settings with P1 Left and Right.
Default Settings:
popper
ROM set changed: no
0.106-0.175: popper - "Popper"
Resolution, 0.106-0.175: 264x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....amename=Popper
0.106-0.175: popper - "Popper"
Resolution, 0.106-0.175: 264x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....amename=Popper
porky
ROM set changed: no
0.106-0.193: porky - "Porky"
Resolution, 0.106-0.113: 256x224 @ 60.606060Hz
Resolution, 0.114-0.193: 256x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/porky/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78952
0.106-0.193: porky - "Porky"
Resolution, 0.106-0.113: 256x224 @ 60.606060Hz
Resolution, 0.114-0.193: 256x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/porky/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78952
portrait
ROM set changed: no
0.106-0.175: portrait - "Portraits (set 1)"
Resolution, 0.106-0.175: 432x320 @ 50.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....name=Portraits [Set 1]
0.106-0.175: portrait - "Portraits (set 1)"
Resolution, 0.106-0.175: 432x320 @ 50.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....name=Portraits [Set 1]
potopoto
ROM set changed: no
0.106-0.170: potopoto - "Poto Poto (Japan)"
0.171-0.175: potopoto - "Poto Poto (Japan, Rev A)"
MAME History:
- 0.171: Confirmed on a PCB that Poto Poto is rev A [David Haywood]. Changed description to 'Poto Poto (Japan, Rev A)'.
Resolution, 0.106-0.127: 320x224 @ 60.000000Hz
Resolution, 0.128-0.175: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....&gamename=Poto Poto [Japan]
0.106-0.170: potopoto - "Poto Poto (Japan)"
0.171-0.175: potopoto - "Poto Poto (Japan, Rev A)"
MAME History:
- 0.171: Confirmed on a PCB that Poto Poto is rev A [David Haywood]. Changed description to 'Poto Poto (Japan, Rev A)'.
Resolution, 0.106-0.127: 320x224 @ 60.000000Hz
Resolution, 0.128-0.175: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....&gamename=Poto Poto [Japan]
poundfor
ROM set changed: no
0.106-0.175: poundfor - "Pound for Pound (World)"
Resolution, 0.106-0.122: 384x256 @ 55.000000Hz
Resolution, 0.123-0.175: 384x256 @ 55.017606Hz
TG Game Entry: https://www.twingalaxies.com/scores....gamename=Pound for Pound [World]
0.106-0.175: poundfor - "Pound for Pound (World)"
Resolution, 0.106-0.122: 384x256 @ 55.000000Hz
Resolution, 0.123-0.175: 384x256 @ 55.017606Hz
TG Game Entry: https://www.twingalaxies.com/scores....gamename=Pound for Pound [World]
powerbal
ROM set changed: no
0.106-0.175: powerbal - "Power Balls"
Resolution, 0.106-0.175: 320x240 @ 61.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....gamename=Power Balls
0.106-0.175: powerbal - "Power Balls"
Resolution, 0.106-0.175: 320x240 @ 61.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....gamename=Power Balls
powerdrv
ROM set changed: no
0.106-0.175: powerdrv - "Power Drive"
Resolution, 0.106-0.175: 512x480 @ 30.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....gamename=Power Drive
0.106-0.175: powerdrv - "Power Drive"
Resolution, 0.106-0.175: 512x480 @ 30.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....gamename=Power Drive
powerinj
ROM set changed: yes
0.106-0.128: powerins - "Gouketsuji Ichizoku (Japan)"
0.128u2-0.133: powerinj - "Gouketsuji Ichizoku (Japan)"
0.133u1-0.175: powerinsj - "Gouketsuji Ichizoku (Japan)"
MAME History:
- 0.128u2: Jim Hernandez added Power Instinct (USA). Renamed (powerins) to (powerinj).
- 0.133u1: Renamed (powerinj) to (powerinsj), (powerina) to (powerinsa) and (powerinb) to (powerinsb).
Resolution, 0.106-0.133: 320x224 @ 56.000000Hz
Resolution, 0.134-0.175: 320x224 @ 56.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....%20Ichizoku%20[Japan]
Rules, Points [Tournament Settings]: https://www.twingalaxies.com/scores.php?scores=70540
0.106-0.128: powerins - "Gouketsuji Ichizoku (Japan)"
0.128u2-0.133: powerinj - "Gouketsuji Ichizoku (Japan)"
0.133u1-0.175: powerinsj - "Gouketsuji Ichizoku (Japan)"
MAME History:
- 0.128u2: Jim Hernandez added Power Instinct (USA). Renamed (powerins) to (powerinj).
- 0.133u1: Renamed (powerinj) to (powerinsj), (powerina) to (powerinsa) and (powerinb) to (powerinsb).
Resolution, 0.106-0.133: 320x224 @ 56.000000Hz
Resolution, 0.134-0.175: 320x224 @ 56.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....%20Ichizoku%20[Japan]
Rules, Points [Tournament Settings]: https://www.twingalaxies.com/scores.php?scores=70540
powerinsj
ROM set changed: yes
0.106-0.128: powerins - "Gouketsuji Ichizoku (Japan)"
0.128u2-0.133: powerinj - "Gouketsuji Ichizoku (Japan)"
0.133u1-0.175: powerinsj - "Gouketsuji Ichizoku (Japan)"
MAME History:
- 0.128u2: Jim Hernandez added Power Instinct (USA). Renamed (powerins) to (powerinj).
- 0.133u1: Renamed (powerinj) to (powerinsj), (powerina) to (powerinsa) and (powerinb) to (powerinsb).
Resolution, 0.106-0.133: 320x224 @ 56.000000Hz
Resolution, 0.134-0.175: 320x224 @ 56.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....%20Ichizoku%20[Japan]
Rules, Points [Tournament Settings]: https://www.twingalaxies.com/scores.php?scores=70540
0.106-0.128: powerins - "Gouketsuji Ichizoku (Japan)"
0.128u2-0.133: powerinj - "Gouketsuji Ichizoku (Japan)"
0.133u1-0.175: powerinsj - "Gouketsuji Ichizoku (Japan)"
MAME History:
- 0.128u2: Jim Hernandez added Power Instinct (USA). Renamed (powerins) to (powerinj).
- 0.133u1: Renamed (powerinj) to (powerinsj), (powerina) to (powerinsa) and (powerinb) to (powerinsb).
Resolution, 0.106-0.133: 320x224 @ 56.000000Hz
Resolution, 0.134-0.175: 320x224 @ 56.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....%20Ichizoku%20[Japan]
Rules, Points [Tournament Settings]: https://www.twingalaxies.com/scores.php?scores=70540
powerins
Note: two ROM sets represented here with changeover at 0.128u2.
MAME History:
- 0.128u2: Jim Hernandez added Power Instinct (USA). Renamed (powerins) to (powerinj).
- 0.133u1: Renamed (powerinj) to (powerinsj), (powerina) to (powerinsa) and (powerinb) to (powerinsb).
Gouketsuji Ichizoku (Japan)
---------------------------
ROM set changed: yes
0.106-0.128: powerins - "Gouketsuji Ichizoku (Japan)"
0.128u2-0.133: powerinj - "Gouketsuji Ichizoku (Japan)"
0.133u1-0.175: powerinsj - "Gouketsuji Ichizoku (Japan)"
Resolution, 0.106-0.133: 320x224 @ 56.000000Hz
Resolution, 0.134-0.175: 320x224 @ 56.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....%20Ichizoku%20[Japan]
Rules, Points [Tournament Settings]: https://www.twingalaxies.com/scores.php?scores=70540
Power Instinct (USA)
--------------------
Note: not currently represented at TG.
ROM set changed: no. Added in 0.128u2.
0.128u2-0.175: powerins - "Power Instinct (USA)"
Resolution, 0.128-0.175: 320x224 @ 56.000000Hz
Rules: [no current tracks]
MAME History:
- 0.128u2: Jim Hernandez added Power Instinct (USA). Renamed (powerins) to (powerinj).
- 0.133u1: Renamed (powerinj) to (powerinsj), (powerina) to (powerinsa) and (powerinb) to (powerinsb).
Gouketsuji Ichizoku (Japan)
---------------------------
ROM set changed: yes
0.106-0.128: powerins - "Gouketsuji Ichizoku (Japan)"
0.128u2-0.133: powerinj - "Gouketsuji Ichizoku (Japan)"
0.133u1-0.175: powerinsj - "Gouketsuji Ichizoku (Japan)"
Resolution, 0.106-0.133: 320x224 @ 56.000000Hz
Resolution, 0.134-0.175: 320x224 @ 56.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....%20Ichizoku%20[Japan]
Rules, Points [Tournament Settings]: https://www.twingalaxies.com/scores.php?scores=70540
Power Instinct (USA)
--------------------
Note: not currently represented at TG.
ROM set changed: no. Added in 0.128u2.
0.128u2-0.175: powerins - "Power Instinct (USA)"
Resolution, 0.128-0.175: 320x224 @ 56.000000Hz
Rules: [no current tracks]
powrplay
ROM set changed: no
0.106-0.175: powrplay - "Power Play"
Resolution, 0.106-0.175: 320x240 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....gamename=Power Play
0.106-0.175: powrplay - "Power Play"
Resolution, 0.106-0.175: 320x240 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....gamename=Power Play
pow
ROM set changed: no
0.106-0.124: pow - "P.O.W. - Prisoners of War (US)"
0.125-0.255: pow - "P.O.W. - Prisoners of War (US version 1)"
MAME History:
- 0.125: Fixed rom names. Changed description to 'P.O.W. - Prisoners of War (US version 1)'.
- 0.126u1: Nicola Salmoria fixed large pillar, which pops up too late at 3/4 of the 1st level. Fixed gfx2 rom loading. Changed 68000 CPU1 clock speed to 9MHz and VSync to 59.185606 Hz.
Resolution, 0.106-0.126: 256x224 @ 60.000000Hz
Resolution, 0.127-0.255: 256x224 @ 59.185606Hz
TG Game Entry: https://www.twingalaxies.com/game/po...f-war-us/mame/
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78863
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78864
Service Mode:
Typical SNK "Prisoners of War"-style hardware/BIOS.
Service Mode reflects the local configuration after playback ends, not the recording. Service Mode is accessed by enabling the DIP Switch which can be toggled with the Service Mode Button (F2) followed by a reset thus cannot be recorded in an INP. A cycle of test screens are progressed through with simultaneous use of P1 Start and P2 Start to navigate. DIP switches are shown in read-only binary form on both the DIP Mode screen and the Lever test screen.
Default Settings:
From MAME 0.250 after entering service mode:
| 
| 
MAME Bug:
- P.O.W Prisoners of War (US version1) game play freeze. xll (ID 08098)
0.106-0.124: pow - "P.O.W. - Prisoners of War (US)"
0.125-0.255: pow - "P.O.W. - Prisoners of War (US version 1)"
MAME History:
- 0.125: Fixed rom names. Changed description to 'P.O.W. - Prisoners of War (US version 1)'.
- 0.126u1: Nicola Salmoria fixed large pillar, which pops up too late at 3/4 of the 1st level. Fixed gfx2 rom loading. Changed 68000 CPU1 clock speed to 9MHz and VSync to 59.185606 Hz.
Resolution, 0.106-0.126: 256x224 @ 60.000000Hz
Resolution, 0.127-0.255: 256x224 @ 59.185606Hz
TG Game Entry: https://www.twingalaxies.com/game/po...f-war-us/mame/
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78863
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78864
Service Mode:
Typical SNK "Prisoners of War"-style hardware/BIOS.
Service Mode reflects the local configuration after playback ends, not the recording. Service Mode is accessed by enabling the DIP Switch which can be toggled with the Service Mode Button (F2) followed by a reset thus cannot be recorded in an INP. A cycle of test screens are progressed through with simultaneous use of P1 Start and P2 Start to navigate. DIP switches are shown in read-only binary form on both the DIP Mode screen and the Lever test screen.
Default Settings:
From MAME 0.250 after entering service mode:
MAME Bug:
- P.O.W Prisoners of War (US version1) game play freeze. xll (ID 08098)
powyak96
ROM set changed: yes
0.106-0.148: pbball96 - "Powerful Baseball '96 (GV017 Japan 1.03)"
0.148u5-0.208: powyak96 - "Jikkyou Powerful Pro Yakyuu '96 (GV017 Japan 1.03)"
From MAMEINFO.DAT:
- 0.148u5: Fabio Priuli changed description to 'Jikkyou Powerful Pro Yakyuu '96 (GV017 Japan 1.03)'. Renamed (pbball96) to (powyak96).
Resolution, 0.106-0.208: 640x480 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/po...apan-103/mame/
Rules, Biggest Blowout: https://www.twingalaxies.com/scores.php?scores=78966
NOTE: All relevant rules are covered by internal settings. If not shown during playback, use F2 to access after playback completed.
0.106-0.148: pbball96 - "Powerful Baseball '96 (GV017 Japan 1.03)"
0.148u5-0.208: powyak96 - "Jikkyou Powerful Pro Yakyuu '96 (GV017 Japan 1.03)"
From MAMEINFO.DAT:
- 0.148u5: Fabio Priuli changed description to 'Jikkyou Powerful Pro Yakyuu '96 (GV017 Japan 1.03)'. Renamed (pbball96) to (powyak96).
Resolution, 0.106-0.208: 640x480 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/po...apan-103/mame/
Rules, Biggest Blowout: https://www.twingalaxies.com/scores.php?scores=78966
NOTE: All relevant rules are covered by internal settings. If not shown during playback, use F2 to access after playback completed.
ppmast93
ROM set changed: no
0.106-0.175: ppmast93 - "Ping Pong Masters '93"
Resolution, 0.106-0.175: 256x256 @ 55.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....&gamename=Ping Pong Masters '93
0.106-0.175: ppmast93 - "Ping Pong Masters '93"
Resolution, 0.106-0.175: 256x256 @ 55.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....&gamename=Ping Pong Masters '93
prehisle
ROM set changed: no
0.106-0.255: prehisle - "Prehistoric Isle in 1930 (World)"
MAME History:
- 0.141u1: Brian Troha added DIP locations to Prehistoric Isle in 1930.
- 0.166: Mamesick fixed wrong speed in Prehistoric Isle and clones (see MT05939). Changed VSync to 59.185606 Hz. Note: This is a guesswork but in any case it's better than use a standard refresh rate of 60.00 Hz. Values are taken from SNK68 driver which contains games with very similar (if not identical) hardware to prehisle. Notice that the new refresh rate is identical to NeoGeo and this should not be a surprise since we're talking about SNK manufacturer.
Resolution, 0.106-0.165: 256x224 @ 60.000000Hz
Resolution, 0.166-0.255: 256x224 @ 59.185606Hz
TG Game Entry: https://www.twingalaxies.com/game/pr...30-world/mame/
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78968
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78969
Service Mode:
No service mode.
Default Settings:
0.106-0.255: prehisle - "Prehistoric Isle in 1930 (World)"
MAME History:
- 0.141u1: Brian Troha added DIP locations to Prehistoric Isle in 1930.
- 0.166: Mamesick fixed wrong speed in Prehistoric Isle and clones (see MT05939). Changed VSync to 59.185606 Hz. Note: This is a guesswork but in any case it's better than use a standard refresh rate of 60.00 Hz. Values are taken from SNK68 driver which contains games with very similar (if not identical) hardware to prehisle. Notice that the new refresh rate is identical to NeoGeo and this should not be a surprise since we're talking about SNK manufacturer.
Resolution, 0.106-0.165: 256x224 @ 60.000000Hz
Resolution, 0.166-0.255: 256x224 @ 59.185606Hz
TG Game Entry: https://www.twingalaxies.com/game/pr...30-world/mame/
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78968
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78969
Service Mode:
No service mode.
Default Settings:
preisle2
ROM set changed: no
0.106-0.260: preisle2 - "Prehistoric Isle 2"
MAME History:
- 0.113u2: Zsolt Vasvari updated NeoGeo driver to the new video timing code and screen raw parameters, this fixes also the messed up graphics. Changed VSync to 59.185606 Hz.
- 0.129u3: Fabio Priuli added missing HARDDIP settings in 'STANDARD_DIPS' for DIP's 4,5 and 6 ("COMM Setting"). Added dipswitches 'COMM Setting (Cabinet No.)' and 'COMM Setting (Link Enable)'.
- 0.150: Endian fix for kof2003 protection (machine\neocrypt.c and neoprot.c). Fixed NeoGeo memory leak, clean up inputs a bit [Alex Jackson]. Changed 'Test Switch' dipswitch to 'Service Mode'.
- 0.151: [- snip -] [Alex Jackson]. Added coin slots 3 and 4. Added dipswitches 'Setting Mode', 'Cabinet' and 'Controller'.
Resolution, 0.106-0.113: 320x224 @ 59.185608Hz
Resolution, 0.114-0.260: 320x224 @ 59.185606Hz
TG Game Entry: https://www.twingalaxies.com/game/pr...c-isle-2/mame/
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=15388
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=15389
Service Mode:
Standard SNK NeoGeo BIOS.
All relevant rules are covered by internal settings. If not shown during playback, use F2 to access after playback completed. Navigation is with P1 Up & Down. Select menu option with P1 Button 1 and sub-menus can be exited with P1 Button 3. P1 Button 1 and P1 Button 2 adjust individual configuration options.
Default Settings:
MAME 0.106 DIP Switches:
MAME 0.130 DIP Switches:
MAME 0.150 DIP Switches:
MAME 0.151 DIP Switches:
MAME 0.250 DIP Switches:
|
MAME 0.250 BIOS:
Cartridge:
| 
0.106-0.260: preisle2 - "Prehistoric Isle 2"
MAME History:
- 0.113u2: Zsolt Vasvari updated NeoGeo driver to the new video timing code and screen raw parameters, this fixes also the messed up graphics. Changed VSync to 59.185606 Hz.
- 0.129u3: Fabio Priuli added missing HARDDIP settings in 'STANDARD_DIPS' for DIP's 4,5 and 6 ("COMM Setting"). Added dipswitches 'COMM Setting (Cabinet No.)' and 'COMM Setting (Link Enable)'.
- 0.150: Endian fix for kof2003 protection (machine\neocrypt.c and neoprot.c). Fixed NeoGeo memory leak, clean up inputs a bit [Alex Jackson]. Changed 'Test Switch' dipswitch to 'Service Mode'.
- 0.151: [- snip -] [Alex Jackson]. Added coin slots 3 and 4. Added dipswitches 'Setting Mode', 'Cabinet' and 'Controller'.
Resolution, 0.106-0.113: 320x224 @ 59.185608Hz
Resolution, 0.114-0.260: 320x224 @ 59.185606Hz
TG Game Entry: https://www.twingalaxies.com/game/pr...c-isle-2/mame/
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=15388
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=15389
Service Mode:
Standard SNK NeoGeo BIOS.
All relevant rules are covered by internal settings. If not shown during playback, use F2 to access after playback completed. Navigation is with P1 Up & Down. Select menu option with P1 Button 1 and sub-menus can be exited with P1 Button 3. P1 Button 1 and P1 Button 2 adjust individual configuration options.
Default Settings:
MAME 0.106 DIP Switches:
MAME 0.130 DIP Switches:
MAME 0.150 DIP Switches:
MAME 0.151 DIP Switches:
MAME 0.250 DIP Switches:
MAME 0.250 BIOS:
Cartridge:
prikura
ROM set changed: no
0.106-0.255: prikura - "Princess Clara Daisakusen (J 960910 V1.000)"
MAME History:
- 0.131u3: Added dipswitches 'UNK' and 7x 'Unknown'.
- 0.133u1: Angelo Salese added screen raw parameters hook-up to the ST-V driver, fixes some of the current issues. Angelo Salese and Corrado Tomaselli hand-tuned ST-V pixel-clock to match measured fps from the PCB. Corrado Tomaselli verified and updated the vertical syncs on the ST-V motherboard. Changed visible area to 320x224 and VSync to 59.828244Hz.
- 0.142u5: More accurate pixel clocks for Sega Saturn / ST-V [Angelo Salese]. Angelo Salese fixed an ST-V window effect bug when it's in double interlace mode, fixes a graphic bug with Virtual Mahjong. Fixed a rather silly bug with SCU DSP execute flag. Oliver Stoeneberg fixed Sega Saturn / ST-V start-up crash that was happening on some ends. Added accurate hblank durations to Sega Saturn / ST-V HW [Angelo Salese, Corrado Tomaselli, Charles MacDonald]. Angelo Salese moved SMPC intback command inside a timer, removes a kludge for SMPC mask irq. Angelo Salese fixed emulation hangs in Pebble Beach and Funky Head Boxers. Fixed a rather silly bug with SCU DSP execute flag. Moved SMPC intback command inside a timer, removes a kludge for SMPC mask irq. Added CD/DA audio and changed VSync to 59.826048 Hz.
- 0.143: Changed SH-2 CPU1/2 clock speed to 28636360 Hz, 68000 CPU3 to 11289600 Hz and VSync to 59.764793 Hz.
- 0.180: Added audio\rax.cpp/h. Emulated the Acclaim RAX sound board, fixing sound in Batman Forever [Phil Bennett]. Worked around VDP1 timings in Sega Saturn, fixes regression with (MESS) Batman Forever gameplay speed (video\stvvdp1.cpp). Added Rotation Parameter read control register, fixes at least Riddler stage ROZ positioning in Batman Forever (video\stvvdp2.cpp) [Angelo Salese]. Changed the SH2 disassemblers to use 'std::ostream &' internally [AJR]. Changed visible area to 352x224.
- 0.214: Added machine\segabill.cpp/h, layout\segabill.lay and layout\segabillv.lay. Emulated the Sega Billboard and hook it up to the STV driver. It's not shown by default. To view it, choose the layout view 'Billboard'. YouTube: https://youtu.be/csuOJBU5rzo [biggestsonicfan, Dirk Best]. Added Z80 (8MHz) CPU5. Added dipswitches 'Test Winner LED P1/2', 'Test 7-Segment P1/2', 'Demo', 'Testmode' and 2x 'Unknown'.
Resolution, 0.106-0.128: 704x513 @ 60.000000Hz
Resolution, 0.129-0.133: 704x512 @ 60.000000Hz
Resolution, 0.134-0.142: 320x224 @ 59.828244Hz
Resolution, 0.143-0.179: 320x224 @ 59.764793Hz
Resolution, 0.180-0.193: 352x224 @ 59.764793Hz
Resolution, 0.194-0.255: 352x224 @ 59.764802Hz
TG Game Entry: https://www.twingalaxies.com/game/pr...10-v1000/mame/
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78975
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78976
Service Mode:
Standard Sega ST-V BIOS.
Service Mode is accessed with the Service Button (F2). Navigation is with the Test (9) button and selection is with the Service Button. Each cartridge has a separate interface from the ST-V BIOS and its own navigation changes with the cart implementation: instructions on screen.
Default Settings:
MAME 0.106:
MAME 0.250:
STV BIOS: |
Cart Settings:
0.106-0.255: prikura - "Princess Clara Daisakusen (J 960910 V1.000)"
MAME History:
- 0.131u3: Added dipswitches 'UNK' and 7x 'Unknown'.
- 0.133u1: Angelo Salese added screen raw parameters hook-up to the ST-V driver, fixes some of the current issues. Angelo Salese and Corrado Tomaselli hand-tuned ST-V pixel-clock to match measured fps from the PCB. Corrado Tomaselli verified and updated the vertical syncs on the ST-V motherboard. Changed visible area to 320x224 and VSync to 59.828244Hz.
- 0.142u5: More accurate pixel clocks for Sega Saturn / ST-V [Angelo Salese]. Angelo Salese fixed an ST-V window effect bug when it's in double interlace mode, fixes a graphic bug with Virtual Mahjong. Fixed a rather silly bug with SCU DSP execute flag. Oliver Stoeneberg fixed Sega Saturn / ST-V start-up crash that was happening on some ends. Added accurate hblank durations to Sega Saturn / ST-V HW [Angelo Salese, Corrado Tomaselli, Charles MacDonald]. Angelo Salese moved SMPC intback command inside a timer, removes a kludge for SMPC mask irq. Angelo Salese fixed emulation hangs in Pebble Beach and Funky Head Boxers. Fixed a rather silly bug with SCU DSP execute flag. Moved SMPC intback command inside a timer, removes a kludge for SMPC mask irq. Added CD/DA audio and changed VSync to 59.826048 Hz.
- 0.143: Changed SH-2 CPU1/2 clock speed to 28636360 Hz, 68000 CPU3 to 11289600 Hz and VSync to 59.764793 Hz.
- 0.180: Added audio\rax.cpp/h. Emulated the Acclaim RAX sound board, fixing sound in Batman Forever [Phil Bennett]. Worked around VDP1 timings in Sega Saturn, fixes regression with (MESS) Batman Forever gameplay speed (video\stvvdp1.cpp). Added Rotation Parameter read control register, fixes at least Riddler stage ROZ positioning in Batman Forever (video\stvvdp2.cpp) [Angelo Salese]. Changed the SH2 disassemblers to use 'std::ostream &' internally [AJR]. Changed visible area to 352x224.
- 0.214: Added machine\segabill.cpp/h, layout\segabill.lay and layout\segabillv.lay. Emulated the Sega Billboard and hook it up to the STV driver. It's not shown by default. To view it, choose the layout view 'Billboard'. YouTube: https://youtu.be/csuOJBU5rzo [biggestsonicfan, Dirk Best]. Added Z80 (8MHz) CPU5. Added dipswitches 'Test Winner LED P1/2', 'Test 7-Segment P1/2', 'Demo', 'Testmode' and 2x 'Unknown'.
Resolution, 0.106-0.128: 704x513 @ 60.000000Hz
Resolution, 0.129-0.133: 704x512 @ 60.000000Hz
Resolution, 0.134-0.142: 320x224 @ 59.828244Hz
Resolution, 0.143-0.179: 320x224 @ 59.764793Hz
Resolution, 0.180-0.193: 352x224 @ 59.764793Hz
Resolution, 0.194-0.255: 352x224 @ 59.764802Hz
TG Game Entry: https://www.twingalaxies.com/game/pr...10-v1000/mame/
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78975
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78976
Service Mode:
Standard Sega ST-V BIOS.
Service Mode is accessed with the Service Button (F2). Navigation is with the Test (9) button and selection is with the Service Button. Each cartridge has a separate interface from the ST-V BIOS and its own navigation changes with the cart implementation: instructions on screen.
Default Settings:
MAME 0.106:
MAME 0.250:
STV BIOS:
Cart Settings:
primglex
ROM set changed: no
0.106-0.130: primglex - "Prime Goal EX (PG1/VER.A)"
0.131-0.175: primglex - "Prime Goal EX (Japan, PG1/VER.A)"
Resolution, 0.106-0.136: 640x480 @ 60.000000Hz
Resolution, 0.137-0.143: 640x480 @ 30.000000Hz
Resolution, 0.144-0.175: 640x480 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....gamename=Prime Goal EX [PG1/VER.A]
Rules, Biggest Blowout: https://www.twingalaxies.com/scores.php?scores=78974
0.106-0.130: primglex - "Prime Goal EX (PG1/VER.A)"
0.131-0.175: primglex - "Prime Goal EX (Japan, PG1/VER.A)"
Resolution, 0.106-0.136: 640x480 @ 60.000000Hz
Resolution, 0.137-0.143: 640x480 @ 30.000000Hz
Resolution, 0.144-0.175: 640x480 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....gamename=Prime Goal EX [PG1/VER.A]
Rules, Biggest Blowout: https://www.twingalaxies.com/scores.php?scores=78974
primrageo, primrage
Note: two ROM sets are represented here with a changeover at 0.249.
MAME History:
- 0.114u2: Aaron Giles and Couriersud added more accurate video timing to most of the Atari 68000-era games. The parameters are from published specs, not derived. The board uses a pair of GALs to determine H and V parameters. Changed VSync to 59.922743 Hz.
- 0.249: Guru added Primal Rage (version 2.3, newer build). Note: Still shows 'version 2.3' on the title screen but build is newer than the primrage set. Changed (version 2.3) to clone 'Primal Rage (version 2.3, older build)'. Renamed (primrage) to (primrageo).
- 0.259: Added release month to title instead of newer build/older build [hap]. Changed description of (version 2.3, newer build) to 'Primal Rage (version 2.3, Jan 1995)' and clone (version 2.3, older build) to 'Primal Rage (version 2.3, Dec 1994)'.
Primal Rage (version 2.3, older build)
--------------------------------------
ROM set changed: yes
0.106-0.248: primrage - "Primal Rage (version 2.3)"
0.249-0.258: primrageo - "Primal Rage (version 2.3, older build)"
0.259-0.260: primrageo - "Primal Rage (version 2.3, Dec 1994)"
Resolution, 0.106-0.114: 336x240 @ 60.000000Hz
Resolution, 0.115-0.260: 336x240 @ 59.922743Hz
TG Game Entry: https://www.twingalaxies.com/game/pr...rsion-23/mame/
Rules, Points [Tournament Settings]: https://www.twingalaxies.com/scores.php?scores=78973
Primal Rage (version 2.3, newer build)
--------------------------------------
Note: not currently represented on TG.
ROM set changed: no. Added in 0.249.
0.249-0.258: primrage - "Primal Rage (version 2.3, newer build)"
0.259-0.260: primrage - "Primal Rage (version 2.3, Jan 1995)"
Resolution, 0.249-0.260: 336x240 @ 59.922743Hz
Rules: [not current tracks]
Service Mode:
Typical Atari GT hardware.
Service Mode is accessed by enabling the DIP Switch which can be toggled with the Service Mode Button (F2). Navigation is with P1 Up and Down, selection with P1 Button 1 at the top level and instructions for sub-sections appear at the bottom of the screen.
Note 1: the instruction of "Left PL Lower Left Button" means P1 Button 1 in MAME and "Left Pl Upper Right Button" means P1 Button 2 in MAME.
Note 2: the Game Options screen is a scrollable list.
Default Settings:
MAME 0.106:
MAME 0.249:
MAME 0.259:
Internal Game Options:
| 
Internal Coin Options:
MAME History:
- 0.114u2: Aaron Giles and Couriersud added more accurate video timing to most of the Atari 68000-era games. The parameters are from published specs, not derived. The board uses a pair of GALs to determine H and V parameters. Changed VSync to 59.922743 Hz.
- 0.249: Guru added Primal Rage (version 2.3, newer build). Note: Still shows 'version 2.3' on the title screen but build is newer than the primrage set. Changed (version 2.3) to clone 'Primal Rage (version 2.3, older build)'. Renamed (primrage) to (primrageo).
- 0.259: Added release month to title instead of newer build/older build [hap]. Changed description of (version 2.3, newer build) to 'Primal Rage (version 2.3, Jan 1995)' and clone (version 2.3, older build) to 'Primal Rage (version 2.3, Dec 1994)'.
Primal Rage (version 2.3, older build)
--------------------------------------
ROM set changed: yes
0.106-0.248: primrage - "Primal Rage (version 2.3)"
0.249-0.258: primrageo - "Primal Rage (version 2.3, older build)"
0.259-0.260: primrageo - "Primal Rage (version 2.3, Dec 1994)"
Resolution, 0.106-0.114: 336x240 @ 60.000000Hz
Resolution, 0.115-0.260: 336x240 @ 59.922743Hz
TG Game Entry: https://www.twingalaxies.com/game/pr...rsion-23/mame/
Rules, Points [Tournament Settings]: https://www.twingalaxies.com/scores.php?scores=78973
Primal Rage (version 2.3, newer build)
--------------------------------------
Note: not currently represented on TG.
ROM set changed: no. Added in 0.249.
0.249-0.258: primrage - "Primal Rage (version 2.3, newer build)"
0.259-0.260: primrage - "Primal Rage (version 2.3, Jan 1995)"
Resolution, 0.249-0.260: 336x240 @ 59.922743Hz
Rules: [not current tracks]
Service Mode:
Typical Atari GT hardware.
Service Mode is accessed by enabling the DIP Switch which can be toggled with the Service Mode Button (F2). Navigation is with P1 Up and Down, selection with P1 Button 1 at the top level and instructions for sub-sections appear at the bottom of the screen.
Note 1: the instruction of "Left PL Lower Left Button" means P1 Button 1 in MAME and "Left Pl Upper Right Button" means P1 Button 2 in MAME.
Note 2: the Game Options screen is a scrollable list.
Default Settings:
MAME 0.106:
MAME 0.249:
MAME 0.259:
Internal Game Options:
Internal Coin Options:
prmrsocr
ROM set changed: no
0.106-0.255: prmrsocr - "Premier Soccer (ver EAB)"
MAME History:
- 0.143u8: Kanikani added DIP locations to Premier Soccer.
Resolution, 0.106-0.255: 288x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/pr...-ver-eab/mame/
Rules, Biggest Blowout: https://www.twingalaxies.com/scores.php?scores=78970
Service Mode:
Atypical "TMNT"-style hardware.
There are both hardware DIP switches & internal settings. Hardware DIP switches will reflect local configuration after playback, not the recording. Other relevant rules are covered by internal settings. If not shown during playback. Service Mode is accessed using the Service Button (F2). Navigation is with P1 Up and Down, selection is with P1 Button 1. Instructions are given on each screen.
Default Settings:
| 
| 
0.106-0.255: prmrsocr - "Premier Soccer (ver EAB)"
MAME History:
- 0.143u8: Kanikani added DIP locations to Premier Soccer.
Resolution, 0.106-0.255: 288x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/pr...-ver-eab/mame/
Rules, Biggest Blowout: https://www.twingalaxies.com/scores.php?scores=78970
Service Mode:
Atypical "TMNT"-style hardware.
There are both hardware DIP switches & internal settings. Hardware DIP switches will reflect local configuration after playback, not the recording. Other relevant rules are covered by internal settings. If not shown during playback. Service Mode is accessed using the Service Button (F2). Navigation is with P1 Up and Down, selection is with P1 Button 1. Instructions are given on each screen.
Default Settings:
progear
ROM set changed: no
0.106-0.111: progear - "Progear (US 010117)"
0.112-0.175: progear - "Progear (USA 010117)"
Resolution, 0.106-0.113: 384x224 @ 59.633331Hz
Resolution, 0.114-0.127: 384x224 @ 59.633333Hz
Resolution, 0.128-0.152: 384x224 @ 59.629403Hz
Resolution, 0.153-0.175: 384x224 @ 59.637405Hz
TG Game Entry: https://www.twingalaxies.com/scores....ame=Progear%20[US%20010117]
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78982
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78983
0.106-0.111: progear - "Progear (US 010117)"
0.112-0.175: progear - "Progear (USA 010117)"
Resolution, 0.106-0.113: 384x224 @ 59.633331Hz
Resolution, 0.114-0.127: 384x224 @ 59.633333Hz
Resolution, 0.128-0.152: 384x224 @ 59.629403Hz
Resolution, 0.153-0.175: 384x224 @ 59.637405Hz
TG Game Entry: https://www.twingalaxies.com/scores....ame=Progear%20[US%20010117]
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78982
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78983
progress
ROM set changed: no
0.106-0.175: progress - "Progress"
Resolution, 0.106-0.175: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....ename=Progress
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78984
Note: the rules were written for 0.106 and indicate all Unknown switches be off. One of those switches governs the bonus life setting - the Off setting matches the 20K & 100K setting of newer MAME versions. One of the other switches is now known to be the Invincibility (Cheat) switch and is off in the rules.
0.106-0.175: progress - "Progress"
Resolution, 0.106-0.175: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....ename=Progress
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78984
Note: the rules were written for 0.106 and indicate all Unknown switches be off. One of those switches governs the bonus life setting - the Off setting matches the 20K & 100K setting of newer MAME versions. One of the other switches is now known to be the Invincibility (Cheat) switch and is off in the rules.
propcycl
ROM set changed: no
0.106-0.131: propcycl - "Prop Cycle (Rev PR2 Ver.A)"
0.132-0.189: propcycl - "Prop Cycle (Rev. PR2 Ver.A)"
0.190-0.204: propcycl - "Prop Cycle (Rev. PR2 Ver.A, World)"
From MAMEINFO.DAT:
- 0.131u3: Changed description to 'Prop Cycle (Rev. PR2 Ver.A)'.
- 0.190: Changed description to 'Prop Cycle (Rev. PR2 Ver.A, World)'.
Resolution, 0.106-0.144: 640x480 @ 60.000000Hz
Resolution, 0.145-0.152: 640x480 @ 59.937809Hz
Resolution, 0.153-0.202: 640x480 @ 60.000000Hz
Resolution, 0.203-0.204: 640x480 @ 59.904060Hz
TG Game Entry: https://www.twingalaxies.com/game/propcycle/mame/
Rules, Points: {Advanced Story**: https://www.twingalaxies.com/scores.php?scores=131668
Rules, Points: {Novice / Cliff Rock**: https://www.twingalaxies.com/scores.php?scores=131665
Rules, Points: {Novice / Industarn**: https://www.twingalaxies.com/scores.php?scores=131667
Rules, Points: {Novice / Wind Woods**: https://www.twingalaxies.com/scores.php?scores=131666
NOTE: To calibrate the steering hold down service (9) and tap test (F2). Exit with F2.
0.106-0.131: propcycl - "Prop Cycle (Rev PR2 Ver.A)"
0.132-0.189: propcycl - "Prop Cycle (Rev. PR2 Ver.A)"
0.190-0.204: propcycl - "Prop Cycle (Rev. PR2 Ver.A, World)"
From MAMEINFO.DAT:
- 0.131u3: Changed description to 'Prop Cycle (Rev. PR2 Ver.A)'.
- 0.190: Changed description to 'Prop Cycle (Rev. PR2 Ver.A, World)'.
Resolution, 0.106-0.144: 640x480 @ 60.000000Hz
Resolution, 0.145-0.152: 640x480 @ 59.937809Hz
Resolution, 0.153-0.202: 640x480 @ 60.000000Hz
Resolution, 0.203-0.204: 640x480 @ 59.904060Hz
TG Game Entry: https://www.twingalaxies.com/game/propcycle/mame/
Rules, Points: {Advanced Story**: https://www.twingalaxies.com/scores.php?scores=131668
Rules, Points: {Novice / Cliff Rock**: https://www.twingalaxies.com/scores.php?scores=131665
Rules, Points: {Novice / Industarn**: https://www.twingalaxies.com/scores.php?scores=131667
Rules, Points: {Novice / Wind Woods**: https://www.twingalaxies.com/scores.php?scores=131666
NOTE: To calibrate the steering hold down service (9) and tap test (F2). Exit with F2.
pspikes2
ROM set changed: no
0.106-0.143: pspikes2 - "Power Spikes II"
0.144-0.260: pspikes2 - "Power Spikes II (NGM-068)"
MAME History:
- 0.113u2: Zsolt Vasvari updated NeoGeo driver to the new video timing code and screen raw parameters, this fixes also the messed up graphics. Changed VSync to 59.185606 Hz.
- 0.129u3: Fabio Priuli added missing HARDDIP settings in 'STANDARD_DIPS' for DIP's 4,5 and 6 ("COMM Setting"). Added dipswitches 'COMM Setting (Cabinet No.)' and 'COMM Setting (Link Enable)'.
- 0.143u1: Fixed rom names. Changed description to 'Sengoku / Sengoku Denshou (NGM-017)(NGH-017)' and clone (set 2) to 'Sengoku / Sengoku Denshou (NGH-017)(US)'.
- 0.143u4: Changed description to 'Power Spikes II (NGM-068)'.
- 0.150: Endian fix for kof2003 protection (machine\neocrypt.c and neoprot.c). Fixed NeoGeo memory leak, clean up inputs a bit [Alex Jackson]. Changed 'Test Switch' dipswitch to 'Service Mode'.
- 0.151: [- snip -] [Alex Jackson]. Added coin slots 3 and 4. Added dipswitches 'Setting Mode', 'Cabinet' and 'Controller'.
Resolution, 0.106-0.113: 320x224 @ 59.185608Hz
Resolution, 0.114-0.260: 320x224 @ 59.185606Hz
TG Game Entry: https://www.twingalaxies.com/game/po...kes-world/mame
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78964
Service Mode:
Standard SNK NeoGeo BIOS.
All relevant rules are covered by internal settings. If not shown during playback, use F2 to access after playback completed. Navigation is with P1 Up & Down. Select menu option with P1 Button 1 and sub-menus can be exited with P1 Button 3. P1 Button 1 and P1 Button 2 adjust individual configuration options.
Default Settings:
MAME 0.106 DIP Switches:
MAME 0.130 DIP Switches:
MAME 0.150 DIP Switches:
MAME 0.151 DIP Switches:
MAME 0.250 DIP Switches:
|
MAME 0.250 BIOS:
Cartridge:
| 
0.106-0.143: pspikes2 - "Power Spikes II"
0.144-0.260: pspikes2 - "Power Spikes II (NGM-068)"
MAME History:
- 0.113u2: Zsolt Vasvari updated NeoGeo driver to the new video timing code and screen raw parameters, this fixes also the messed up graphics. Changed VSync to 59.185606 Hz.
- 0.129u3: Fabio Priuli added missing HARDDIP settings in 'STANDARD_DIPS' for DIP's 4,5 and 6 ("COMM Setting"). Added dipswitches 'COMM Setting (Cabinet No.)' and 'COMM Setting (Link Enable)'.
- 0.143u1: Fixed rom names. Changed description to 'Sengoku / Sengoku Denshou (NGM-017)(NGH-017)' and clone (set 2) to 'Sengoku / Sengoku Denshou (NGH-017)(US)'.
- 0.143u4: Changed description to 'Power Spikes II (NGM-068)'.
- 0.150: Endian fix for kof2003 protection (machine\neocrypt.c and neoprot.c). Fixed NeoGeo memory leak, clean up inputs a bit [Alex Jackson]. Changed 'Test Switch' dipswitch to 'Service Mode'.
- 0.151: [- snip -] [Alex Jackson]. Added coin slots 3 and 4. Added dipswitches 'Setting Mode', 'Cabinet' and 'Controller'.
Resolution, 0.106-0.113: 320x224 @ 59.185608Hz
Resolution, 0.114-0.260: 320x224 @ 59.185606Hz
TG Game Entry: https://www.twingalaxies.com/game/po...kes-world/mame
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78964
Service Mode:
Standard SNK NeoGeo BIOS.
All relevant rules are covered by internal settings. If not shown during playback, use F2 to access after playback completed. Navigation is with P1 Up & Down. Select menu option with P1 Button 1 and sub-menus can be exited with P1 Button 3. P1 Button 1 and P1 Button 2 adjust individual configuration options.
Default Settings:
MAME 0.106 DIP Switches:
MAME 0.130 DIP Switches:
MAME 0.150 DIP Switches:
MAME 0.151 DIP Switches:
MAME 0.250 DIP Switches:
MAME 0.250 BIOS:
Cartridge:
pspikes
ROM set changed: no
0.106-0.205: pspikes - "Power Spikes (World)"
Resolution, 0.106-0.135: 352x240 @ 60.000000Hz
Resolution, 0.136-0.205: 352x240 @ 61.310000Hz
TG Game Entry: https://www.twingalaxies.com/game/po...kes-world/mame
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78963
0.106-0.205: pspikes - "Power Spikes (World)"
Resolution, 0.106-0.135: 352x240 @ 60.000000Hz
Resolution, 0.136-0.205: 352x240 @ 61.310000Hz
TG Game Entry: https://www.twingalaxies.com/game/po...kes-world/mame
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78963
psurge
ROM set changed: no
0.106-0.209: psurge - "Power Surge"
Resolution, 0.106-0.209: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/power-surge/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78965
0.106-0.209: psurge - "Power Surge"
Resolution, 0.106-0.209: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/power-surge/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78965
psychic5j
ROM set changed: yes
0.106-0.129: psychic5 - "Psychic 5"
0.130-0.157: psychic5 - "Psychic 5 (set 1)"
0.158-0.175: psychic5j - "Psychic 5 (Japan)"
MAME History:
- 0.158: Idenfitied 'psychic5a' as the World / Overseas version, and the current parent as the Japan version, swapped them and named them as such (see https://tcrf.net/Psychic_5) [The Cutting Room Floor]. Changed (set 1) to clone 'Psychic 5 (Japan)' and (set 2) to parent 'Psychic 5 (World)'. Renamed (psychic5) to (psychic5j) and (psychic5a) to (psychic5).
Resolution, 0.106-0.113: 256x224 @ 53.799999Hz
Resolution, 0.114-0.169: 256x224 @ 53.800000Hz
Resolution, 0.170-0.175: 256x224 @ 54.001512Hz
TG Game Entry: https://www.twingalaxies.com/scores....me=Psychic%205
Rules, Points: https://www.twingalaxies.com/scores.php?scores=17220
0.106-0.129: psychic5 - "Psychic 5"
0.130-0.157: psychic5 - "Psychic 5 (set 1)"
0.158-0.175: psychic5j - "Psychic 5 (Japan)"
MAME History:
- 0.158: Idenfitied 'psychic5a' as the World / Overseas version, and the current parent as the Japan version, swapped them and named them as such (see https://tcrf.net/Psychic_5) [The Cutting Room Floor]. Changed (set 1) to clone 'Psychic 5 (Japan)' and (set 2) to parent 'Psychic 5 (World)'. Renamed (psychic5) to (psychic5j) and (psychic5a) to (psychic5).
Resolution, 0.106-0.113: 256x224 @ 53.799999Hz
Resolution, 0.114-0.169: 256x224 @ 53.800000Hz
Resolution, 0.170-0.175: 256x224 @ 54.001512Hz
TG Game Entry: https://www.twingalaxies.com/scores....me=Psychic%205
Rules, Points: https://www.twingalaxies.com/scores.php?scores=17220
psychic5
Note: two ROM sets represented here with changeover at 0.158.
MAME History:
- 0.158: Idenfitied 'psychic5a' as the World / Overseas version, and the current parent as the Japan version, swapped them and named them as such (see https://tcrf.net/Psychic_5) [The Cutting Room Floor]. Changed (set 1) to clone 'Psychic 5 (Japan)' and (set 2) to parent 'Psychic 5 (World)'. Renamed (psychic5) to (psychic5j) and (psychic5a) to (psychic5).
Psychic 5 (Japan)
-----------------
ROM set changed: yes
0.106-0.129: psychic5 - "Psychic 5"
0.130-0.157: psychic5 - "Psychic 5 (set 1)"
0.158-0.175: psychic5j - "Psychic 5 (Japan)"
Resolution, 0.106-0.113: 256x224 @ 53.799999Hz
Resolution, 0.114-0.169: 256x224 @ 53.800000Hz
Resolution, 0.170-0.175: 256x224 @ 54.001512Hz
TG Game Entry: https://www.twingalaxies.com/scores....me=Psychic%205
Rules, Points: https://www.twingalaxies.com/scores.php?scores=17220
Psychic 5 (World)
-----------------
Note: not currently represented at TG.
ROM set changed: no. Added in 0.158.
0.158-0.176: psychic5 - "Psychic 5 (World)"
Resolution, 0.158-0.169: 256x224 @ 53.800000Hz
Resolution, 0.170-0.176: 256x224 @ 54.001512Hz
Rules: [no current tracks]
MAME History:
- 0.158: Idenfitied 'psychic5a' as the World / Overseas version, and the current parent as the Japan version, swapped them and named them as such (see https://tcrf.net/Psychic_5) [The Cutting Room Floor]. Changed (set 1) to clone 'Psychic 5 (Japan)' and (set 2) to parent 'Psychic 5 (World)'. Renamed (psychic5) to (psychic5j) and (psychic5a) to (psychic5).
Psychic 5 (Japan)
-----------------
ROM set changed: yes
0.106-0.129: psychic5 - "Psychic 5"
0.130-0.157: psychic5 - "Psychic 5 (set 1)"
0.158-0.175: psychic5j - "Psychic 5 (Japan)"
Resolution, 0.106-0.113: 256x224 @ 53.799999Hz
Resolution, 0.114-0.169: 256x224 @ 53.800000Hz
Resolution, 0.170-0.175: 256x224 @ 54.001512Hz
TG Game Entry: https://www.twingalaxies.com/scores....me=Psychic%205
Rules, Points: https://www.twingalaxies.com/scores.php?scores=17220
Psychic 5 (World)
-----------------
Note: not currently represented at TG.
ROM set changed: no. Added in 0.158.
0.158-0.176: psychic5 - "Psychic 5 (World)"
Resolution, 0.158-0.169: 256x224 @ 53.800000Hz
Resolution, 0.170-0.176: 256x224 @ 54.001512Hz
Rules: [no current tracks]
psychos
ROM set changed: no
0.106-0.175: psychos - "Psycho Soldier (US)"
Resolution, 0.106-0.127: 384x224 @ 60.000000Hz
Resolution, 0.128-0.129: 368x224 @ 60.000000Hz
Resolution, 0.130-0.175: 400x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....amename=Psycho Soldier [US]
0.106-0.175: psychos - "Psycho Soldier (US)"
Resolution, 0.106-0.127: 384x224 @ 60.000000Hz
Resolution, 0.128-0.129: 368x224 @ 60.000000Hz
Resolution, 0.130-0.175: 400x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....amename=Psycho Soldier [US]
ptblank2
ROM set changed: no
0.106-0.212: ptblank2 - "Point Blank 2 (GNB5/VER.A)"
Resolution, 0.106-0.212: 640x480 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/po...gnb5-vera/mame
Rules, Points [Practice Mode]: https://www.twingalaxies.com/scores.php?scores=78928
Rules, Points [Beginner Mode]: https://www.twingalaxies.com/scores.php?scores=78926
Rules, Points [Advanced Mode]: https://www.twingalaxies.com/scores.php?scores=78925
Rules, Points [Insane Mode]: https://www.twingalaxies.com/scores.php?scores=78927
NOTE: This game has both DIPs & internal settings covered by the rules. If not shown during playback, press F2 to access & check internal settings afterwards.
0.106-0.212: ptblank2 - "Point Blank 2 (GNB5/VER.A)"
Resolution, 0.106-0.212: 640x480 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/po...gnb5-vera/mame
Rules, Points [Practice Mode]: https://www.twingalaxies.com/scores.php?scores=78928
Rules, Points [Beginner Mode]: https://www.twingalaxies.com/scores.php?scores=78926
Rules, Points [Advanced Mode]: https://www.twingalaxies.com/scores.php?scores=78925
Rules, Points [Insane Mode]: https://www.twingalaxies.com/scores.php?scores=78927
NOTE: This game has both DIPs & internal settings covered by the rules. If not shown during playback, press F2 to access & check internal settings afterwards.
ptblank
ROM set changed: no
0.106-0.133: ptblank - "Point Blank"
0.134-0.165: ptblank - "Point Blank (World, GN2 Rev B)"
0.166-0.214: ptblank - "Point Blank (World, GN2 Rev B, set 1)"
MAME History:
- 0.133u2: Brian Troha and Dumping Union added clone Gun Bullet (World, GN3 Rev B). Changed parent description to 'Point Blank (World, GN2 Rev B)' and clone 'Gun Bullet (Japan)' to 'Gun Bullet (Japan, GN1)'. Renamed (gunbulet) to (gunbuletj).
- 0.153: Added default EEPROM.
- 0.166: Caius, Smitdogg and The Dumping Union added clone 'Point Blank (World, GN2 Rev B, set 2)' (Namco 1994). Changed parent description to 'Point Blank (World, GN2 Rev B, set 1)'.
Resolution, 0.106-0.113: 288x224 @ 59.700001Hz
Resolution, 0.114-0.202: 288x224 @ 59.700000Hz
Resolution, 0.203-0.214: 288x224 @ 59.659091Hz
TG Game Entry: https://www.twingalaxies.com/game/point-blank/mame
Rules, Points [Training Mode]: https://www.twingalaxies.com/scores.php?scores=78923
Rules, Points [Beginner Mode]: https://www.twingalaxies.com/scores.php?scores=78921
Rules, Points [Expert Mode]: https://www.twingalaxies.com/scores.php?scores=78922
Rules, Points [Very Hard Mode]: https://www.twingalaxies.com/scores.php?scores=78924
IMPORTANT NOTES:
EEPROM added to the required ROMset at 0.153 changed starting lives from 1 to 3! As at 2019-08-25, no Internal Settings have been written into the rule sets for the tracks above, which is a MAJOR oversight!
Newer tracks below have an explicit rule stating 3 lives...
Rules, (Training Mode): https://www.twingalaxies.com/scores.php?scores=226793
Rules, (Beginner Mode): https://www.twingalaxies.com/scores.php?scores=226794
Rules, (Expert Mode): https://www.twingalaxies.com/scores.php?scores=226792
Rules, (Very Hard Mode): https://www.twingalaxies.com/scores.php?scores=226791
0.106-0.133: ptblank - "Point Blank"
0.134-0.165: ptblank - "Point Blank (World, GN2 Rev B)"
0.166-0.214: ptblank - "Point Blank (World, GN2 Rev B, set 1)"
MAME History:
- 0.133u2: Brian Troha and Dumping Union added clone Gun Bullet (World, GN3 Rev B). Changed parent description to 'Point Blank (World, GN2 Rev B)' and clone 'Gun Bullet (Japan)' to 'Gun Bullet (Japan, GN1)'. Renamed (gunbulet) to (gunbuletj).
- 0.153: Added default EEPROM.
- 0.166: Caius, Smitdogg and The Dumping Union added clone 'Point Blank (World, GN2 Rev B, set 2)' (Namco 1994). Changed parent description to 'Point Blank (World, GN2 Rev B, set 1)'.
Resolution, 0.106-0.113: 288x224 @ 59.700001Hz
Resolution, 0.114-0.202: 288x224 @ 59.700000Hz
Resolution, 0.203-0.214: 288x224 @ 59.659091Hz
TG Game Entry: https://www.twingalaxies.com/game/point-blank/mame
Rules, Points [Training Mode]: https://www.twingalaxies.com/scores.php?scores=78923
Rules, Points [Beginner Mode]: https://www.twingalaxies.com/scores.php?scores=78921
Rules, Points [Expert Mode]: https://www.twingalaxies.com/scores.php?scores=78922
Rules, Points [Very Hard Mode]: https://www.twingalaxies.com/scores.php?scores=78924
IMPORTANT NOTES:
EEPROM added to the required ROMset at 0.153 changed starting lives from 1 to 3! As at 2019-08-25, no Internal Settings have been written into the rule sets for the tracks above, which is a MAJOR oversight!
Newer tracks below have an explicit rule stating 3 lives...
Rules, (Training Mode): https://www.twingalaxies.com/scores.php?scores=226793
Rules, (Beginner Mode): https://www.twingalaxies.com/scores.php?scores=226794
Rules, (Expert Mode): https://www.twingalaxies.com/scores.php?scores=226792
Rules, (Very Hard Mode): https://www.twingalaxies.com/scores.php?scores=226791
pturn
ROM set changed: no
0.106-0.175: pturn - "Parallel Turn"
Resolution, 0.106-0.175: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....ename=Parallel Turn
0.106-0.175: pturn - "Parallel Turn"
Resolution, 0.106-0.175: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....ename=Parallel Turn
puchicar
ROM set changed: no
0.106-0.250: puchicar - "Puchi Carat (Ver 2.02O 1997/10/29)"
MAME History:
- 0.113u2: Changed VSync to 58.970000 Hz.
Resolution, 0.106-0.113: 320x232 @ 58.970001Hz
Resolution, 0.114-0.250: 320x232 @ 58.970000Hz
TG Game Entry: https://www.twingalaxies.com/game/pu...97-10-29/mame/
Rules, Points [Player Mode]: https://www.twingalaxies.com/scores.php?scores=96201
Rules, Points [Player vs Computer Mode]: https://www.twingalaxies.com/scores.php?scores=78988
Service Mode:
Typical Taito F3 BIOS.
All relevant rules are covered by internal settings. Service Mode can be accessed using the Service button (F2). Navigate with P1 Up and Down. Select menu options with P1 Start button. Change settings with P1 Left and Right.
Default Settings:
0.106-0.250: puchicar - "Puchi Carat (Ver 2.02O 1997/10/29)"
MAME History:
- 0.113u2: Changed VSync to 58.970000 Hz.
Resolution, 0.106-0.113: 320x232 @ 58.970001Hz
Resolution, 0.114-0.250: 320x232 @ 58.970000Hz
TG Game Entry: https://www.twingalaxies.com/game/pu...97-10-29/mame/
Rules, Points [Player Mode]: https://www.twingalaxies.com/scores.php?scores=96201
Rules, Points [Player vs Computer Mode]: https://www.twingalaxies.com/scores.php?scores=78988
Service Mode:
Typical Taito F3 BIOS.
All relevant rules are covered by internal settings. Service Mode can be accessed using the Service button (F2). Navigate with P1 Up and Down. Select menu options with P1 Start button. Change settings with P1 Left and Right.
Default Settings:
puckmana, puckmanb, puckman
NOTE: two ROM sets represented here with changeover at 0.148u4.
MAME History:
- 0.147u2: hap changed description to 'Puck Man (Japan set 1)' and clones (Japan set 2) to 'Puck Man (Japan set 2)', (Japan set 1 with speedup hack) to 'Puck Man (Japan set 1 with speedup hack)', (Falcom?) to 'Puck Man (Falcom?)' and (Japan set 3) to 'Puck Man (Japan set 3)'.
- 0.148u4: Verified original puckman roms and made that set the parent and split some of the roms [Andy Welburn]. Changed clone (Japan set 2) to parent 'Puck Man (Japan set 1)', (Japan set 1) to clone 'Puck Man (bootleg set 1)', (Japan set 1, speedup hack) to 'Puck Man (speedup hack)', (Falcom?) to 'Puck Man (bootleg set 2)' and (Japan set 3) to 'Puck Man (Japan set 2)'. Renamed (puckman) to (puckmanb) and (puckmana) to (puckman).
Puck Man (bootleg set 1)
------------------------
ROM set changes: yes:
0.53-0.131: puckman - "PuckMan (Japan set 1, Probably Bootleg)"
0.132-0.147: puckman - "PuckMan (Japan set 1)"
0.148: puckman - "Puck Man (Japan set 1)"
0.148u4-0.250: puckmanb - "Puck Man (bootleg set 1)"
Resolution, 0.106-0.113: 288x224 @ 60.606060Hz
Resolution, 0.114-0.250: 288x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/pac-man/mame/
Rules, High Score Challenge: https://www.twingalaxies.com/scores.php?scores=197901
Rules, Points [TG settings]: https://www.twingalaxies.com/scores.php?scores=11853
Note 1: Between 2005 and 2016 the Pac-Man "Points [TG settings]" rules only permitted the puckman ROM set. Prior to 2005, only the pacman ROM set was permitted. 2016 has muddied the waters.
Note 2: do not use Service Mode (F2) to check after playback as it will have reverted to localised settings.
Puck Man (Japan set 1)
----------------------
ROM set changed: yes
0.106-0.147: puckmana - "PuckMan (Japan set 2)"
0.148: puckmana - "Puck Man (Japan set 2)"
0.148u4-0.250: puckman - "Puck Man (Japan set 1)"
Resolution, 0.106-0.113: 288x224 @ 60.606060Hz
Resolution, 0.114-0.250: 288x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/pac-man/mame/
Rules, High Score Challenge: https://www.twingalaxies.com/scores.php?scores=197901
... plus many "Fastest Perfect" tracks.
MAME History:
- 0.147u2: hap changed description to 'Puck Man (Japan set 1)' and clones (Japan set 2) to 'Puck Man (Japan set 2)', (Japan set 1 with speedup hack) to 'Puck Man (Japan set 1 with speedup hack)', (Falcom?) to 'Puck Man (Falcom?)' and (Japan set 3) to 'Puck Man (Japan set 3)'.
- 0.148u4: Verified original puckman roms and made that set the parent and split some of the roms [Andy Welburn]. Changed clone (Japan set 2) to parent 'Puck Man (Japan set 1)', (Japan set 1) to clone 'Puck Man (bootleg set 1)', (Japan set 1, speedup hack) to 'Puck Man (speedup hack)', (Falcom?) to 'Puck Man (bootleg set 2)' and (Japan set 3) to 'Puck Man (Japan set 2)'. Renamed (puckman) to (puckmanb) and (puckmana) to (puckman).
Puck Man (bootleg set 1)
------------------------
ROM set changes: yes:
0.53-0.131: puckman - "PuckMan (Japan set 1, Probably Bootleg)"
0.132-0.147: puckman - "PuckMan (Japan set 1)"
0.148: puckman - "Puck Man (Japan set 1)"
0.148u4-0.250: puckmanb - "Puck Man (bootleg set 1)"
Resolution, 0.106-0.113: 288x224 @ 60.606060Hz
Resolution, 0.114-0.250: 288x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/pac-man/mame/
Rules, High Score Challenge: https://www.twingalaxies.com/scores.php?scores=197901
Rules, Points [TG settings]: https://www.twingalaxies.com/scores.php?scores=11853
Note 1: Between 2005 and 2016 the Pac-Man "Points [TG settings]" rules only permitted the puckman ROM set. Prior to 2005, only the pacman ROM set was permitted. 2016 has muddied the waters.
Note 2: do not use Service Mode (F2) to check after playback as it will have reverted to localised settings.
Puck Man (Japan set 1)
----------------------
ROM set changed: yes
0.106-0.147: puckmana - "PuckMan (Japan set 2)"
0.148: puckmana - "Puck Man (Japan set 2)"
0.148u4-0.250: puckman - "Puck Man (Japan set 1)"
Resolution, 0.106-0.113: 288x224 @ 60.606060Hz
Resolution, 0.114-0.250: 288x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/pac-man/mame/
Rules, High Score Challenge: https://www.twingalaxies.com/scores.php?scores=197901
... plus many "Fastest Perfect" tracks.
puckpkmnb, puckpkmn
Note: two ROM sets represented here with changeover at 0.256.
MAME History:
- 0.251: Added Mega Drive I/O port controller device (sega\mdioport.cpp). Adapted all Mega Drive hardware drivers to work with the new I/O port device and moved based Mega Drive 68k peripherals to a common address map function. Created a light-weight base class with just the core functionality, used for "Genie" hardware (Puckman Pockimon). Moved built-in controller emulation to a derived class so it isn't lurking underneath the consoles with pluggable controllers. Moved YM sound out of "core" Mega Drive state and made more devices required in "base" Mega Drive state. Correct title [Vas Crabb]. Changed description of clone (set 2) to 'Jingling Jiazu' and (set 3) to 'Puckman Pockimon (set 2)'.
- 0.256: Made Puckman Pockimon set showing Sun Mixing copyright the parent [Vas Crabb]. Changed (set 1) to clone 'Puckman Pockimon Genie 2000 (bootleg)' and clones (set 2) to parent 'Puckman Pockimon Genie 2000' and 'Jingling Jiazu' to 'Jingling Jiazu Genie 2000'. Renamed (puckpkmn) to (puckpkmnb), (puckpkmnb) to (puckpkmn) and (puckpkmna) to (jingling).
Puckman Pockimon (set 1) / Puckman Pockimon Genie 2000 (bootleg)
----------------------
ROM set changed: yes.
0.106-0.139: puckpkmn - "Puckman Pockimon"
0.140-0.255: puckpkmn - "Puckman Pockimon (set 1)"
0.256: puckpkmnb - "Puckman Pockimon Genie 2000 (bootleg)"
Resolution, 0.106-0.134: 320x224 @ 60.000000Hz
Resolution, 0.135-0.212: 256x224 @ 60.000000Hz
Resolution, 0.213-0.256: 256x224 @ 59.922743Hz
TG Game Entry: https://www.twingalaxies.com/game/pu...pockimon/mame/
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78989
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78990
Puckman Pockimon (set 3) / (set 2) / Puckman Pockimon Genie 2000
----------------------
ROM set changed: yes.
0.106-0.152: NOT SUPPORTED
0.153-0.250: puckpkmnb - "Puckman Pockimon (set 3)"
0.251-0.255: puckpkmnb - "Puckman Pockimon (set 2)"
0.256: puckpkmn - "Puckman Pockimon Genie 2000"
Resolution, 0.153-0.212: 256x224 @ 60.000000Hz
Resolution, 0.213-0.256: 256x224 @ 59.922743Hz
Service Mode:
Service Mode reflects the local configuration after playback ends, not the recording. Service Mode is accessed by enabling the DIP Switch which can be toggled with the Service Mode Button (F2) followed by a reset thus cannot be recorded in an INP. A single, read-only, screen is shown dislaying the settings.
Default Settings:
MAME 0.106:
MAME 0.250:
From MAME 0.250 after entering service mode:
| 
MAME History:
- 0.251: Added Mega Drive I/O port controller device (sega\mdioport.cpp). Adapted all Mega Drive hardware drivers to work with the new I/O port device and moved based Mega Drive 68k peripherals to a common address map function. Created a light-weight base class with just the core functionality, used for "Genie" hardware (Puckman Pockimon). Moved built-in controller emulation to a derived class so it isn't lurking underneath the consoles with pluggable controllers. Moved YM sound out of "core" Mega Drive state and made more devices required in "base" Mega Drive state. Correct title [Vas Crabb]. Changed description of clone (set 2) to 'Jingling Jiazu' and (set 3) to 'Puckman Pockimon (set 2)'.
- 0.256: Made Puckman Pockimon set showing Sun Mixing copyright the parent [Vas Crabb]. Changed (set 1) to clone 'Puckman Pockimon Genie 2000 (bootleg)' and clones (set 2) to parent 'Puckman Pockimon Genie 2000' and 'Jingling Jiazu' to 'Jingling Jiazu Genie 2000'. Renamed (puckpkmn) to (puckpkmnb), (puckpkmnb) to (puckpkmn) and (puckpkmna) to (jingling).
Puckman Pockimon (set 1) / Puckman Pockimon Genie 2000 (bootleg)
----------------------
ROM set changed: yes.
0.106-0.139: puckpkmn - "Puckman Pockimon"
0.140-0.255: puckpkmn - "Puckman Pockimon (set 1)"
0.256: puckpkmnb - "Puckman Pockimon Genie 2000 (bootleg)"
Resolution, 0.106-0.134: 320x224 @ 60.000000Hz
Resolution, 0.135-0.212: 256x224 @ 60.000000Hz
Resolution, 0.213-0.256: 256x224 @ 59.922743Hz
TG Game Entry: https://www.twingalaxies.com/game/pu...pockimon/mame/
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=78989
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=78990
Puckman Pockimon (set 3) / (set 2) / Puckman Pockimon Genie 2000
----------------------
ROM set changed: yes.
0.106-0.152: NOT SUPPORTED
0.153-0.250: puckpkmnb - "Puckman Pockimon (set 3)"
0.251-0.255: puckpkmnb - "Puckman Pockimon (set 2)"
0.256: puckpkmn - "Puckman Pockimon Genie 2000"
Resolution, 0.153-0.212: 256x224 @ 60.000000Hz
Resolution, 0.213-0.256: 256x224 @ 59.922743Hz
Service Mode:
Service Mode reflects the local configuration after playback ends, not the recording. Service Mode is accessed by enabling the DIP Switch which can be toggled with the Service Mode Button (F2) followed by a reset thus cannot be recorded in an INP. A single, read-only, screen is shown dislaying the settings.
Default Settings:
MAME 0.106:
MAME 0.250:
From MAME 0.250 after entering service mode:
pulirula
ROM set changed: no
0.106-0.255: pulirula - "PuLiRuLa (World)"
MAME History:
- 0.143u3: Changed 'Unknown' dipswitches to 'Unused'.
Resolution, 0.106-0.255: 320x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/pulirula-world/mame/
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=21356
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=21357
Service Mode:
Typical Taito F2 BIOS.
Service Mode reflects the local configuration after playback ends, not the recording. Service Mode is accessed using Service button (F2) and then a reset must occur, thus cannot be recorded in an INP. A test screen appears initially and can be progressed with P1 Start button. The second screen is an input test screen with DIP switches shown in read-only binary form.
Default Settings:
From MAME 0.250 after entering service mode:
| 
0.106-0.255: pulirula - "PuLiRuLa (World)"
MAME History:
- 0.143u3: Changed 'Unknown' dipswitches to 'Unused'.
Resolution, 0.106-0.255: 320x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/pulirula-world/mame/
Rules, Points [Single Player Only]: https://www.twingalaxies.com/scores.php?scores=21356
Rules, Points [Two Player Team]: https://www.twingalaxies.com/scores.php?scores=21357
Service Mode:
Typical Taito F2 BIOS.
Service Mode reflects the local configuration after playback ends, not the recording. Service Mode is accessed using Service button (F2) and then a reset must occur, thus cannot be recorded in an INP. A test screen appears initially and can be progressed with P1 Start button. The second screen is an input test screen with DIP switches shown in read-only binary form.
Default Settings:
From MAME 0.250 after entering service mode:
pulsar
ROM set changed: no
0.106-0.250: pulsar - "Pulsar"
MAME History:
- 0.124u4: Aaron Giles fixed insert coin don't work in carnival, headon, heiankyo, pulsar, samurai and tranqgun.
- 0.147u1: Cleaned up Lives dipswitches. Added some DIP locations, fixed carnivalh/carnivalha too fast game speed and did minor cleanups to input ports. AM_RANGE(0x00, 0x1f) with a global mask of 0xf made no sense. Removed misplaced Irem 'Head On' PCB info, it already is on top of the m10.c driver where it belongs [hap]. Added some comments [gregf].
Resolution, 0.106-0.250: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/pulsar/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78991
Service Mode:
Typical Sega VIC Dual BIOS.
No service mode.
Default Settings:
MAME 0.106:
| MAME 0.250: 
MAME 0.106 through 0.147 defaults are for two tanks (one active, one spare).
Comparison of MAME 0.147 and 0.148 for DIP switch changes at 0.147u1:
0.106-0.250: pulsar - "Pulsar"
MAME History:
- 0.124u4: Aaron Giles fixed insert coin don't work in carnival, headon, heiankyo, pulsar, samurai and tranqgun.
- 0.147u1: Cleaned up Lives dipswitches. Added some DIP locations, fixed carnivalh/carnivalha too fast game speed and did minor cleanups to input ports. AM_RANGE(0x00, 0x1f) with a global mask of 0xf made no sense. Removed misplaced Irem 'Head On' PCB info, it already is on top of the m10.c driver where it belongs [hap]. Added some comments [gregf].
Resolution, 0.106-0.250: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/pulsar/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78991
Service Mode:
Typical Sega VIC Dual BIOS.
No service mode.
Default Settings:
MAME 0.106:
MAME 0.106 through 0.147 defaults are for two tanks (one active, one spare).
Comparison of MAME 0.147 and 0.148 for DIP switch changes at 0.147u1:
pulstar
ROM set changed: no
0.106-0.178: pulstar - "Pulstar"
MAME History:
- 0.113u2: Zsolt Vasvari updated NeoGeo driver to the new video timing code and screen raw parameters, this fixes also the messed up graphics. Changed VSync to 59.185606 Hz.
Resolution, 0.106-0.113: 320x224 @ 59.185608Hz
Resolution, 0.114-0.178: 320x224 @ 59.185606Hz
TG Game Entry: https://www.twingalaxies.com/scores....mename=Pulstar
Rules, Points: https://www.twingalaxies.com/scores.php?scores=15390
Service Mode:
Standard SNK NeoGeo BIOS.
All relevant rules are covered by internal settings. If not shown during playback, use F2 to access after playback completed. Navigation is with P1 Up & Down. Select menu option with P1 Button 1 and sub-menus can be exited with P1 Button 3. P1 Button 1 and P1 Button 2 adjust individual configuration options.
Default Settings:
0.106-0.178: pulstar - "Pulstar"
MAME History:
- 0.113u2: Zsolt Vasvari updated NeoGeo driver to the new video timing code and screen raw parameters, this fixes also the messed up graphics. Changed VSync to 59.185606 Hz.
Resolution, 0.106-0.113: 320x224 @ 59.185608Hz
Resolution, 0.114-0.178: 320x224 @ 59.185606Hz
TG Game Entry: https://www.twingalaxies.com/scores....mename=Pulstar
Rules, Points: https://www.twingalaxies.com/scores.php?scores=15390
Service Mode:
Standard SNK NeoGeo BIOS.
All relevant rules are covered by internal settings. If not shown during playback, use F2 to access after playback completed. Navigation is with P1 Up & Down. Select menu option with P1 Button 1 and sub-menus can be exited with P1 Button 3. P1 Button 1 and P1 Button 2 adjust individual configuration options.
Default Settings:
punchouta
ROM set changed: yes
0.106-0.154: punchout - "Punch-Out!!"
0.155-0.197: punchouta - "Punch-Out!! (Rev A)"
MAME History:
- 0.155: [2600] added Punch-Out!! (Rev B). Added missing RGB PROMs from the bottom and top monitor. Changed 'Punch-Out!!' to clone 'Punch-Out!! (Rev A)'. Renamed (punchout) to (punchouta).
Resolution, 0.106: 256x448 @ 60.000000Hz
Resolution, 0.107-0.197: 2 screens, both 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/punch-out/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=7793
0.106-0.154: punchout - "Punch-Out!!"
0.155-0.197: punchouta - "Punch-Out!! (Rev A)"
MAME History:
- 0.155: [2600] added Punch-Out!! (Rev B). Added missing RGB PROMs from the bottom and top monitor. Changed 'Punch-Out!!' to clone 'Punch-Out!! (Rev A)'. Renamed (punchout) to (punchouta).
Resolution, 0.106: 256x448 @ 60.000000Hz
Resolution, 0.107-0.197: 2 screens, both 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/punch-out/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=7793
punchout
Note: two ROM sets represented here with changeover at 0.155.
MAME History:
- 0.155: [2600] added Punch-Out!! (Rev B). Added missing RGB PROMs from the bottom and top monitor. Changed 'Punch-Out!!' to clone 'Punch-Out!! (Rev A)'. Renamed (punchout) to (punchouta).
Punch-Out!! (Rev A)
-------------------
ROM set changed: yes
0.106-0.154: punchout - "Punch-Out!!"
0.155-0.197: punchouta - "Punch-Out!! (Rev A)"
Resolution, 0.106: 256x448 @ 60.000000Hz
Resolution, 0.107-0.197: 2 screens, both 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/punch-out/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=7793
Punch-Out!! (Rev B)
-------------------
Note: not currently represented on TG.
ROM set changed: no. Added in 0.155.
0.155-0.197: punchout - "Punch-Out!! (Rev B)"
Resolution, 0.155-0.197: 2 screens, both 256x224 @ 60.000000Hz
Rules: [no current tracks]
MAME History:
- 0.155: [2600] added Punch-Out!! (Rev B). Added missing RGB PROMs from the bottom and top monitor. Changed 'Punch-Out!!' to clone 'Punch-Out!! (Rev A)'. Renamed (punchout) to (punchouta).
Punch-Out!! (Rev A)
-------------------
ROM set changed: yes
0.106-0.154: punchout - "Punch-Out!!"
0.155-0.197: punchouta - "Punch-Out!! (Rev A)"
Resolution, 0.106: 256x448 @ 60.000000Hz
Resolution, 0.107-0.197: 2 screens, both 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/punch-out/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=7793
Punch-Out!! (Rev B)
-------------------
Note: not currently represented on TG.
ROM set changed: no. Added in 0.155.
0.155-0.197: punchout - "Punch-Out!! (Rev B)"
Resolution, 0.155-0.197: 2 screens, both 256x224 @ 60.000000Hz
Rules: [no current tracks]
punisher
ROM set changed: no
0.106-0.255: punisher - "The Punisher (World 930422)"
MAME History:
- 0.121: Vas Crabb updated the DIP locations for all games in the CPS-1 driver.
- 0.126u4: Corrado Tomaselli verified and correct CPS1 refresh rate. Changed VSync to 59.610000 Hz.
- 0.147u1: Changed CPS-1 video timings to SCREEN_RAW_PARAMS [Angelo Salese]. Changed VSync to 59.629403 Hz.
- 0.153: Cleanup (includes\cps1.h) [Osso]. Willow, Strider and Ghouls'n Ghosts have some changed factory setting defaults as stated from manual. Also noted differences in bonus live coverage where applicable [Tafoid]. Cleanup QSound. No practical changes here except that i removed support for LOG_WAVE raw sound filewriting. Updated soundstream before writing (tsk). Reg 3 is key on. Small fix to sample start and loop. Guru measured qsound music timing. Modified CPS1 video params [hap]. Eliminate pointless planar-to-chunky conversion of gfx ROMs, just decode them as-is [Alex Jackson]. Changed VSync to 59.637405 Hz.
Resolution, 0.106-0.126: 384x224 @ 60.000000Hz
Resolution, 0.127-0.147: 384x224 @ 59.610000Hz
Resolution, 0.148-0.152: 384x224 @ 59.629403Hz
Resolution, 0.153-0.255: 384x224 @ 59.637405Hz
TG Game Entry: https://www.twingalaxies.com/game/th...d-930422/mame/
Rules, 1 Player: https://www.twingalaxies.com/scores.php?scores=14464
Rules, 2 Player: https://www.twingalaxies.com/scores.php?scores=14465
Service Mode:
Standard CPS-1 BIOS.
There are both hardware DIP switches & internal settings. Hardware DIP switches will reflect local configuration after playback, not the recording. Other relevant rules are covered by internal settings. Service Mode is accessed using the Game Mode DIP switch or the Service button (F2) which toggles the DIP switch. Navigation is with P1 Up and P1 Down, selection with P1 Button 1.
Default Settings:
MAME 0.106:
MAME 0.250:
BIOS:
0.106-0.255: punisher - "The Punisher (World 930422)"
MAME History:
- 0.121: Vas Crabb updated the DIP locations for all games in the CPS-1 driver.
- 0.126u4: Corrado Tomaselli verified and correct CPS1 refresh rate. Changed VSync to 59.610000 Hz.
- 0.147u1: Changed CPS-1 video timings to SCREEN_RAW_PARAMS [Angelo Salese]. Changed VSync to 59.629403 Hz.
- 0.153: Cleanup (includes\cps1.h) [Osso]. Willow, Strider and Ghouls'n Ghosts have some changed factory setting defaults as stated from manual. Also noted differences in bonus live coverage where applicable [Tafoid]. Cleanup QSound. No practical changes here except that i removed support for LOG_WAVE raw sound filewriting. Updated soundstream before writing (tsk). Reg 3 is key on. Small fix to sample start and loop. Guru measured qsound music timing. Modified CPS1 video params [hap]. Eliminate pointless planar-to-chunky conversion of gfx ROMs, just decode them as-is [Alex Jackson]. Changed VSync to 59.637405 Hz.
Resolution, 0.106-0.126: 384x224 @ 60.000000Hz
Resolution, 0.127-0.147: 384x224 @ 59.610000Hz
Resolution, 0.148-0.152: 384x224 @ 59.629403Hz
Resolution, 0.153-0.255: 384x224 @ 59.637405Hz
TG Game Entry: https://www.twingalaxies.com/game/th...d-930422/mame/
Rules, 1 Player: https://www.twingalaxies.com/scores.php?scores=14464
Rules, 2 Player: https://www.twingalaxies.com/scores.php?scores=14465
Service Mode:
Standard CPS-1 BIOS.
There are both hardware DIP switches & internal settings. Hardware DIP switches will reflect local configuration after playback, not the recording. Other relevant rules are covered by internal settings. Service Mode is accessed using the Game Mode DIP switch or the Service button (F2) which toggles the DIP switch. Navigation is with P1 Up and P1 Down, selection with P1 Button 1.
Default Settings:
MAME 0.106:
MAME 0.250:
BIOS:
punkshot
ROM set changed: no
0.106-0.255: punkshot - "Punk Shot (US 4 Players)"
MAME History:
- 0.143u8: Kanikani fixed DIPSW and added DIP locations to Punk Shot.
Resolution, 0.106-0.255: 288x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/pu...-players/mame/
Rulees, Biggest Blowout: https://www.twingalaxies.com/scores.php?scores=31207
Service Mode:
Typical "TMNT"-style hardware.
Service Mode reflects the local configuration after playback ends, not the recording. Service Mode is accessed by enabling the DIP Switch which can be toggled with the Service Mode Button (F2) followed by a reset thus cannot be recorded in an INP. A series of test screens are presented, progressing with P1 Start button. The test screens cycle while the Service Mode DIP switch remains enabled and are exited after the visual test pattern if not.
Default Settings:
From MAME 0.255 after entering service mode:
| 
0.106-0.255: punkshot - "Punk Shot (US 4 Players)"
MAME History:
- 0.143u8: Kanikani fixed DIPSW and added DIP locations to Punk Shot.
Resolution, 0.106-0.255: 288x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/pu...-players/mame/
Rulees, Biggest Blowout: https://www.twingalaxies.com/scores.php?scores=31207
Service Mode:
Typical "TMNT"-style hardware.
Service Mode reflects the local configuration after playback ends, not the recording. Service Mode is accessed by enabling the DIP Switch which can be toggled with the Service Mode Button (F2) followed by a reset thus cannot be recorded in an INP. A series of test screens are presented, progressing with P1 Start button. The test screens cycle while the Service Mode DIP switch remains enabled and are exited after the visual test pattern if not.
Default Settings:
From MAME 0.255 after entering service mode:
pururun
ROM set changed: no
0.106-0.175: pururun - "Pururun"
Resolution, 0.106-0.144: 320x224 @ 60.000000Hz
Resolution, 0.145-0.146: 320x240 @ 59.922743Hz
Resolution, 0.147-0.175: 320x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....mename=Pururun
0.106-0.175: pururun - "Pururun"
Resolution, 0.106-0.144: 320x224 @ 60.000000Hz
Resolution, 0.145-0.146: 320x240 @ 59.922743Hz
Resolution, 0.147-0.175: 320x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....mename=Pururun
puyopuy2
ROM set changed: no
0.106-0.175: puyopuy2 - "Puyo Puyo 2 (Japan)"
Resolution, 0.106-0.127: 320x224 @ 60.000000Hz
Resolution, 0.128-0.175: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....&gamename=Puyo Puyo 2 [Japan]
0.106-0.175: puyopuy2 - "Puyo Puyo 2 (Japan)"
Resolution, 0.106-0.127: 320x224 @ 60.000000Hz
Resolution, 0.128-0.175: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....&gamename=Puyo Puyo 2 [Japan]
puyosun
ROM set changed: no
0.106-0.255: puyosun - "Puyo Puyo Sun (J 961115 V0.001)"
MAME History:
- 0.131u3: Added dipswitches 'UNK' and 7x 'Unknown'.
- 0.133u1: Angelo Salese added screen raw parameters hook-up to the ST-V driver, fixes some of the current issues. Angelo Salese and Corrado Tomaselli hand-tuned ST-V pixel-clock to match measured fps from the PCB. Corrado Tomaselli verified and updated the vertical syncs on the ST-V motherboard. Changed visible area to 320x224 and VSync to 59.828244Hz.
- 0.142u5: More accurate pixel clocks for Sega Saturn / ST-V [Angelo Salese]. Angelo Salese fixed an ST-V window effect bug when it's in double interlace mode, fixes a graphic bug with Virtual Mahjong. Fixed a rather silly bug with SCU DSP execute flag. Oliver Stoeneberg fixed Sega Saturn / ST-V start-up crash that was happening on some ends. Added accurate hblank durations to Sega Saturn / ST-V HW [Angelo Salese, Corrado Tomaselli, Charles MacDonald]. Angelo Salese moved SMPC intback command inside a timer, removes a kludge for SMPC mask irq. Angelo Salese fixed emulation hangs in Pebble Beach and Funky Head Boxers. Fixed a rather silly bug with SCU DSP execute flag. Moved SMPC intback command inside a timer, removes a kludge for SMPC mask irq. Added CD/DA audio and changed VSync to 59.826048 Hz.
- 0.143: Changed SH-2 CPU1/2 clock speed to 28636360 Hz, 68000 CPU3 to 11289600 Hz and VSync to 59.764793 Hz.
- 0.180: Added audio\rax.cpp/h. Emulated the Acclaim RAX sound board, fixing sound in Batman Forever [Phil Bennett]. Worked around VDP1 timings in Sega Saturn, fixes regression with (MESS) Batman Forever gameplay speed (video\stvvdp1.cpp). Added Rotation Parameter read control register, fixes at least Riddler stage ROZ positioning in Batman Forever (video\stvvdp2.cpp) [Angelo Salese]. Changed the SH2 disassemblers to use 'std::ostream &' internally [AJR]. Changed visible area to 352x224.
- 0.214: Added machine\segabill.cpp/h, layout\segabill.lay and layout\segabillv.lay. Emulated the Sega Billboard and hook it up to the STV driver. It's not shown by default. To view it, choose the layout view 'Billboard'. YouTube: https://youtu.be/csuOJBU5rzo [biggestsonicfan, Dirk Best]. Added Z80 (8MHz) CPU5. Added dipswitches 'Test Winner LED P1/2', 'Test 7-Segment P1/2', 'Demo', 'Testmode' and 2x 'Unknown'.
Resolution, 0.106-0.128: 704x513 @ 60.000000Hz
Resolution, 0.129-0.133: 704x512 @ 60.000000Hz
Resolution, 0.134-0.142: 320x224 @ 59.828244Hz
Resolution, 0.143-0.179: 320x224 @ 59.764793Hz
Resolution, 0.180-0.193: 352x224 @ 59.764793Hz
Resolution, 0.194-0.255: 352x224 @ 59.764802Hz
TG Game Entry: https://www.twingalaxies.com/game/pu...15-v0001/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78994
Service Mode:
Standard ST-V BIOS.
Service Mode is accessed with the Service Button (F2). Navigation is with the Test (9) button and selection is with the Service Button. Each cartridge has a separate interface from the ST-V BIOS and its own navigation changes with the cart implementation: instructions on screen.
Default Settings:
MAME 0.106:
MAME 0.250:
STV BIOS: |
Cartridge:
0.106-0.255: puyosun - "Puyo Puyo Sun (J 961115 V0.001)"
MAME History:
- 0.131u3: Added dipswitches 'UNK' and 7x 'Unknown'.
- 0.133u1: Angelo Salese added screen raw parameters hook-up to the ST-V driver, fixes some of the current issues. Angelo Salese and Corrado Tomaselli hand-tuned ST-V pixel-clock to match measured fps from the PCB. Corrado Tomaselli verified and updated the vertical syncs on the ST-V motherboard. Changed visible area to 320x224 and VSync to 59.828244Hz.
- 0.142u5: More accurate pixel clocks for Sega Saturn / ST-V [Angelo Salese]. Angelo Salese fixed an ST-V window effect bug when it's in double interlace mode, fixes a graphic bug with Virtual Mahjong. Fixed a rather silly bug with SCU DSP execute flag. Oliver Stoeneberg fixed Sega Saturn / ST-V start-up crash that was happening on some ends. Added accurate hblank durations to Sega Saturn / ST-V HW [Angelo Salese, Corrado Tomaselli, Charles MacDonald]. Angelo Salese moved SMPC intback command inside a timer, removes a kludge for SMPC mask irq. Angelo Salese fixed emulation hangs in Pebble Beach and Funky Head Boxers. Fixed a rather silly bug with SCU DSP execute flag. Moved SMPC intback command inside a timer, removes a kludge for SMPC mask irq. Added CD/DA audio and changed VSync to 59.826048 Hz.
- 0.143: Changed SH-2 CPU1/2 clock speed to 28636360 Hz, 68000 CPU3 to 11289600 Hz and VSync to 59.764793 Hz.
- 0.180: Added audio\rax.cpp/h. Emulated the Acclaim RAX sound board, fixing sound in Batman Forever [Phil Bennett]. Worked around VDP1 timings in Sega Saturn, fixes regression with (MESS) Batman Forever gameplay speed (video\stvvdp1.cpp). Added Rotation Parameter read control register, fixes at least Riddler stage ROZ positioning in Batman Forever (video\stvvdp2.cpp) [Angelo Salese]. Changed the SH2 disassemblers to use 'std::ostream &' internally [AJR]. Changed visible area to 352x224.
- 0.214: Added machine\segabill.cpp/h, layout\segabill.lay and layout\segabillv.lay. Emulated the Sega Billboard and hook it up to the STV driver. It's not shown by default. To view it, choose the layout view 'Billboard'. YouTube: https://youtu.be/csuOJBU5rzo [biggestsonicfan, Dirk Best]. Added Z80 (8MHz) CPU5. Added dipswitches 'Test Winner LED P1/2', 'Test 7-Segment P1/2', 'Demo', 'Testmode' and 2x 'Unknown'.
Resolution, 0.106-0.128: 704x513 @ 60.000000Hz
Resolution, 0.129-0.133: 704x512 @ 60.000000Hz
Resolution, 0.134-0.142: 320x224 @ 59.828244Hz
Resolution, 0.143-0.179: 320x224 @ 59.764793Hz
Resolution, 0.180-0.193: 352x224 @ 59.764793Hz
Resolution, 0.194-0.255: 352x224 @ 59.764802Hz
TG Game Entry: https://www.twingalaxies.com/game/pu...15-v0001/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78994
Service Mode:
Standard ST-V BIOS.
Service Mode is accessed with the Service Button (F2). Navigation is with the Test (9) button and selection is with the Service Button. Each cartridge has a separate interface from the ST-V BIOS and its own navigation changes with the cart implementation: instructions on screen.
Default Settings:
MAME 0.106:
MAME 0.250:
STV BIOS:
Cartridge:
puyo
ROM set changed: no
0.106-0.197: puyo - "Puyo Puyo (World)"
Resolution, 0.106-0.127: 320x224 @ 60.000000Hz
Resolution, 0.128-0.197: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/puyo-puyo-world/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78992
0.106-0.197: puyo - "Puyo Puyo (World)"
Resolution, 0.106-0.127: 320x224 @ 60.000000Hz
Resolution, 0.128-0.197: 256x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/game/puyo-puyo-world/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=78992
puzlclub
ROM set changed: no
0.106-0.175: puzlclub - "Puzzle Club (Japan prototype)"
Resolution, 0.106-0.152: 288x224 @ 60.606060Hz
Resolution, 0.153-0.175: 288x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/scores....amename=Puzzle Club [Japan Prototype]
0.106-0.175: puzlclub - "Puzzle Club (Japan prototype)"
Resolution, 0.106-0.152: 288x224 @ 60.606060Hz
Resolution, 0.153-0.175: 288x224 @ 60.606061Hz
TG Game Entry: https://www.twingalaxies.com/scores....amename=Puzzle Club [Japan Prototype]
puzldama
ROM set changed: no
0.106-0.255: puzldama - "Taisen Puzzle-dama (ver JAA)"
MAME History:
- 0.125u6: KonamiGX frequency tweaks [Yasuhiro Ogawa]: Set screen refresh rate to 58Hz (parameters from developer manual are not 100% correct). Removed sound CPU clock hack. Changed 68000 CPU2 clock speed to 8MHz.
- 0.125u7: GX era hardware [Yasuhiro Ogawa]: Update video parameters to use actual values written to the CCU. Changed VSync to 59.185606.
Resolution, 0.106: 288x224 @ 58.000000Hz
Resolution, 0.107-0.125: 288x224 @ 60.000000Hz
Resolution, 0.126-0.255: 288x224 @ 59.185606Hz
TG Game Entry: https://www.twingalaxies.com/game/ta...-ver-jaa/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=120332
Service Mode:
Standard Konami GX BIOS.
Has both hardware DIP switches and internal software service mode. Hardware DIP switches will reflect the local configuration after playback ends, not the recording. All other relevant rules are covered by internal settings. Service Mode is access using the Service button (F2). Navigation is with P1 Up and Down, selection with P1 Button 1.
Default Settings:
MAME Note:
- Please note that EVERY TIME you run this game, you need to do a F2+F3 (hold both keys) procedure. This is a result of issues with the TMS emulation. The EEPROM image is correct but the system does not recognize this fact.
MAME 0.106 DIP Switches:
| 
MAME 0.250 DIP Switches:
| 
Internal Configuration:
| 
0.106-0.255: puzldama - "Taisen Puzzle-dama (ver JAA)"
MAME History:
- 0.125u6: KonamiGX frequency tweaks [Yasuhiro Ogawa]: Set screen refresh rate to 58Hz (parameters from developer manual are not 100% correct). Removed sound CPU clock hack. Changed 68000 CPU2 clock speed to 8MHz.
- 0.125u7: GX era hardware [Yasuhiro Ogawa]: Update video parameters to use actual values written to the CCU. Changed VSync to 59.185606.
Resolution, 0.106: 288x224 @ 58.000000Hz
Resolution, 0.107-0.125: 288x224 @ 60.000000Hz
Resolution, 0.126-0.255: 288x224 @ 59.185606Hz
TG Game Entry: https://www.twingalaxies.com/game/ta...-ver-jaa/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=120332
Service Mode:
Standard Konami GX BIOS.
Has both hardware DIP switches and internal software service mode. Hardware DIP switches will reflect the local configuration after playback ends, not the recording. All other relevant rules are covered by internal settings. Service Mode is access using the Service button (F2). Navigation is with P1 Up and Down, selection with P1 Button 1.
Default Settings:
MAME Note:
- Please note that EVERY TIME you run this game, you need to do a F2+F3 (hold both keys) procedure. This is a result of issues with the TMS emulation. The EEPROM image is correct but the system does not recognize this fact.
MAME 0.106 DIP Switches:
MAME 0.250 DIP Switches:
Internal Configuration:
puzlstara, puzlstar
Note: two ROM sets represented here with changeover at 0.224
MAME History:
- 0.130u3: Changed description to 'Puzzle Star (ver. 100MG)'.
- 0.145u5: Changed VSync to 59.17 Hz.
- 0.198: Changed description to 'Puzzle Star / Mohuan Xingzuo (ver. 100MG)'.
- 0.212: Changed VSync to 60Hz.
- 0.223: Simulated 'Photo Y2K 2' sprite offset decode (machine\pgmprot_igs027a_type1.cpp) and promoted game to working [iq_132, dink]. Support for V3021 RTC serial interface. Implemented RAM and address commands. Use device_rtc_interface for RTC handling (machine\v3021.cpp). Use struct for sprites and raw parameters for screen. Fixed timing of intro sequences in some games. Use generic gfx layout for foreground. Moved VBlank IRQ into screen_vblank. Reduced duplicates. Added notes [cam900]. Changed VSync to 59.185606 Hz.
- 0.224: GC8TECH.COM and Team FBNeo added Puzzle Star / Mohuan Xingzuo (ver. 100MG, 09/30/99 build). Changed (ver. 100MG) to clone 'Puzzle Star / Mohuan Xingzuo (ver. 100MG, 09/20/99 build)'. Renamed (puzlstar) to (puzlstara).
Puzzle Star / Mohuan Xingzuo (ver. 100MG, 09/20/99 build)
---------------------------------------------------------
ROM set changed: yes
0.106-0.130: puzlstar - "Puzzle Star"
0.130u3-0.197: puzlstar - "Puzzle Star (ver. 100MG)"
0.198-0.223: puzlstar - "Puzzle Star / Mohuan Xingzuo (ver. 100MG)"
0.224-0.255: puzlstara - "Puzzle Star / Mohuan Xingzuo (ver. 100MG, 09/20/99 build)"
Resolution, 0.106-0.145: 448x224 @ 60.000000Hz
Resolution, 0.146-0.211: 448x224 @ 59.170000Hz
Resolution, 0.212-0.222: 448x224 @ 60.000000Hz
Resolution, 0.223-0.255: 448x224 @ 59.185606Hz
TG Game Entry: https://www.twingalaxies.com/game/puzzle-star/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=79020
Puzzle Star / Mohuan Xingzuo (ver. 100MG, 09/30/99 build)
---------------------------------------------------------
Note: not currently represented on TG.
ROM set changed: no. Added in 0.224.
0.224-0.255: puzlstar - "Puzzle Star / Mohuan Xingzuo (ver. 100MG, 09/30/99 build)"
Resolution, 0.224-0.255: 448x224 @ 59.185606Hz
Rules: [no current tracks]
Service Mode:
Typical IGS PolyGame Master BIOS.
There are both hardware DIP switches & internal settings. Hardware DIP switches and internal settings will reflect local configuration after playback, not the recording. Service Mode is accessed via the DIP Switch which is toggled with the Service button (F2) and requires a reset thus cannot be recorded in an INP. Navigation is with P1 Up and Down, selection with P1 Button 1.
Default Settings:
| 
| 
| 
MAME History:
- 0.130u3: Changed description to 'Puzzle Star (ver. 100MG)'.
- 0.145u5: Changed VSync to 59.17 Hz.
- 0.198: Changed description to 'Puzzle Star / Mohuan Xingzuo (ver. 100MG)'.
- 0.212: Changed VSync to 60Hz.
- 0.223: Simulated 'Photo Y2K 2' sprite offset decode (machine\pgmprot_igs027a_type1.cpp) and promoted game to working [iq_132, dink]. Support for V3021 RTC serial interface. Implemented RAM and address commands. Use device_rtc_interface for RTC handling (machine\v3021.cpp). Use struct for sprites and raw parameters for screen. Fixed timing of intro sequences in some games. Use generic gfx layout for foreground. Moved VBlank IRQ into screen_vblank. Reduced duplicates. Added notes [cam900]. Changed VSync to 59.185606 Hz.
- 0.224: GC8TECH.COM and Team FBNeo added Puzzle Star / Mohuan Xingzuo (ver. 100MG, 09/30/99 build). Changed (ver. 100MG) to clone 'Puzzle Star / Mohuan Xingzuo (ver. 100MG, 09/20/99 build)'. Renamed (puzlstar) to (puzlstara).
Puzzle Star / Mohuan Xingzuo (ver. 100MG, 09/20/99 build)
---------------------------------------------------------
ROM set changed: yes
0.106-0.130: puzlstar - "Puzzle Star"
0.130u3-0.197: puzlstar - "Puzzle Star (ver. 100MG)"
0.198-0.223: puzlstar - "Puzzle Star / Mohuan Xingzuo (ver. 100MG)"
0.224-0.255: puzlstara - "Puzzle Star / Mohuan Xingzuo (ver. 100MG, 09/20/99 build)"
Resolution, 0.106-0.145: 448x224 @ 60.000000Hz
Resolution, 0.146-0.211: 448x224 @ 59.170000Hz
Resolution, 0.212-0.222: 448x224 @ 60.000000Hz
Resolution, 0.223-0.255: 448x224 @ 59.185606Hz
TG Game Entry: https://www.twingalaxies.com/game/puzzle-star/mame/
Rules, Points: https://www.twingalaxies.com/scores.php?scores=79020
Puzzle Star / Mohuan Xingzuo (ver. 100MG, 09/30/99 build)
---------------------------------------------------------
Note: not currently represented on TG.
ROM set changed: no. Added in 0.224.
0.224-0.255: puzlstar - "Puzzle Star / Mohuan Xingzuo (ver. 100MG, 09/30/99 build)"
Resolution, 0.224-0.255: 448x224 @ 59.185606Hz
Rules: [no current tracks]
Service Mode:
Typical IGS PolyGame Master BIOS.
There are both hardware DIP switches & internal settings. Hardware DIP switches and internal settings will reflect local configuration after playback, not the recording. Service Mode is accessed via the DIP Switch which is toggled with the Service button (F2) and requires a reset thus cannot be recorded in an INP. Navigation is with P1 Up and Down, selection with P1 Button 1.
Default Settings:
puzzledp
ROM set changed: no
0.106-0.224: puzzledp - "Puzzle De Pon!"
Resolution, 0.106-0.113: 320x224 @ 59.185608Hz
Resolution, 0.114-0.224: 320x224 @ 59.185606Hz
TG Game Entry: https://www.twingalaxies.com/game/puzzle-de-pon/mame
Rules, Points [1 Player Mode]: https://www.twingalaxies.com/scores.php?scores=9809
0.106-0.224: puzzledp - "Puzzle De Pon!"
Resolution, 0.106-0.113: 320x224 @ 59.185608Hz
Resolution, 0.114-0.224: 320x224 @ 59.185606Hz
TG Game Entry: https://www.twingalaxies.com/game/puzzle-de-pon/mame
Rules, Points [1 Player Mode]: https://www.twingalaxies.com/scores.php?scores=9809
puzzlekg
ROM set changed: no
0.106-0.175: puzzlekg - "Puzzle King (Dance & Puzzle)"
Resolution, 0.106-0.175: 320x240 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....zzle%20King%20[Dance%20%26%20Puzzle]
Rules, Points: https://www.twingalaxies.com/scores.php?scores=79019
Note: If not shown during gameplay, can access Service Mode (F2) to show Level (no navigation required).
0.106-0.175: puzzlekg - "Puzzle King (Dance & Puzzle)"
Resolution, 0.106-0.175: 320x240 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....zzle%20King%20[Dance%20%26%20Puzzle]
Rules, Points: https://www.twingalaxies.com/scores.php?scores=79019
Note: If not shown during gameplay, can access Service Mode (F2) to show Level (no navigation required).
puzzli
ROM set changed: no
0.106-0.175: puzzli - "Puzzli"
Resolution, 0.106-0.144: 320x224 @ 58.000000Hz
Resolution, 0.145-0.146: 320x240 @ 59.922743Hz
Resolution, 0.147-0.175: 320x224 @ 58.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....amename=Puzzli
0.106-0.175: puzzli - "Puzzli"
Resolution, 0.106-0.144: 320x224 @ 58.000000Hz
Resolution, 0.145-0.146: 320x240 @ 59.922743Hz
Resolution, 0.147-0.175: 320x224 @ 58.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....amename=Puzzli
puzzloope
ROM set changed: yes
0.106-0.143: puzzloop - "Puzz Loop (Europe)"
0.143u4-0.175: puzzloope - "Puzz Loop (Europe, v0.93)"
MAME History:
- 0.143u4: Joerg Hartenberger added Puzz Loop (Europe, v0.94). Changed 'Puzz Loop (Europe)' to clone 'Puzz Loop (Europe, v0.93)'. Renamed (puzzloop) to (puzzloope).
Resolution, 0.106-0.125: 320x240 @ 60.000000Hz
Resolution, 0.126-0.175: 320x240 @ 59.597100Hz
TG Game Entry: https://www.twingalaxies.com/scores....Puzz%20Loop%20[Europe]
Rules, Points [Panic Mode]: https://www.twingalaxies.com/scores.php?scores=32343
Rules, Points [Stage Mode]: https://www.twingalaxies.com/scores.php?scores=32344
0.106-0.143: puzzloop - "Puzz Loop (Europe)"
0.143u4-0.175: puzzloope - "Puzz Loop (Europe, v0.93)"
MAME History:
- 0.143u4: Joerg Hartenberger added Puzz Loop (Europe, v0.94). Changed 'Puzz Loop (Europe)' to clone 'Puzz Loop (Europe, v0.93)'. Renamed (puzzloop) to (puzzloope).
Resolution, 0.106-0.125: 320x240 @ 60.000000Hz
Resolution, 0.126-0.175: 320x240 @ 59.597100Hz
TG Game Entry: https://www.twingalaxies.com/scores....Puzz%20Loop%20[Europe]
Rules, Points [Panic Mode]: https://www.twingalaxies.com/scores.php?scores=32343
Rules, Points [Stage Mode]: https://www.twingalaxies.com/scores.php?scores=32344
puzzloop
Note: two ROM sets represented here with changeover at
MAME History:
- 0.143u4: Joerg Hartenberger added Puzz Loop (Europe, v0.94). Changed 'Puzz Loop (Europe)' to clone 'Puzz Loop (Europe, v0.93)'. Renamed (puzzloop) to (puzzloope).
Puzz Loop (Europe, v0.93)
-------------------------
ROM set changed: yes
0.106-0.143: puzzloop - "Puzz Loop (Europe)"
0.143u4-0.175: puzzloope - "Puzz Loop (Europe, v0.93)"
Resolution, 0.106-0.125: 320x240 @ 60.000000Hz
Resolution, 0.126-0.175: 320x240 @ 59.597100Hz
TG Game Entry: https://www.twingalaxies.com/scores....Puzz%20Loop%20[Europe]
Rules, Points [Panic Mode]: https://www.twingalaxies.com/scores.php?scores=32343
Rules, Points [Stage Mode]: https://www.twingalaxies.com/scores.php?scores=32344
Puzz Loop (Europe, v0.94)
-------------------------
Note: not currently represented on TG.
ROM set changed: no. Added in 0.144.
0.144-0.176: puzzloop - "Puzz Loop (Europe, v0.94)"
Resolution, 0.144-0.176: 320x240 @ 59.597100Hz
Rules: [no current tracks]
MAME History:
- 0.143u4: Joerg Hartenberger added Puzz Loop (Europe, v0.94). Changed 'Puzz Loop (Europe)' to clone 'Puzz Loop (Europe, v0.93)'. Renamed (puzzloop) to (puzzloope).
Puzz Loop (Europe, v0.93)
-------------------------
ROM set changed: yes
0.106-0.143: puzzloop - "Puzz Loop (Europe)"
0.143u4-0.175: puzzloope - "Puzz Loop (Europe, v0.93)"
Resolution, 0.106-0.125: 320x240 @ 60.000000Hz
Resolution, 0.126-0.175: 320x240 @ 59.597100Hz
TG Game Entry: https://www.twingalaxies.com/scores....Puzz%20Loop%20[Europe]
Rules, Points [Panic Mode]: https://www.twingalaxies.com/scores.php?scores=32343
Rules, Points [Stage Mode]: https://www.twingalaxies.com/scores.php?scores=32344
Puzz Loop (Europe, v0.94)
-------------------------
Note: not currently represented on TG.
ROM set changed: no. Added in 0.144.
0.144-0.176: puzzloop - "Puzz Loop (Europe, v0.94)"
Resolution, 0.144-0.176: 320x240 @ 59.597100Hz
Rules: [no current tracks]
puzznic
ROM set changed: no
0.106-0.175: puzznic - "Puzznic (World)"
Resolution, 0.106-0.175: 320x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....mename=Puzznic [World]
0.106-0.175: puzznic - "Puzznic (World)"
Resolution, 0.106-0.175: 320x224 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....mename=Puzznic [World]
pwrgoal
ROM set changed: no
0.106-0.250: pwrgoal - "Taito Power Goal (Ver 2.5O 1994/11/03)"
MAME History:
- 0.113u2: Changed VSync to 58.970000 Hz.
Resolution, 0.106-0.113: 320x224 @ 58.970001Hz
Resolution, 0.114-0.250: 320x224 @ 58.970000Hz
TG Game Entry: https://www.twingalaxies.com/game/ta...94-11-03/mame/
Rules, Biggest Blowout: https://www.twingalaxies.com/scores.php?scores=120335
Service Mode:
Typical Taito F3 BIOS.
All relevant rules are covered by internal settings. Service Mode can be accessed using the Service button (F2). Navigate with P1 Up and Down. Select menu options with P1 Button 1. Change settings with P1 Left and Right.
Default Settings:
0.106-0.250: pwrgoal - "Taito Power Goal (Ver 2.5O 1994/11/03)"
MAME History:
- 0.113u2: Changed VSync to 58.970000 Hz.
Resolution, 0.106-0.113: 320x224 @ 58.970001Hz
Resolution, 0.114-0.250: 320x224 @ 58.970000Hz
TG Game Entry: https://www.twingalaxies.com/game/ta...94-11-03/mame/
Rules, Biggest Blowout: https://www.twingalaxies.com/scores.php?scores=120335
Service Mode:
Typical Taito F3 BIOS.
All relevant rules are covered by internal settings. Service Mode can be accessed using the Service button (F2). Navigate with P1 Up and Down. Select menu options with P1 Button 1. Change settings with P1 Left and Right.
Default Settings:
pwrinst2a, pwrinst2
Note: two ROM sets represented here with changeover at 0.251.
MAME History:
- 0.113u2: Changed VSync to 57.550645 Hz.
- 0.122: Changed description to 'Power Instinct 2 (US, Ver. 94/04/08)' and clone 'Gouketsuji Ichizoku 2 (Japan)' to 'Gouketsuji Ichizoku 2 (Japan, Ver. 94/04/08)'.
- 0.241: Changed description to 'Power Instinct 2 (US, Ver. 94.04.08)' and clone (Japan, Ver. 94/04/08) to 'Gouketsuji Ichizoku 2 (Japan, Ver. 94.04.08)'.
- 0.251: Sergio Galiano and Recreativos Piscis added Power Instinct 2 (US, Ver. 94.04.08, set 1). Sergio also added PLD dumps for Power Instinct 2 and clone. Changed (US, Ver. 94.04.08) to clone 'Power Instinct 2 (US, Ver. 94.04.08, set 2)'. Renamed (pwrinst2) to (pwrinst2a).
Power Instinct 2 (US, Ver. 94.04.08, set 2)
-------------------------------------------
ROM set changed: yes
0.106-0.121: pwrinst2 - "Power Instinct 2 (USA)"
0.122-0.240: pwrinst2 - "Power Instinct 2 (US, Ver. 94/04/08)"
0.241-0.250: pwrinst2 - "Power Instinct 2 (US, Ver. 94.04.08)"
0.251-0.255: pwrinst2a - "Power Instinct 2 (US, Ver. 94.04.08, set 2)"
Resolution, 0.106-0.113: 320x240 @ 57.550644Hz
Resolution, 0.114-0.255: 320x240 @ 57.550645Hz
TG Game Entry: https://www.twingalaxies.com/game/po...ct-2-usa/mame/
Rules, Points [Tournament Settings]: https://www.twingalaxies.com/scores.php?scores=78959
Power Instinct 2 (US, Ver. 94.04.08, set 1)
-------------------------------------------
Note: not currently represented on TG.
ROM set changed: no. Added in 0.251.
0.251-0.255: pwrinst2 - "Power Instinct 2 (US, Ver. 94.04.08, set 1)"
Resolution, 0.251-0.255: 320x240 @ 57.550645Hz
Rules: [no current tracks]
Boot Up:
Without any NVRAM a red notice should appear at the bottom of the first screen indicating:
"FIRST BOOT UP IS.
FLASH EEP ROM DEFAULT INITIALIZED."
Service Mode:
Typical Cave (Motorola 68000) BIOS
All relevant rules are covered by internal settings. If not shown during playback, hold the Service button (F2) to access after playback completed. Navigation is with P1 Up & Down, selection is with P1 Button 1.
Default Settings:
| 
MAME History:
- 0.113u2: Changed VSync to 57.550645 Hz.
- 0.122: Changed description to 'Power Instinct 2 (US, Ver. 94/04/08)' and clone 'Gouketsuji Ichizoku 2 (Japan)' to 'Gouketsuji Ichizoku 2 (Japan, Ver. 94/04/08)'.
- 0.241: Changed description to 'Power Instinct 2 (US, Ver. 94.04.08)' and clone (Japan, Ver. 94/04/08) to 'Gouketsuji Ichizoku 2 (Japan, Ver. 94.04.08)'.
- 0.251: Sergio Galiano and Recreativos Piscis added Power Instinct 2 (US, Ver. 94.04.08, set 1). Sergio also added PLD dumps for Power Instinct 2 and clone. Changed (US, Ver. 94.04.08) to clone 'Power Instinct 2 (US, Ver. 94.04.08, set 2)'. Renamed (pwrinst2) to (pwrinst2a).
Power Instinct 2 (US, Ver. 94.04.08, set 2)
-------------------------------------------
ROM set changed: yes
0.106-0.121: pwrinst2 - "Power Instinct 2 (USA)"
0.122-0.240: pwrinst2 - "Power Instinct 2 (US, Ver. 94/04/08)"
0.241-0.250: pwrinst2 - "Power Instinct 2 (US, Ver. 94.04.08)"
0.251-0.255: pwrinst2a - "Power Instinct 2 (US, Ver. 94.04.08, set 2)"
Resolution, 0.106-0.113: 320x240 @ 57.550644Hz
Resolution, 0.114-0.255: 320x240 @ 57.550645Hz
TG Game Entry: https://www.twingalaxies.com/game/po...ct-2-usa/mame/
Rules, Points [Tournament Settings]: https://www.twingalaxies.com/scores.php?scores=78959
Power Instinct 2 (US, Ver. 94.04.08, set 1)
-------------------------------------------
Note: not currently represented on TG.
ROM set changed: no. Added in 0.251.
0.251-0.255: pwrinst2 - "Power Instinct 2 (US, Ver. 94.04.08, set 1)"
Resolution, 0.251-0.255: 320x240 @ 57.550645Hz
Rules: [no current tracks]
Boot Up:
Without any NVRAM a red notice should appear at the bottom of the first screen indicating:
"FIRST BOOT UP IS.
FLASH EEP ROM DEFAULT INITIALIZED."
Service Mode:
Typical Cave (Motorola 68000) BIOS
All relevant rules are covered by internal settings. If not shown during playback, hold the Service button (F2) to access after playback completed. Navigation is with P1 Up & Down, selection is with P1 Button 1.
Default Settings:
pzlbowl
ROM set changed: no
0.106-0.175: pzlbowl - "Puzzle De Bowling (Japan)"
Resolution, 0.106-0.175: 384x240 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....amename=Puzzle De Bowling [Japan]
0.106-0.175: pzlbowl - "Puzzle De Bowling (Japan)"
Resolution, 0.106-0.175: 384x240 @ 60.000000Hz
TG Game Entry: https://www.twingalaxies.com/scores....amename=Puzzle De Bowling [Japan]
pzloop2jr1
ROM set changed: yes
0.106-0.145: pzloop2j - "Puzz Loop 2 (Japan 010205)"
0.145u2-0.175: pzloop2jr1 - "Puzz Loop 2 (Japan 010205)"
MAME History:
- 0.145u2: idc/Team Avalaunch added clone Puzz Loop 2 (Japan 010226). Renamed (pzloop2j) to (pzloop2jr1).
Resolution, 0.106-0.113: 384x224 @ 59.633331Hz
Resolution, 0.114-0.127: 384x224 @ 59.633333Hz
Resolution, 0.128-0.152: 384x224 @ 59.629403Hz
Resolution, 0.153-0.175: 384x224 @ 59.637405Hz
TG Game Entry: https://www.twingalaxies.com/scores....%20Loop%202%20[Japan%20010205]
Rules, Points [Power Mode]: https://www.twingalaxies.com/scores.php?scores=78995
Rules, Points [Stage Mode]: https://www.twingalaxies.com/scores.php?scores=78996
Rules, Points [Tokoton Mode]: https://www.twingalaxies.com/scores.php?scores=78997
0.106-0.145: pzloop2j - "Puzz Loop 2 (Japan 010205)"
0.145u2-0.175: pzloop2jr1 - "Puzz Loop 2 (Japan 010205)"
MAME History:
- 0.145u2: idc/Team Avalaunch added clone Puzz Loop 2 (Japan 010226). Renamed (pzloop2j) to (pzloop2jr1).
Resolution, 0.106-0.113: 384x224 @ 59.633331Hz
Resolution, 0.114-0.127: 384x224 @ 59.633333Hz
Resolution, 0.128-0.152: 384x224 @ 59.629403Hz
Resolution, 0.153-0.175: 384x224 @ 59.637405Hz
TG Game Entry: https://www.twingalaxies.com/scores....%20Loop%202%20[Japan%20010205]
Rules, Points [Power Mode]: https://www.twingalaxies.com/scores.php?scores=78995
Rules, Points [Stage Mode]: https://www.twingalaxies.com/scores.php?scores=78996
Rules, Points [Tokoton Mode]: https://www.twingalaxies.com/scores.php?scores=78997
pzloop2j
Note: two ROM sets currently represented here with changeover at 0.145u2.
MAME History:
- 0.145u2: idc/Team Avalaunch added clone Puzz Loop 2 (Japan 010226). Renamed (pzloop2j) to (pzloop2jr1).
Puzz Loop 2 (Japan 010205)
--------------------------
ROM set changed: yes
0.106-0.145: pzloop2j - "Puzz Loop 2 (Japan 010205)"
0.145u2-0.175: pzloop2jr1 - "Puzz Loop 2 (Japan 010205)"
Resolution, 0.106-0.113: 384x224 @ 59.633331Hz
Resolution, 0.114-0.127: 384x224 @ 59.633333Hz
Resolution, 0.128-0.152: 384x224 @ 59.629403Hz
Resolution, 0.153-0.175: 384x224 @ 59.637405Hz
TG Game Entry: https://www.twingalaxies.com/scores....%20Loop%202%20[Japan%20010205]
Rules, Points [Power Mode]: https://www.twingalaxies.com/scores.php?scores=78995
Rules, Points [Stage Mode]: https://www.twingalaxies.com/scores.php?scores=78996
Rules, Points [Tokoton Mode]: https://www.twingalaxies.com/scores.php?scores=78997
Puzz Loop 2 (Japan 010226)
--------------------------
Note: not currently represented on TG.
ROM set changed: no. Added in 0.145u2.
0.145u2-0.176: pzloop2j - "Puzz Loop 2 (Japan 010226)"
Resolution, 0.146-0.152: 384x224 @ 59.629403Hz
Resolution, 0.153-0.176: 384x224 @ 59.637405Hz
Rules: [no current tracks]
MAME History:
- 0.145u2: idc/Team Avalaunch added clone Puzz Loop 2 (Japan 010226). Renamed (pzloop2j) to (pzloop2jr1).
Puzz Loop 2 (Japan 010205)
--------------------------
ROM set changed: yes
0.106-0.145: pzloop2j - "Puzz Loop 2 (Japan 010205)"
0.145u2-0.175: pzloop2jr1 - "Puzz Loop 2 (Japan 010205)"
Resolution, 0.106-0.113: 384x224 @ 59.633331Hz
Resolution, 0.114-0.127: 384x224 @ 59.633333Hz
Resolution, 0.128-0.152: 384x224 @ 59.629403Hz
Resolution, 0.153-0.175: 384x224 @ 59.637405Hz
TG Game Entry: https://www.twingalaxies.com/scores....%20Loop%202%20[Japan%20010205]
Rules, Points [Power Mode]: https://www.twingalaxies.com/scores.php?scores=78995
Rules, Points [Stage Mode]: https://www.twingalaxies.com/scores.php?scores=78996
Rules, Points [Tokoton Mode]: https://www.twingalaxies.com/scores.php?scores=78997
Puzz Loop 2 (Japan 010226)
--------------------------
Note: not currently represented on TG.
ROM set changed: no. Added in 0.145u2.
0.145u2-0.176: pzloop2j - "Puzz Loop 2 (Japan 010226)"
Resolution, 0.146-0.152: 384x224 @ 59.629403Hz
Resolution, 0.153-0.176: 384x224 @ 59.637405Hz
Rules: [no current tracks]